Hacking Can't configure Luma after installing A9LH.

[Enlapse]

Good evening1

Well, I have a problem. After doing step-by-step the whole guide, and solving many problems I have encountered, now it seems I got into one I can not solve, so I need some help.

After installing A9LH, and trying to do : <<Boot your device while holding (Select) to enter the Luma3DS configuration menu>>, first I had a black screen, I went to the troubleshoot page and solved it (did I? - by removing the folder that was in 00000000 (at extdata)) and now, if I turn off the 3DS, press select (holding it) and the power on button, I get to sysNand, even if I hold the power on button until the sysNand boots. No matter what, I can not get to the Luma configuration menu.

I'm using a 2.1.0-4E Old3DS. I think I may have left to put in something in the SDCard even knowing I read the prep step twice. Maybe something with luma? This is what I have from luma:

> /arm9loaderhax.bin
> /luma/payloads/start_GodMode9.bin (anything else, just that file)
> /luma/ is empty (well, it has the payloads folder with the file in it, but nothing else).

Thank you for your help.

 

[Redferne]

- snip -
Misread.

To summarize, when you press Select, hold it and press the power button nothing happen, you boot to SysNAND?
If I understood that correctly I suggest you copy the arm9loaderhax.bin from the Luma zip again on your SD card.

If it still doesn't work I guess your A9LH installation failed. Go back to
Section II - Installing arm9loaderhax

 

[Deleted User]

Make shure your sd card isn't locked (the slider thing) if it isn't then check to see if its corrupted.

 

[Enlapse]

- snip -
Misread.

To summarize, when you press Select, hold it and press the power button nothing happen, you boot to SysNAND?
If I understood that correctly I suggest you copy the arm9loaderhax.bin from the Luma zip again on your SD card.

If it still doesn't work I guess your A9LH installation failed. Go back to
Section II - Installing arm9loaderhax

Okay, you were absolutely correct. It wasn't the install itself, but the lack of the payloads from a9hl release (because I downloaded it, but I misunderstood the guide and didn't do the step 9 so when I tried to install (the time I did it, I got a glitched screen - What a luck I have! haha, so I couldn't read I had an error form a file missing.).

9. Copy the contents of the arm9loaderhax release .7z to a9lh folder on your SD card

So I did that, and it worked. Now I have the menu!

Thank you very much!

Make shure your sd card isn't locked (the slider thing) if it isn't then check to see if its corrupted.

Thank you anyways, but the SD card was OK!