Hacking F##* up my new3DS

[Natsuru]

All went fine eccept the section below but i already dit this the last time.

View attachment 78246

There is 2 things to do this the image you posted. 1st put a9lh bin in CTR NAND.
It should look like this:

2nd dump the DSP.
In the 3ds folder on the SD card you should have a file called dspfirm.cdc

If the files are the same as in my images your are done. If not whats missing or what happened the last time.

 

[Meliodas2255]

if you checked that you have arm9loaderhax.bin in CTR NAND. try rebooting your system without the sd card. and hold select. if you boot to Luma then forget it. if you don't then replace the arm9loaderhax.bin in CTR NAND.

Other than that, glad to see you have your 3ds working again. I can't stress enough the importance of making a back up of your sd files from time to time as SD Cards will fail or become corrupted without notice.

 

[Natsuru]

Also make sure you are using v6.6
https://github.com/AuroraWright/arm9loaderhax/releases/tag/17/10
6.6 is needed for sd less boot

 

[sqloud]

In the guide it says to dump DSP with the homebrew launcher but when i boot HBL i get an error message.
I'm not at home now so i can check the error message and post it when i get home.

--------------------- MERGED ---------------------------

Again thanks for all the help, also the people who declared me stupid.
Next time i want to clean things up i will think twice and won't.

 

[Distrance]

In the guide it says to dump DSP with the homebrew launcher but when i boot HBL i get an error message.

HBL doesn't work on 11.3 if Clock+L2 is enabled on Luma settings. As the guide instructs you to enable this if you use N3DS I'm inclined to believe you have it enabled. Disable it in order to access HBL. Once you've done DSPDump though you should enable it again because really, you won't need HBL for anything.

 

[cainan__c]

The system boots with the original SD card but freezes up after a few seconds.

This also happens with a faulty game card [i experienced the game card crash with a water damaged dry ds card (no cfw)] or well memory corruption
OR DELETING THINGS FROM NAND!
Try Booting with out a gamecard in
PS:My Brother has a DSi and all apps would crash the system [even settings]

 

[Distrance]

snip

You know this has been solved already? Would do you well to read few of the latest posts instead of just replying to the first post in any thread.

 

[sqloud]

This is the error I get opening HBL.
Disabled clock+L2 before trying.

 

[Distrance]

This is the error I get opening HBL.
Disabled clock+L2 before trying.

Do you have the latest Homebrew Loader? 1.3 is latest. Also you must be connected to wifi for it to be able to download payloads.

Even if you can't get it working I wouldn't stress over it too much. You don't NEED HBL for anything, and DSP Dump is not essential. Without it you can't hear sound in Homebrew apps so it doesn't apply to games .. Pretty minor setback considering most apps don't even have sounds.

 

[dAVID_]

What exactly did you delete, i deleted something from the private folder and my 2ds is still alive!(In the sd card).

 

[Natsuru]

Distrance, every time, every time. Too damn fast.

 

[Distrance]

Distrance, every time, every time. Too damn fast.

I'm pretty bored right now so I'm just stalking the subforums and replying to threads as they pop up. You'll get your change when I get bored of this too ..

What exactly did you delete, i deleted something from the private folder and my 2ds is still alive!(In the sd card).

Like I said above, this has been solved already. Doesn't really matter what he deleted.

 

[OldSchoolTech]

This is the error I get opening HBL.
Disabled clock+L2 before trying.

Use soundhax to launch it or else get hblauncher_loader 1.3 as said above. It's likely 1.2 you're using. Soundhax still works to launch it either way as long as you have the payload on the SD card.

 

[BL4Z3D247]

HBL doesn't work on 11.3 if Clock+L2 is enabled on Luma settings. As the guide instructs you to enable this if you use N3DS I'm inclined to believe you have it enabled. Disable it in order to access HBL. Once you've done DSPDump though you should enable it again because really, you won't need HBL for anything.

That's weird, I'm able to use the HBL on 11.3 with the *hax 2.9 payload and hblauncher_loader v1.3 with Clock+L2 enabled in Luma.

 

[OldSchoolTech]

That's weird, I'm able to use the HBL on 11.3 with the *hax 2.9 payload and hblauncher_loader v1.3 with Clock+L2 enabled in Luma.

It works on the Luma hourly on mine.

 

[BL4Z3D247]

It works on the Luma hourly on mine.

Yeah, I updated to the hourly build too. Maybe it got fixed with the latest hourly as I just A9LH'd this N3DS XL last night. Either way, that's good to know for people who had issues.

 

[Meliodas2255]

Yes, it's because it was fixed in a later commit. some users however still have 6.6 stable release and if they have clock-L2 enable it won't work for them. Based on the limited information OP gave us. we can only assumed that OP still on the stable release and doesn't hurt to disable these features in an attempt to solve his issue.