Hacking [RCM] hekate-ipl for 5.0.x + working hb menu

[isoboy]

Just poping this out there when i used this don't know if it had something to do with going into rcm but my right joycon now everytime it shows full charged will die with in less then a few min if i'm lucky it will last 30min or 20.

I'm not saying it's the battery but it's the battery.

 

[BelmontSlayer]

Did you mod your joy con or are you using another method to access cfw? just wandering, maybe its something to do with modding the joy con I soldered it. Actually if I boot the switch up normally with both joy cons attached it shows as if the right one is not fully attached? somethings not working right?

I bent pin 9 to 10 on my right joycon, it sounds like something didn't go right with soldering. So the joycon works wirelessly but not docked? I've seen a couple people mention a similar issue after soldering the joycon. Replacement joycon rails are cheap!

 

[Deleted User]

My console is on 5.0.2, yes. That's why I started with support for 5.0.x not lower. But I do have everything I need to make a 4.x release, I just need to reverse engineer the firmware and make the code required.

 

[Funnymouth659]

someone got the appstore working?

Appstore is working for me (5.0.2)

 

[Naminave]

My console is on 5.0.2, yes. That's why I started with support for 5.0.x not lower. But I do have everything I need to make a 4.x release, I just need to reverse engineer the firmware and make the code required.

Yesterday I was going to send you a message to give support with my switch that is in 4.1 but I hope someone can help you with that because I do not have MicroSd

 

[ExploitTnT]

My console is on 5.0.2, yes. That's why I started with support for 5.0.x not lower. But I do have everything I need to make a 4.x release, I just need to reverse engineer the firmware and make the code required.

Would a Nand backup help.?

 

[horokeusama]

Has anybody managed to make Retroarch work with this?

Also, thank you very much for contributing with the scene.

 

[Naminave]

Would a Nand backup help.?

Maybe the update package next to the operating OS, as I read there.

 

[Deleted User]

I only need a BOOT0 dump, which I already have for 4.x. I don't have one for 3.0.1-3.0.2 though, so I wont be able to port it for that.

 

[Samus20XX]

I will not wait like 1 month or weeks just for homebrew I WILL UPDATE

Do it then. Update your switch. You're acting like this is gonna have a personal effect on him ROFL

 

[Naminave]

The strange thing is that they have not noticed that you can not downgrade the system, if in the given case they have a backup of their previous FW, since they still have been panic by the fuses.

 

[BelmontSlayer]

My console is on 5.0.2, yes. That's why I started with support for 5.0.x not lower. But I do have everything I need to make a 4.x release, I just need to reverse engineer the firmware and make the code required.

Can you please add the commits linked earlier in this thread to clear the boot history so Nintendo won't know it's been booted from RCM?

 

[Dread_Pirate_PJ]

Did you mod your joy con or are you using another method to access cfw? just wandering, maybe its something to do with modding the joy con I soldered it. Actually if I boot the switch up normally with both joy cons attached it shows as if the right one is not fully attached? somethings not working right?

Shorting the pins on the joycon in any way (either soldering or bending the pins) makes them no longer attach. It's a known issue.

 

[nachuz]

This should be called GBArchive where it shares dumps for the preservation of the system. Make overturned because you never know that another way could have compatibility, also, this serves so that in the future there may be a CFW Downgrade

Downgrade is imposible because of efuses
Also I hope that never happend because of copyrighted files

 

[Vorde]

Downgrade is imposible because of efuses
Also I hope that never happend because of copyrighted files

Its not impossible but the firmware would need to be patched or hacked in a way that would bypass the verification of fuses, while also keeping the encryption intact and the checksum the same

 

[Reecey]

Shorting the pins on the joycon in any way (either soldering or bending the pins) makes them no longer attach. It's a known issue.

So basically you cant use cfw properly with them attached, if you have modded your right joy con? It works fine with them in wireless but nothing works with them docked to the switch. Is there any solution to trick the switch into thinking the right hand side is docked?

 

[nachuz]

Didn't 4.X files released this morning? Why HB for 4.X isn't ready yet?

 

[M7L7NK7]

Dude be patient!

 

[Sonicbrawler]

Very exciting!

 

[James310]

Now does this work for any 4.x systems ?