Homebrew Problem with boot9strap installation...

[Jackpot3000]

i followed the plailect's guide for installig boot9strap for arm9loaderhax.but when i want to launch luma
chain loader menu by HOLDING START but it crash..

Sorry for lmy bad english i'm french xD

 

[Deleted User]

i followed the plailect's guide for installig boot9strap for arm9loaderhax.but when i want to launch luma
chain loader menu by HOLDING START but it crash..

Sorry for lmy bad english i'm french xD

Have you installed B9S yet? Or are you trying to install it using the installer payload?

Have you renamed the payloads appropriately?

 

[Jackpot3000]

No i'm trying to install it and i renamed all the payloads appropriately

 

[Deleted User]

No i'm trying to install it and i renamed all the payloads appropriately

Have you double-checked to make sure that all items listed in the guide are on your SD Card? Double-check to make sure you haven't skipped anything.

Does it do this on multiple attempts?

 

[Jackpot3000]

When i start luma chainloader it says : an exception occurred

Processor: ARM9

Exception type: data abort

 

[Deleted User]

When i start luma chainloader it says : an exception occurred

Processor: ARM9

Exception type: data abort

Boot into Luma -> Hold SELECT -> Disable Exception Handlers. After that, try running the payload again and see what happens.

 

[PabloMK7]

Wait, you said you renamed things? What did you rename?

 

[Jackpot3000]

Wait, you said you renamed things? What did you rename?

i renamed SafeB9SInstaller.bin into start_SafeB9SInstaller.bin

Boot into Luma -> Hold SELECT -> Disable Exception Handlers. After that, try running the payload again and see what happens.

it was already disabled

 

[PabloMK7]

i renamed SafeB9SInstaller.bin into start_SafeB9SInstaller.bin

Place SafeB9SInstaller.bin in your SD root and rename it to arm9loaderhax.bin

 

[Jackpot3000]

Place SafeB9SInstaller.bin in your SD root and rename it to arm9loaderhax.bin

THANKS DUDE YOUR A F***ING GENIUS also thank to bipes man

 

[tamatomo]

I don't want to steal your post or anything but I'm having the same problem and can't seem to fix it (since it started as the same error I thought I shouldn't make a new thread).
I tried what you guys told OP to do but it didnt do anything/it crashed.
Now, sometimes I don't get the exception error (the guide mentions deleting all .bin files from the /luma/payloads/ folder once you place GodMode9.firm; when I did that I got the exception error but I tried leaving those files and following the rest of the guide which lets me launch the Luma Chainloader menu) and can select SafeB9Installer on Luma Chainloader menu, but all I get is a black screen and it doesn't install. Any ideas?

 

[Stephano]

I don't want to steal your post or anything but I'm having the same problem and can't seem to fix it (since it started as the same error I thought I shouldn't make a new thread).
I tried what you guys told OP to do but it didnt do anything/it crashed.
Now, sometimes I don't get the exception error (the guide mentions deleting all .bin files from the /luma/payloads/ folder once you place GodMode9.firm; when I did that I got the exception error but I tried leaving those files and following the rest of the guide which lets me launch the Luma Chainloader menu) and can select SafeB9Installer on Luma Chainloader menu, but all I get is a black screen and it doesn't install. Any ideas?

Have you checked to make sure all the files are in the right place?
On some other threads, i saw that people were able to solve some issues by redownloading some of the files. I would give that a shot.
Also, welcome to the Temp

 

[Jackpot3000]

I don't want to steal your post or anything but I'm having the same problem and can't seem to fix it (since it started as the same error I thought I shouldn't make a new thread).
I tried what you guys told OP to do but it didnt do anything/it crashed.
Now, sometimes I don't get the exception error (the guide mentions deleting all .bin files from the /luma/payloads/ folder once you place GodMode9.firm; when I did that I got the exception error but I tried leaving those files and following the rest of the guide which lets me launch the Luma Chainloader menu) and can select SafeB9Installer on Luma Chainloader menu, but all I get is a black screen and it doesn't install. Any ideas?

Place SafeB9SInstaller.bin into the root of your SD Card and rename it into arm9loaderhax.bin then launch luma chain loader

 

[tamatomo]

Have you checked to make sure all the files are in the right place?
On some other threads, i saw that people were able to solve some issues by redownloading some of the files. I would give that a shot.
Also, welcome to the Temp

Thanks! And yeah, I already did check, like 3 times. It's driving me nuts. I will try redownloading the files to see if that fixes it.

Place SafeB9SInstaller.bin into the root of your SD Card and rename it into arm9loaderhax.bin then launch luma chain loader

As I said before, I already tried that, thanks anyways.

 

[Stephano]

Thanks! And yeah, I already did check, like 3 times. It's driving me nuts. I will try redownloading the files to see if that fixes it.

best of luck.

 

[tamatomo]

I redownloaded the files, still nothing. I will keep an eye out to see if someone else had the same problem and if they fixed it in some other way.

 

[artlan]

Not sure anyone here was still having the problem - but I ran into tonight myself. It also effected any .bin I tried to load through the chainloader.
I was on the last Luma 7.0.5 hourly build - I finally resolved it by downgrading to Luma 6.6, then all my payloads worked again and I was able to install B9S without further issues an and now successfully on Luma 7.1

 

[Jordan Wessley]

I redownloaded the files, still nothing. I will keep an eye out to see if someone else had the same problem and if they fixed it in some other way.

Hit it with a hammer yet?

 

[metal_overlord]

Not sure anyone here was still having the problem - but I ran into tonight myself. It also effected any .bin I tried to load through the chainloader.
I was on the last Luma 7.0.5 hourly build - I finally resolved it by downgrading to Luma 6.6, then all my payloads worked again and I was able to install B9S without further issues an and now successfully on Luma 7.1

sooy but what do i need to do to downgrade luma 7.0.5 to 6.6 . i believe i'm having the same problem as you are

 

[Starofcastor]

Thanks! And yeah, I already did check, like 3 times. It's driving me nuts. I will try redownloading the files to see if that fixes it.

As I said before, I already tried that, thanks anyways.

Had a similiar problem, what helped me was clearing the home menu extdata on the sd card. Tutorial can be found on 3ds hacks guide in the troubleshoot section (can't paste link because i'm a new commer to the forum)