Hacking [RELEASE] UWUVCI + Injectiine

[NicoAICP]

hmm, try winrar then.

 

[TheArchivist]

I’m new to this, and tried to search through the thread as best I could, but couldn’t find a direct answer to my issue. What is the current state of SNES injection? Every game I inject appears to come out fine, and installs on my Wii U without error, but when I try to launch it, I get the message, “There is an error in the softwares data. Restart the console and delete the data for this software.” Has anyone else run into this? Iv’e tried every different option I can think of to troubleshoot, but always get the same result.

The only thing that strikes me as odd is that the Retroinject.exe only flashes for half a second before closing. For all I know, that could be how it’s supposed to behave. Seems more likely that it’s not actually running though.

 

[NicoAICP]

I’m new to this, and tried to search through the thread as best I could, but couldn’t find a direct answer to my issue. What is the current state of SNES injection? Every game I inject appears to come out fine, and installs on my Wii U without error, but when I try to launch it, I get the message, “There is an error in the softwares data. Restart the console and delete the data for this software.” Has anyone else run into this? Iv’e tried every different option I can think of to troubleshoot, but always get the same result.

The only thing that strikes me as odd is that the Retroinject.exe only flashes for half a second before closing. For all I know, that could be how it’s supposed to behave. Seems more likely that it’s not actually running though.

THanks for that issue reöort. Retro Inject shouldnt flash, it shall be there for atleast 10 seconds. i will take a look into this problem, what will probably fixed when the UI version releases.

 

[coolmario]

I put my gba rom in the files folder, yet it says that there isn't any rom in the files folder and aborts.

 

[NicoAICP]

I put my gba rom in the files folder, yet it says that there isn't any rom in the files folder and aborts.

THis issue is known and already fixed in the currently not finished unreleased private gba vc c# rewrite

 

[light_kun]

Hey not sure how to fix this error? I've only inputted the Wii U Common Key and DKC 64 (PAL) title key, then pressed download. The window below pops up:

 

[NicoAICP]

Hey not sure how to fix this error? I've only inputted the Wii U Common Key and DKC 64 (PAL) title key, then pressed download. The window below pops up:

View attachment 137154

Doy ou have the newest version of java installed?

 

[WesMods]

This tool contains following VC Injectors:
Wii VC
NDS VC
SNES/NES VC
N64 VC
GBA VC

This is now community based, that means you can contribute to it!
https://github.com/Hotbrawl20/Ultimate-WiiU-VC-Injectors

NEWS: Searching for Beta testers, who have CFW and are willing to risk a brick or a corrupted usb drive. (last 2 options are probably the gba version that might cause it) If you want to join as a Beta tester, message me on GBAtemp or Discord (NicoAICP#9811)
Friendly Reminder: always install to usb, if the game is corrupted (wiiu freezing when loading in homemenu) and it's installed to the nand there is a bricking risk (like with every other programm you install to the nand using wup installer, there is that risk)

We have a website and a discord server

For support join the Discord and ask for support there

Super FX games like the starfox snes games or dsi enchanced like pokemon black wont work with the injectors, cause the wiiu doesnt support them.
Atm games like pokemon are injectable into gba vc but will only boot to a white screen.

Thanks to @KhaderWelaye for allowing me to add the Wii VC Injector to this tool

Download v1 C#
Download N64 VC Injector - Open Beta

Issue Formula
Working Formula (Only reply to this if the injection worked)


Changelog:
v0.0.1 - Release
v0.0.1.2 - little update of some tools
v0.0.1.3 - added one base rom to NDS, remade N64 injector, fixed some SNES/NES Injector bugs
v0.0.1.3.1 - should fix cant find inject_rom_pmeu (even tho it was there ;A; )
v0.0.1.4 - should have fixed the n64 injector now
v0.0.1.4.1 - this time it should be fixed
v0.0.1.4.2 - n64 fix (again)
v0.0.1.5 - final n64 fix
v0.0.1.6 - Remade NDS and N64 Injector
v0.0.1.6.1 - fixed NDS and N64 Injector bugs
v0.0.1.6.2 - fixed N64 F-Zero X issue
v0.0.1.6.3 - removed the need of SDK tools for SNES/NES, added newest version of the Wii VC injector
v0.0.1.6.4 - added protection to the SNES/NES injector that the error is not a game doesnt happen
v1 - Added GBA VC injector, which means that you can inject into all now.
v1.1 - Last Batch version, shall fix all injectors this time
v1 C# - Added Launcher, NDS and N64 C# Injector

I can help with testing games if you like, I ain't afraid of no brick (Dun-na-na-na-na-na..Dunna-nana-na-na-na)
Also, wondering if there is a way to inject Arcade roms to play like a VC title, such as The Simpsons arcade game, X-men, TMNT, WWF etc?

 

[light_kun]

Thanks Nico, that fixed that error message! However, when trying to install the WUP files, I get an error saying to verify the WUP files are correct and complete. Any ideas for this part? Installing Mario Party 3.

I believe I've followed all the steps correctly in getting the header to match Mario Party 2 (changing it to NMVE), but I may have used the wrong INI file...where would I be able to find the Mario Party 2 by Nintendo INI? It's not downloadable from the Compatibility list.

I used this INI file linked: https://pastebin.com/nWRmbyCy

Thanks again.

 

[WesMods]

Thanks Nico, that fixed that error message! However, when trying to install the WUP files, I get an error saying to verify the WUP files are correct and complete. Any ideas for this part? Installing Mario Party 3.

I believe I've followed all the steps correctly in getting the header to match Mario Party 2 (changing it to NMVE), but I may have used the wrong INI file...where would I be able to find the Mario Party 2 by Nintendo INI? It's not downloadable from the Compatibility list.

Thanks again.

whats is the folder structure you have setup look like?
In your "Install" folder each game should have a folder with all the files on the root of each folder, can you confirm that for me? should be like:
SD:\Install\WUP-N-BOOT_000500029421FFF0\lots of files, .app, .cert, .h3, .tik, .tmd (no folders)

My Process is always:
-Load HomeBrew Launcher
-Load WUPInstallerGX2
-Install selected injects to USB

 

[light_kun]

whats is the folder structure you have setup look like?
In your "Install" folder each game should have a folder with all the files on the root of each folder, can you confirm that for me? should be like:
SD:\Install\WUP-N-BOOT_000500029421FFF0\lots of files, .app, .cert, .h3, .tik, .tmd (no folders)

My Process is always:
-Load HomeBrew Launcher
-Load WUPInstallerGX2
-Install selected injects to USB

This is what's in the folder:

Thanks for looking into this. I've installed several other WUPS and they've worked. However this is my first N64 one. And yup I've followed those exact steps listed.

 

[WesMods]

This is what's in the folder:

View attachment 137397

Thanks for looking into this. I've installed several other WUPS and they've worked. However this is my first N64 one. And yup I've followed those exact steps listed.

You may want to retry that, the sizes of the files seem way too small. It may also be a bad dump/rom
Nvm, the size is about right actually, my math was wrong there.
Still give it another try tho, that game works fine for me

 

[light_kun]

You may want to retry that, the sizes of the files seem way too small. It may also be a bad dump/rom
Nvm, the size is about right actually, my math was wrong there.
Still give it another try tho, that game works fine for me

Yeah just tried injecting it 2-3 more times with a new ROM/dump too. No luck. Oh well it was worth a shot. Thanks everyone

 

[NicoAICP]

Thanks Nico, that fixed that error message! However, when trying to install the WUP files, I get an error saying to verify the WUP files are correct and complete. Any ideas for this part? Installing Mario Party 3.

I believe I've followed all the steps correctly in getting the header to match Mario Party 2 (changing it to NMVE), but I may have used the wrong INI file...where would I be able to find the Mario Party 2 by Nintendo INI? It's not downloadable from the Compatibility list.

I used this INI file linked: https://pastebin.com/nWRmbyCy

Thanks again.

Actually last time i tried injecting it it didnt work either. i need to look into it by myself.

 

[WesMods]

Actually last time i tried injecting it it didnt work either. i need to look into it by myself.

Which game are you guys using for the donor game? I used Donkey Kong 64 with Mario Party 2 ini

"Open Mario Party 3 ntsc rom and change the header to match Mario Party 2 header, then open mario party 2 ini by nintendo and change backup type to 0 and backupsize to 2048"

 

[light_kun]

Hm I just used Injectiine using the same files I originally had, and it worked. Still a great program Nico!

 

[NicoAICP]

yo, wussup, i finally made an update to the nds vc injector. it works fine on my end. please report bugs as always, since its a beta i would appreciate more bug reports than in main releases. Download

 

[DarthDub]

yo, wussup, i finally made an update to the nds vc injector. it works fine on my end. please report bugs as always, since its a beta i would appreciate more bug reports than in main releases. Download

I'll try this tomorrow, ping me on Discord to remind me.

 

[NicoAICP]

I'll try this tomorrow, ping me on Discord to remind me.

sure, by the time you are back there will be a n64 fix out too proabbly

 

[NicoAICP]

fixed N64 release. includes working NDS version
https://drive.google.com/open?id=1LvyKmlSlo4A1zcnYz4aGm3lBwLP2iBXP