Homebrew Retroarch Emulation Thread (Nightly Builds Included)

[Manurocker95]

The newer pcsx rearmed cia uses SCPH5500, 5501 en 5502

You can find the hashes under information, core information

And if that does not fix it you can also backup your saves, delete the retroarch folder and use the retroarch folder from the newer builds, and see if that helps.

Gonna try and report. Thanks!

 

[Sascha1992]

Look for a Complete PSX Bios Set and psx emu works fine .

 

[Manurocker95]

still not working. I placed all the cores in retroarch > cores > system. Am I wrong or something?

 

[Greymane]

still not working. I placed all the cores in retroarch > cores > system. Am I wrong or something?

It should work without placing them there, also after you have placed them there have you changed the path for the core in the directory?
Since if you change where the cores are, they wont be found if the config has the wrong path.

 

[Manurocker95]

It should work without placing them there, also after you have placed them there have you changed the path for the core in the directory?
Since if you change where the cores are, they wont be found if the config has the wrong path.

Nope. How do I check that? I didn't touch anything but just to know :\ It only returns to Homemenu everytime I try to load a game :C

 

[Greymane]

Nope. How do I check that? I didn't touch anything but just to know :\ It only returns to Homemenu everytime I try to load a game :C

You can check/change the path under Settings/Directory/core while in the emulator, also are you thrown to the home menu without or with an error?

 

[Manurocker95]

You can check/change the path under Settings/Directory/core while in the emulator, also are you thrown to the home menu without or with an error?

without error.

 

[Greymane]

without error.

hmmm odd, not even one in the lower screen just before the kick? Well then short of the nuke option.
if you have your save games backup-ed delete the emu's and retroarch folder, place the retroarch folder of the new builds on the micro/sd card.
Place the bios files where they are needed don't change anything else at the time, and re-install the emu's and see if the path for the bios files are correct.
Btw have you checked if the iso's are not broken? Cause sometimes they can be bad.

 

[Manurocker95]

hmmm odd, not even one in the lower screen just before the kick? Well then short of the nuke option.
if you have your save games backup-ed delete the emu's and retroarch folder, place the retroarch folder of the new builds on the micro/sd card.
Place the bios files where they are needed don't change anything else at the time, and re-install the emu's and see if the path for the bios files are correct.
Btw have you checked if the iso's are not broken? Cause sometimes they can be bad.

Done. Not working either. My ISOs worked in a previous version of pcsx and they work on PC so they are not bad :/

 

[Greymane]

Done. Not working either. My ISOs worked in a previous version of pcsx and they work on PC so they are not bad :/

Then its at least not the iso's, are you using 3/2ds or n3ds, are you using stable or nightly versions of the emu's and which cfw are you using.

 

[Manurocker95]

Then its at least not the iso's, are you using 3/2ds or n3ds, are you using stable or nightly versions of the emu's and which cfw are you using.

New 3DS XL on 11.4 with Luma (Latest hourly build for fixing GBA_Firm and TWL_Firm Boot) a9lh.

 

[Greymane]

New 3DS XL on 11.4 with Luma (Latest hourly build for fixing GBA_Firm and TWL_Firm Boot) a9lh.

Hmmm odd then it should work since that is what i have except for the a9hl.
like i said a little back, try to see if retroarch shows an error in the lower screen before the kick.
It will be hard to catch since almost the same instance the kick will happen.

Since you have done a clean install it should be correct, but make sure that the paths in Settings/directory are going where they should.
And the bios files are case sensitive i forgot to say that, you can see if the emulator has found them under Main menu/Information/Core information.

 

[Manurocker95]

Hmmm odd then it should work since that is what i have except for the a9hl.
like i said a little back, try to see if retroarch shows an error in the lower screen before the kick.
It will be hard to catch since almost the same instance the kick will happen.

Since you have done a clean install it should be correct, but make sure that the paths in Settings/directory are going where they should.
And the bios files are case sensitive i forgot to say that, you can see if the emulator has found them under Main menu/Information/Core information.

Checking the bottom screen I'm kicked with something like mmap() failed to load file or something like that. In the information menu I only have Cursor manager, database manager and system info. Where should be the core?

 

[Greymane]

Checking the bottom screen I'm kicked with something like mmap() failed to load file or something like that. In the information menu I only have Cursor manager, database manager and system info. Where should be the core?

That would be the error pcsx rearmed had a while back, which means that the cia's them self are bad.
Download the newest nightly from today 18:22, i just downloaded and installed the pcsx from this one and the error isn't present for me.

 

[Manurocker95]

That would be the error pcsx rearmed had a while back, which means that the cia's them self are bad.
Download the newest nightly from today 18:22, i just downloaded and installed the pcsx from this one and the error isn't present for me.

Gonna try and see :S

 

[jamespoo]

thank you

 

[Clydefrosch]

anyone know if theres an option in quicknes to prevent slowdown from too many sprites on screen?
like in megaman 1, cutmans stage, the rooms with all those red cross-shaped enemies, once you start adding your plasma beam pellets, it slows down.

 

[juniorcba]

DSP dumper dumps a .cdc file, retroarch asks for a .bin file when I go choose a DSP plugin. Whats with that? Should I change the extension?

 

[ZoMbiERD]

Guys, please, need some help, can't find solution anywhere. Any version of Retroarch, other than 1.3.3, doesn't work at my n3ds 11.2 with soundhax. Tried every newer stable releases, and a lot of nightly builds. After rom selection, EVERY core just show me message "Does not have enough samples for monitor refresh rate estimation. Requires to run for at least 4096 frames". And that's it, program just closing after pushing Start. Whatta hell? 1.3.3 works great.

 

[pedro702]

just wondering has there been any speed improvement on sega 32x "3d" games on picodrive? i remenber playing starwars arcade very slowly.

Also jsut for a random question what is the psx emu speed average?