Hacking RXTools Nightly to Luma 3DS?

Duckling

Sorry for being dumb ;(
OP
Member
Joined
Mar 17, 2016
Messages
489
Trophies
0
Age
26
XP
429
Country
Laos
I was wondering if it was possible to change my CFW to Luma 3DS without any complications. I was also wondering whether Luma 3DS had a similar boot GUI similar to Rxtools and whether I needed to update my sysNAND to the latest firmware because I heard that Luma had a special feature that allowed for it to work on the latest FW on sysNAND (I want it lower)

How would I transfer everything and stuff..

(Sorry if ^ sounds retarded but I'm a complete noob at CFW's)
 
Last edited by Duckling,

Logan Pockrus

Knawledge is key.
Member
Joined
Jan 1, 2016
Messages
1,338
Trophies
0
XP
1,062
Country
United States
I was wondering if it was possible to change my CFW to Luma 3DS without any complications. I was also wondering whether Luma 3DS had a similar boot GUI similar to Rxtools and whether I needed to update my sysNAND to the latest firmware because I heard that Luma had a special feature that allowed for it to work on the latest FW on sysNAND (I want it lower)

How would I transfer everything and stuff..

(Sorry if ^ sounds retarded but I'm a complete noob at CFW's)
If you need more detail, just ask. But, it's as simple as deleting all of the files used for rxTools, then following an installation guide for Luma3DS (like this one: https://github.com/AuroraWright/Luma3DS/wiki/Installation-and-Upgrade).
 
  • Like
Reactions: Duckling

Duckling

Sorry for being dumb ;(
OP
Member
Joined
Mar 17, 2016
Messages
489
Trophies
0
Age
26
XP
429
Country
Laos
If you need more detail, just ask. But, it's as simple as deleting all of the files used for rxTools, then following an installation guide for Luma3DS (like this one: https://github.com/AuroraWright/Luma3DS/wiki/Installation-and-Upgrade).
Alright, so if I don't have arm9 I don't need the blue files correct?

--------------------- MERGED ---------------------------

Since I have my NAND's seperated will I have to delete my non-original NAND?

-edit-
Thanks for your help!
 

Logan Pockrus

Knawledge is key.
Member
Joined
Jan 1, 2016
Messages
1,338
Trophies
0
XP
1,062
Country
United States
Alright, so if I don't have arm9 I don't need the blue files correct?

--------------------- MERGED ---------------------------

Since I have my NAND's seperated will I have to delete my non-original NAND?
Don't take my word for it, as I'm color blind (and I have difficulty with colors such as blue). But, as I assumed you were using A9LH, in regard to this question:
whether I needed to update my sysNAND to the latest firmware
If you don't have A9LH, DO. NOT. UPDATE. Just don't do it! Luma3DS supports the latest firmware only if you have A9LH installed!
Since I have my NAND's seperated will I have to delete my non-original NAND?
Assuming your "non-original NAND" is your emuNAND, no, you won't have to. But it's always good practice to make backups, just in case the unthinkable happens!
 

Duckling

Sorry for being dumb ;(
OP
Member
Joined
Mar 17, 2016
Messages
489
Trophies
0
Age
26
XP
429
Country
Laos
Don't take my word for it, as I'm color blind (and I have difficulty with colors such as blue). But, as I assumed you were using A9LH, in regard to this question:

If you don't have A9LH, DO. NOT. UPDATE. Just don't do it! Luma3DS supports the latest firmware only if you have A9LH installed!

Assuming your "non-original NAND" is your emuNAND, no, you won't have to. But it's always good practice to make backups, just in case the unthinkable happens!
No, I don't have A9LH (I believe) and luckily I don't want to update my sysNAND past 9.2 so I really don't need it (I believe). I'll make a backup of my SD Card to prevent the unthinkable!

-edit-
I guess I'll start! I'll send a message on this thread in case anything happens! Thanks!

-edit-
I can use Luma without A9LH correct?
 
Last edited by Duckling,

Logan Pockrus

Knawledge is key.
Member
Joined
Jan 1, 2016
Messages
1,338
Trophies
0
XP
1,062
Country
United States
No, I don't have A9LH (I believe) and luckily I don't want to update my sysNAND past 9.2 so I really don't need it (I believe). I'll make a backup of my SD Card to prevent the unthinkable!
To clarify, you need a tool such as Decrypt9 (https://github.com/d0k3/Decrypt9WIP/releases) to backup something such as emuNAND, as it's on a hidden partition that is inaccessible to you.
I can use Luma without A9LH correct?
Indeed. But, I recommend you get A9LH, because it's the way of the future as far as 3ds hacks go. Here's the guide: https://github.com/Plailect/Guide/wiki/Part-1-(Homebrew)
 

Duckling

Sorry for being dumb ;(
OP
Member
Joined
Mar 17, 2016
Messages
489
Trophies
0
Age
26
XP
429
Country
Laos
To clarify, you need a tool such as Decrypt9 (https://github.com/d0k3/Decrypt9WIP/releases) to backup something such as emuNAND, as it's on a hidden partition that is inaccessible to you.
Would you recommend backing up the SD Card for any case?
Indeed. But, I recommend you get A9LH, because it's the way of the future as far as 3ds hacks go. Here's the guide: https://github.com/Plailect/Guide/wiki/Part-1-(Homebrew)
I heard that A9LH causes a lot of console bricks so I'm scared of going that route, but I think I'll do it. Do you recommend any youtube videos?
 

Duckling

Sorry for being dumb ;(
OP
Member
Joined
Mar 17, 2016
Messages
489
Trophies
0
Age
26
XP
429
Country
Laos
@Duckling You dont need to get A9LH to use luma, just get rid of the rxTools files and put the luma ones on your SD, no big sience behind it, same emunand + menuhax setup works with luma.
Alright, I'll try that. All I need to do is place the Luma Files on my sd card and boom! its done?
 

Tony_93

Well-Known Member
Member
Joined
Jun 13, 2015
Messages
2,457
Trophies
1
Location
California
XP
2,436
Country
United States
Alright, I'll try that. All I need to do is place the Luma Files on my sd card and boom! its done?

If you use a boot manager such as ctrbootmanager just create an entry for it on the config file and thats it, luma even brings its own boot.3dsx for menuhax use.

If you are scared you will noob fail at it backup the files to your PC.
 
  • Like
Reactions: Duckling

Duckling

Sorry for being dumb ;(
OP
Member
Joined
Mar 17, 2016
Messages
489
Trophies
0
Age
26
XP
429
Country
Laos
If you use a boot manager such as ctrbootmanager just create an entry for it on the config file and thats it, luma even brings its own boot.3dsx for menuhax use.

If you are scared you will noob fail at it backup the files to your PC.
Alright, you're the genus. and I will backup my files just in case (all 21 GB)
 

Tony_93

Well-Known Member
Member
Joined
Jun 13, 2015
Messages
2,457
Trophies
1
Location
California
XP
2,436
Country
United States
I used to use rxTools, moved onto reinand and today morning I finally jumped to luma.

Took no time to transfer CFW since they are only files you copy and move around.
 

Logan Pockrus

Knawledge is key.
Member
Joined
Jan 1, 2016
Messages
1,338
Trophies
0
XP
1,062
Country
United States
Would you recommend backing up the SD Card for any case?
If you feel so inclined, then why not?
I heard that A9LH causes a lot of console bricks so I'm scared of going that route, but I think I'll do it. Do you recommend any youtube videos?
Not anymore, unless it's by user error. Plus, youtube videos become outdated quickly. The guide is revised constantly, and videos simply aren't.

Oh yeah, uh...*ahem*:
Alright, I'll try that. All I need to do is place the Luma Files on my sd card and boom! its done?
If you need more detail, just ask. But, it's as simple as deleting all of the files used for rxTools, then following an installation guide for Luma3DS (like this one: https://github.com/AuroraWright/Luma3DS/wiki/Installation-and-Upgrade).
 

Duckling

Sorry for being dumb ;(
OP
Member
Joined
Mar 17, 2016
Messages
489
Trophies
0
Age
26
XP
429
Country
Laos
LOL no, back up all the CFW files except "Nintendo 3DS" folder, games installed have nothing to do with CFW files moved around, thats wasting time tbh
I want to thank whoever made you. You saved me 39 hours! My hero <3

-edit-
Now that i'm done backing up my stuff I'll try it out! and i'll change the boot conifg
 
Last edited by Duckling,

Logan Pockrus

Knawledge is key.
Member
Joined
Jan 1, 2016
Messages
1,338
Trophies
0
XP
1,062
Country
United States
I want to thank whoever made you. You saved me 39 hours! My hero <3
Christ, here I am assuming you're in the same situation as me, with a standard four gigabyte SD card that comes with the system! Sorry, hopefully I wouldn't have literally forced you to waste a day and fifteen hours! That's an unthinkable wait time!
 
  • Like
Reactions: Duckling

Duckling

Sorry for being dumb ;(
OP
Member
Joined
Mar 17, 2016
Messages
489
Trophies
0
Age
26
XP
429
Country
Laos
Christ, here I am assuming you're in the same situation as me, with a standard four gigabyte SD card that comes with the system! Sorry, hopefully I wouldn't have literally forced you to waste a day and fifteen hours! That's an unthinkable wait time!
Lol it's fine, it was probably just transfering small files @ like 10 kb/second.

Anyways, the github page talks about there being a Luma folder but I can't seem to find it in the original github post. Do I have to compile it?

-edit-
nvm I found i. Should I download the most recent version? 5.5?
 
Last edited by Duckling,

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    BigOnYa @ BigOnYa: I feel like I spent the night with Ancientboi +1