Tutorial  Updated

How to modify Minecraft: Bedrock Edition (Infinite Chunks, Custom Assets, etc)

Since this version is a direct port of PE/W10/Xbone, the possibility of things like this are the same. Minecraft: BE stores things in save files the same across W10 and Switch, so, you can basically add any skin pack, texture/resource pack, and world you want. You can also change the GFX settings beyond their limits.
---

Requirements:
Checkpoint / Any save dumper/restore tool.
Minecraft BE (obviously)
Hekate / Any way to launch Homebrew
---
Universal Steps: (These are steps that you need to take regardless of what you're trying to do.)

1. First, open Minecraft and make a change to any setting so that it definitely creates a config file, as well as a save file.

2. Restart your switch into RCM and boot to your favorite Homebrew launcher.

3. Open your save dumper (ex. Checkpoint) and Dump / Backup your save for Minecraft: BE (not Nintendo Switch edition if you have the old version)

4. Turn off your switch, and open your SD card on your PC. (You can use Rajkosto's memloader payload to access your micro-sd from your PC. You also need Hacdiskmount from Rajkosto.)

5. Navigate to "sd:/switch/Checkpoint/saves/0x0100D71004694000 Minecraft/WhateverYouNamedYourSave".

6. This is the folder that you are going to be modifying.

Custom Skin Pack Steps:
1. Download this YouTuber skin pack. This is going to be the base for your own.

2. Open the downloaded .mcpack file in something like WinRAR.

3. Choose someone's skin to replace, and remember the name EXACTLY.

4. Delete it, and place your own skin in there. (MUST be in .png format)

5. Rename it to exactly what the person you deleted was. (Example: skin2945274983.png is now truemu.png)

6. Close the .mcpack archive, and place it in "sd:/switch/Checkpoint/saves/0x0100D71004694000 Minecraft/WhateverYouNamedYourSave/skin_packs"

7. You now have your custom skin pack with your replaced skin(s).

8. Re-inject save file using Checkpoint if you are done modifying.

Infinite Chunks / Custom Video Settings

(Note: Your game may slow down if you increase your GFX limits. I haven't noticed it, though.)
1. Navigate to "sd:/switch/Checkpoint/saves/0x0100D71004694000 Minecraft/WhateverYouNamedYourSave/minecraftpe" and open "options.txt" in something like Notepad ++.

(I'll only be showing you how to change render distance / chunks.)

2. Look for the line gfx_viewdistance:xxx.

3. Whatever your number is right now, dividing it by 16 will equal your in-game render distance. So, if you want 24 chunks as your render distance (instead of the max 14), you would enter 384. (384 ÷ 16 = 24, or 24 x 16 = 384. | 24 is our intended render distance.)


4. Once you enter your intended render distance (384 in my case) go ahead and save the file and you're done. Feel free to mess around further.

5. Re-inject save file using Checkpoint if you are done modifying.

Custom Texture/Resource Packs
(Note: Some resource packs will cause your game to error out, and will always error out upon opening, making it unplayable. Just re-inject the save file, since the broken resource pack wasn't applied at the time of backing up, obviously. I've only seen this happen when using "shader" packs. They're bullshit.)


1. Download your resource pack(s) of choice. Always try to use .mcpack format.

I haven't tested zips/folders, but, if you can only find a zip, and not an .mcpack file: extract the zipped texture pack into a folder with an appropriate name. (Ex. Faithful64.zip would have a folder named Faithful64.) Then, extract all files in the zip (one should be named pack_icon.png unless it doesn't have an icon) and place the extracted files in the root of that new folder. Place that "Faithful64" (example) folder into
"sd:/switch/Checkpoint/saves/0x0100D71004694000 Minecraft/WhateverYouNamedYourSave/games/com.mojang/resource_packs". The resource pack, if done correctly, may now show up in game.

2. If using a .mcpack (recommended), simply place it in "sd:/switch/Checkpoint/saves/0x0100D71004694000 Minecraft/WhateverYouNamedYourSave/games/com.mojang/resource_packs". Your resource pack should now appear in the "Resource Packs" section of the menu in-game.

3. Re-inject save file using Checkpoint if you are done modifying.

Custom/Ported Worlds from other Versions
Ported from PE / Windows 10:

1. Your world can either be a world from PE/Windows 10 (random letters/numbers/symbols folder) or a downloader world. (.mcworld)

2. If its ported from PE/W10, just simply drop the folder in "sd:/switch/Checkpoint/saves/0x0100D71004694000 Minecraft/WhateverYouNamedYourSave/games/com.mojang/minecraftWorlds".

3. Re-inject save file using Checkpoint if you are done modifying.

4. The world should then show up in Minecraft.

Downloaded (.mcworld format file):

5. If it's in .mcworld format, open it in something like WinRAR, and extract it to the root of an appropriately named folder. (DropperWorld.mcworld would have a folder named DropperWorld.)

6. Drop that newly created folder, with all the files from the .mcworld in it, into "sd:/switch/Checkpoint/saves/0x0100D71004694000 Minecraft/WhateverYouNamedYourSave/games/com.mojang/minecraftWorlds".

7. Re-inject save file using Checkpoint if you are done modifying.

8. The world should then show up in Minecraft.



That's it! You now have a custom skin pack, custom resource pack, and modified video settings. You can also add custom worlds, probably using the .mcpack format, but I'm not sure since I haven't tested. I'll edit the post if I'm able to drag-and-drop one of my world from the Windows 10 Edition into the minecraftWorlds folder on the sdcard.

Edit: Yep, you can also add custom worlds to this version! I dragged and dropped one from Windows 10 Editon, and it worked just fine. It was also from an older version of the game...

Edit 2: Warning from a user on Reddit: ALWAYS keep a backup, because apparently you can't just restore a save with just the mcpack and nothing else, otherwise your worlds and Xbox Live connection will be lost. You need to import the entire save folder altogether, including your worlds and other data. (Obviously I made a backup so I didn't lose anything.)
 
Last edited by GalaxyYT,

Nerdtendo

Your friendly neighborhood idiot
Member
Joined
Sep 29, 2016
Messages
1,762
Trophies
1
XP
4,592
Country
United States
Is it possible to get mods of yesteryear to work? I remember some mods from way back when that I wanted to try but lacked the expertise for.
 
D

Deleted User

Guest
lmao i feel like people are going to buy the dlc in the store and share it for free xD
 
D

Deleted User

Guest
@GalaxyYT do i have to edit the udid in order to make skinpack not overwrite each other or what?
upload_2018-6-21_20-57-5.png
 

LordVe

Member
Newcomer
Joined
May 28, 2018
Messages
22
Trophies
0
Age
43
XP
544
Country
United States
Note: Anyone who just wants to change their skin and has Win10 edition:

  • Set your Custom Skin in WIN10 edition.
  • Get your save from checkpoint. Go here: SDCard:\switch\Checkpoint\saves\0x0100D71004694000 Minecraft\<Whatever saved the Backup as>\games\com.mojang\minecraftpe\
  • Open options.txt
  • Look for: game_lastcustomskinnew: and game_skintypefull:
  • change the values to: c18e65aa-7b21-4637-9b63-8ad63622ef01_Custom
  • save options.txt
  • copy C:\Users\<User>\AppData\Local\Packages\Microsoft.MinecraftUWP_8wekyb3d8bbwe\LocalState\games\com.mojang\minecraftpe\custom.png to the same folder as options.txt (Note: Your Microsoft.MinecraftUWP may have a different signature.)
  • restore Save using Checkpoint
  • restart Console ( I Don't know if you have to do this anymore)
  • You should now have the same skin you did on your PC...
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    Xdqwerty @ Xdqwerty: I may take a shower to remove all the sunburns in my body