Hacking Stuck with arm11.bin loading in the Internet Browser

[Danielmethow]

I've been trying to install arm9loaderhax. When I write http://2xrsa.3ds.guide and enter I get: "arm11.bin loading" I wated several times and nothing happened.
Idk what should i do. Please help me with this.
Old N3DS ver. 11.1.0-34E

 

[offpir]

Do you have all the correct files in the root of the SD card? (arm11.bin, arm9.bin, ...)

 

[windhazard]

It might be loaded but the screen simply doesn't show. You can blind install like this:
Wait a bit, press SELECT, wait another 5s and press any buttons. See if the console shuts down, then A9LH is installed. Or shut it down yourself, and hold SELECT at next boot to see if the Luma config screen loads.

 

[proflayton123]

You state you're on 11.1?.. that is your problem..

 

[Danielmethow]

Do you have all the correct files in the root of the SD card? (arm11.bin, arm9.bin, ...)

Yes, I have

--------------------- MERGED ---------------------------

No, it doesn't work. When i press select shows Browser menu

It might be loaded but the screen simply doesn't show. You can blind install like this:
Wait a bit, press SELECT, wait another 5s and press any buttons. See if the console shuts down, then A9LH is installed. Or shut it down yourself, and hold SELECT at next boot to see if the Luma config screen loads.

 

[Bu2d85]

Yes, I have

--------------------- MERGED ---------------------------

No, it doesn't work. When i press select shows Browser menu

As someone already pointed out, you said you are on 11.1. Did you complete the ctrnand transfer to 2.1 yet? That installer only works on 2.1 for the initial setup.

 

[Danielmethow]

Does that mean I can't install A9LH bc I have 11.1 ver.

You state you're on 11.1?.. that is your problem..

 

[Bu2d85]

Does that mean I can't install A9LH bc I have 11.1 ver.

Are you following the guide, or just making it up as you go along?

I'm not trying to sound rude but....

http://3ds.guide

You have to run decrypt9 first and complete the 2.1 ctrnand transfer.

 

[Danielmethow]

Ok, thanks, I think it would work then

Are you following the guide, or just making it up as you go along?

I'm not trying to sound rude but....

http://3ds.guide

You have to run decrypt9 first and complete the 2.1 ctrnand transfer.

 

[porrascesar]

To anyone with this problem like i used to: Check your arm11, arm9, safeA9LHinstaller.dat etc files to be correct in size. I had the same problem, finally realized my files were 0Kb big, turns out all other stuff used in the guide can be decompressed using WinRar but the Safe9LHInstaller file MUST be decompressed using 7zip or else it will corrupt the files, fixing that let me do it afterwards in my first try, after a loooong time trying before.

 

[MelonGx]

Does that mean I can't install A9LH bc I have 11.1 ver.

LMFAO directly installing A9LH on 11.1.
This is one of the most stupid human mistake on 3DS hacking.

 

[Dionicio3]

LMFAO directly installing A9LH on 11.1.
This is one of the most stupid human mistake on 3DS hacking.

Don't be rude dude. Noobs always make mistakes

 

[wolf_]

To anyone with this problem like i used to: Check your arm11, arm9, safeA9LHinstaller.dat etc files to be correct in size. I had the same problem, finally realized my files were 0Kb big, turns out all other stuff used in the guide can be decompressed using WinRar but the Safe9LHInstaller file MUST be decompressed using 7zip or else it will corrupt the files, fixing that let me do it afterwards in my first try, after a loooong time trying before.

That's not correct I decompressed safe9lhinstaller using WinRAR it worked great no problems at all

 

[pixelmasher]

LMFAO directly installing A9LH on 11.1.
This is one of the most stupid human mistake on 3DS hacking.

He was too hyped for SigHax.