Hacking 3DS NOOB PARADISE - Ask questions here

[Onepunchbruh]

I don'nt get any of this. someone please help!


Put Decrypt9.nds from the Decrypt9 zip on your DS flashcard
Start your DS flashcard from your 3DS
Go to SysNAND File Options, then select the Dump Health & Safety option to dump Health & Safety to hs.app
Press Select to eject your SD card, then put it in your computer
Extract Universal Inject Generater, then copy both hs.app from your SD card and FBI.cia from the FBI zip to the input folder
Double click go.bat
Copy FBI_inject_with_banner.app to the root of your SD card and reinsert your SD card into your 3DS
Press B on Decrypt9, then go to SysNAND File Options and select the Inject Health & Safety option
Press down once to select FBI_inject_with_banner.app, then press A to inject
Go back to the EmuNAND file options menu in Decrypt9 (If you have one)
Backup EmuNAND to emuNAND.bin (If you have one)
Go to the SysNAND file options menu on the main menu
Backup SysNAND to sysNAND.bin
Press Select on the main menu to eject your SD card
Put your SD card in your computer, then rename sysNAND.bin and emuNAND.bin (If you have one) to sysNAND-OLD.bin and emuNAND-OLD.bin (If you have one)
Copy over sysNAND-OLD.bin and emuNAND-OLD.bin (If you have one) to a safe folder on your computer in case you ever want to revert to this version
Delete sysNAND-OLD.bin and emuNAND-OLD.bin (If you have one) from your SD card
Reinsert your SD card into your 3DS, then press Start to restart your 3DS
Put rxinstaller.nds from the mset folder in RxTools-3.0-beta_2.zip on your DS flashcard
Start your DS flashcard from your 3DS
Select the correct option for your system version
4.X.X -> "4.x rxTools"
6.X.X -> "6.x rxTools"
Go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" then hold L while it boots rxTools
Go to the right until you get to "Advanced Options"
Select either "Devmode"
Your 3DS will reboot back into the home menu
Launch the Health and Safety Application (which is now FBI)
Navigate to sysUpdater.cia and press A to install
Press the home button to go to the home menu, then open the sysUpdater application and press the A button to install
You can now follow the rest of this guide from Part 3 here

 

[Nickm23]

Plailect's A9LH guide, has a pretty good section for this, with what you would need to do on whatever version you are on and whatever browser you have.
Link: https://github.com/Plailect/Guide/wiki/9.2.0-Update

My english isnt the best, could you tell me which part i have to follow?

I really dont wanna mess it up because i saw it wrong haha

Thanks!

 

[Temptress Cerise]

My english isnt the best, could you tell me which part i have to follow?

I really dont wanna mess it up because i saw it wrong haha

Thanks!

https://github.com/Plailect/Guide/wiki/9.2.0-Update-(rxTools-2.5.2)

Assming you are truly on "6.2.0-12E." Like you wrote in your previous message.

Good luck~

 

[LuigiXL]

I have a 3ds with a very broken cart slot on 10.7.0-32.. Is any kind of HBL possible without a cart? Thanks

 

[Temptress Cerise]

I have a 3ds with a very broken cart slot on 10.7.0-32.. Is any kind of HBL possible without a cart? Thanks

Nope. Sorry to break it to you, but you'll need to get it fixed. My cart slot crapped out on me on my 25 Anniv. o3DS, glad I got A9LH setup before that happened.

 

[Nickm23]

https://github.com/Plailect/Guide/wiki/9.2.0-Update-(rxTools-2.5.2)

Assming you are truly on "6.2.0-12E." Like you wrote in your previous message.

Good luck~

Thanks lot for the help, appreciate it!

 

[skochko]

I acquired an o3DS with sysNAND 10.7. It already had A9LH and Luma3DS 5.4 set up, but not EmuNAND. I followed this guide...

https://gbatemp.net/threads/tutoria...luding-emunand-coldboot-cia-installer.405589/

... to set up EmuNAND on a new SD card and got to the part "Installing MenuHax, CFW and CtrBootManager". I figured I need CtrBootManager to actually boot to EmuNAND, but on its thread it says that it requires firmware <= 9.2. Do I need to downgrade to 9.2 and do the whole process of setting up CFW and everything else, or is there some alternative method available just to boot to EmuNAND?

I have FBI installed in place of Health & Safety app (this is my assumption, since it stuck around after a SysNAND format in Tinyformat). I can access Homebrew Manager from the main menu and also EmuNAND9 and Decrypt9WIP through Luma payloads, if that matters at all.

I've been searching for an answer for days and couldn't seem to find someone in a similar situation. 3DS' hacking scene is very new to me, so I'm asking for help. Thanks!

 

[Temptress Cerise]

I acquired an o3DS with sysNAND 10.7. It already had A9LH and Luma3DS 5.4 set up, but not EmuNAND. I followed this guide...

https://gbatemp.net/threads/tutoria...luding-emunand-coldboot-cia-installer.405589/

... to set up EmuNAND on a new SD card and got to the part "Installing MenuHax, CFW and CtrBootManager". I figured I need CtrBootManager to actually boot to EmuNAND, but on its thread it says that it requires firmware <= 9.2. Do I need to downgrade to 9.2 and do the whole process of setting up CFW and everything else, or is there some alternative method available just to boot to EmuNAND?

I have FBI installed in place of Health & Safety app (this is my assumption, since it stuck around after a SysNAND format in Tinyformat). I can access Homebrew Manager from the main menu and also EmuNAND9 and Decrypt9WIP through Luma payloads, if that matters at all.

I've been searching for an answer for days and couldn't seem to find someone in a similar situation. 3DS' hacking scene is very new to me, so I'm asking for help. Thanks!

If it has A9LH installed already, then that's all you need. If you must have an EmuNAND because you want one, then use EmuNAND9 to set one up, then change the settings in Luma3DS for it to autoboot your EmuNAND//RedNAND.

 

[sleepymanakete]

Hi!I plan on getting A9LH and I need something confirmed, please.
Do I need to remove the 3DS battery to turn on wifi or is it ok for me to turn it on in system settings?

 

[Temptress Cerise]

Hi!I plan on getting A9LH and I need something confirmed, please.
Do I need to remove the 3DS battery to turn on wifi or is it ok for me to turn it on in system settings?

Just make sure it's on and set up, and you won't have to remove the 3DS Battery to turn it on. That's only for people who forget to turn it on.

 

[sleepymanakete]

Just make sure it's on and set up, and you won't have to remove the 3DS Battery to turn it on. That's only for people who forget to turn it on.

Thank you!

 

[skochko]

If it has A9LH installed already, then that's all you need. If you must have an EmuNAND because you want one, then use EmuNAND9 to set one up, then change the settings in Luma3DS for it to autoboot your EmuNAND//RedNAND.

Awesome. Thanks a lot for such a quick reply!

 

[Mister_Keevs]

Hmmm, everything looks fine. I'd hate to recommend this, but could you try v0.87 of OTPHelper.
Link: https://github.com/d0k3/OTPHelper/releases/

Alright, so v0.87 boots fine after a few seconds. Guess imma use that instead of the newest

 

[Temptress Cerise]

Alright, so v0.87 boots fine after a few seconds. Guess imma use that instead of the newest

Yup, seems to be an issue with v0.88. Would you mind posting the details of your system and stuff on the OTPHelper thread? Hopefully it helps d0k3.
Someone also had a similar sounding issue like yours, it's the last reply on the OTPHelper thread.

Link: http://gbatemp.net/threads/release-otphelper-otp-dumping-downgrade-helper.416996

 

[Mister_Keevs]

Yup, seems to be an issue with v0.88. Would you mind posting the details of your system and stuff on the OTPHelper thread? Hopefully it helps d0k3.
Someone also had a similar sounding issue like yours, it's the last reply on the OTPHelper thread.

Link: http://gbatemp.net/threads/release-otphelper-otp-dumping-downgrade-helper.416996

Sure thing, I'll do it after I wrap up the al9h process. Thanks for your help!

 

[guiacm]

Hello! My 3ds is on 10.3.0-22E. Can I hack it?

 

[Nickm23]

im on step 19: Open OTPHelper (this can take a few tries in some situations) (https://github.com/Plailect/Guide/wiki/Part-4-(2.1.0-Downgrade)

Ive opened it 55 times now and it just boots to red lower screen and then black.

any ideas?

 

[Temptress Cerise]

Hello! My 3ds is on 10.3.0-22E. Can I hack it?

Yes. Use Plailect's Guide.
Link: https://github.com/Plailect/Guide/wiki
Do a system format prior though, to avoid the issue described here:
Link: https://github.com/Plailect/PlaiSysUpdater/issues/8#issuecomment-218588857

im on step 19: Open OTPHelper (this can take a few tries in some situations) (https://github.com/Plailect/Guide/wiki/Part-4-(2.1.0-Downgrade)

Ive opened it 55 times now and it just boots to red lower screen and then black.

any ideas?

You might be having the issue I just helped another poster on here with. Try the previous release of OTPHelper. v0.87.
You can post the issue on the OTPHelper to help d0k3 troubleshoot it.
Link: http://gbatemp.net/threads/release-otphelper-otp-dumping-downgrade-helper.416996/

 

[Nickm23]

Yes. Use Plailect's Guide.
Link: https://github.com/Plailect/Guide/wiki
Do a system format prior though, to avoid the issue described here:
Link: https://github.com/Plailect/PlaiSysUpdater/issues/8#issuecomment-218588857

You might be having the issue I just helped another poster on here with. Try the previous release of OTPHelper. v0.87.
You can post the issue on the OTPHelper to help d0k3 troubleshoot it.
Link: http://gbatemp.net/threads/release-otphelper-otp-dumping-downgrade-helper.416996/

that worked!

Thanks once again

 

[guiacm]

Yes. Use Plailect's Guide.
Link: https://github.com/Plailect/Guide/wiki

I'm trying but the message to update the console in the browser keeps showing up with the modified date and time.