Hacking Well.. Another a9lh problem here.

[OnenZ]

This is my story. I had my set up on a Old3ds Xl, with RxTool and cooldboot. I want to update luma, and do it already, but with 1 issue, i need a firmware.bin to run it without issue, well, i search for hour, and it's a problem with the ctrnand. (Actually i have and espiece of mix with a9lh with luma or something..)

Search and search and the results is to install the correct native_firm. Buuuut, my native_firm its the good one, 9.2 = 2.46-0 (Check it with Downgrade-check) and i say. Well... Bcs i dont know what it happens, i'll go for a9lh and just fine.

it's okay, i use the spanish guide for a9lh, all steps good but there's a problem. When i go to start my 3ds, appears the nintendo logo (I put this image) all good, but 3 sec later, i got a black screen. And i think, "Ok, think it's the menuhax" i press the button to desactivate and boot correctly, BUT on sysnand without my fbi on H&S.

So i think it's good to restore the 9.2 original sys and its patch the firm1 and 0 to again correctly. On this sysnand, i start all again, get the homebrew launcher and i go to decrypt9 but i can't launch, well, it launch but 2 seconds later got a red lower screen and boot to the hb again. And if i go to the hbl at the start of the boot, literally a black screen again. So i go to downgrade-check and this its say. "unfortunately you did not seem to downgrade to 9.2 properly. Installed native_firm: 2.50-1. 9-2 native_firm: 2.46-0" and i'm stuck in this loop. I can't boot normally luma, a9lh and hb apps. But i can boot on sysnand (With a9lh patch i suppose, those of Firm1 and 0)

So please, any tips to recover this... whatever it is this. I have my Sys/EmuNAND backup. But i'm scared to do hardmode (I'm not good with the tool xD)
And yes. SO SORRY FOR MY GRAMMAR. I'm spanish speaker and it's difficult to express myself good in other language.

EDIT: OKAY I GOT THE WAY TO BOOT DECRYPT9. (Whas with L & R xDDD so stupid thing)
So now i'm going to restore my sysnand with no a9lh and do all again i think.

Edit2: Well, the restore are good, the 3ds boot w/o SD card. ^^

 

[Deleted member 386348]

This might help for your frankenfirm - https://gbatemp.net/threads/guide-r...mware-w-o-upgrading-to-10-3-or-higher.413368/

 

[OnenZ]

This might help for your frankenfirm - https://gbatemp.net/threads/guide-r...mware-w-o-upgrading-to-10-3-or-higher.413368/

Well, i cant do it. When i try to open minipasta apears the same red flashy screen 2 times and returns me to hbl.
And if i go irectly to install de sysupdater i cant for one error of sumary level.

^This with OoT3D

And if i do with the ctrboot, when i'm go to launch MiniPasta it's simply a black screen all the time. (Yes i read to try some times, i do it 8 times.)

I don't think it's a Frankenfirm, it never happens to me.. But now xDD

 

[sweatbox]

Hi OnenZ,

not sure if i get your problem, so i will sum it up:
- Reinstalled an 9.2.0 non a9lh Nandbackup
- now you cant get into decrypt9 through the hbl
if so - try again. on my first 9.2.0 emunand9 call it took me 21 tries. -.-' maybe its with decryt the same.

or are you still with a9lh?
If you are still under a9lh with luma you can boot directly into decrypt9 (if you have sd:/luma/payload/start_d9.bin ) by holding start and power on your 3ds.

 

[OnenZ]

Hi OnenZ,

not sure if i get your problem, so i will sum it up:
- Reinstalled an 9.2.0 non a9lh Nandbackup
- now you cant get into decrypt9 through the hbl
if so - try again. on my first 9.2.0 emunand9 call it took me 21 tries. -.-' maybe its with decryt the same.

or are you still with a9lh?
If you are still under a9lh with luma you can boot directly into decrypt9 (if you have sd:/luma/payload/start_d9.bin ) by holding start and power on your 3ds.

I think i'm stuck o a9lh, i do all steps good, whit no fails but on the supose first boot with luma it doesn't start.

The thing is, i have the root with 1 luma folder, 1 Rei folder ( i think the 3.4 for 1 try to solution) and the necessaries files to run a9lh.
Yes, i have that name on decryp9.bin, but boot 1 time, and then for second time boot again (i think bcs the screen light up 2 times) and if i keep press start+power directly enter on ctrboot manager.

I can't reinstall any bcs if i go to hbl (with oot3d, browser or ctrboot manager) appears a red screen below (Touch screen) and boot again to the hbl. Think its a loop or something.

 

[sweatbox]

ok if you have still a9lh and luma stuck with black screen try a little thing, that I have done wrong.
Delete the sd:/luma/firmware.bin and download the right one for your system.

I had the N3DS version in my O3DS system and got blackscreen. Took me 3 hours.

If its not the solution try a new SD-Card and redownloading all files from Plailect Part5.
Try that SD-Card.
If it boots great - your problem seems to be on your previous sd.
If it doesnt boot - your problem seems to be analyzed in more detail.

 

[OnenZ]

ok if you have still a9lh and luma stuck with black screen try a little thing, that I have done wrong.
Delete the sd:/luma/firmware.bin and download the right one for your system.

I had the N3DS version in my O3DS system and got blackscreen. Took me 3 hours.

If its not the solution try a new SD-Card and redownloading all files from Plailect Part5.
Try that SD-Card.
If it boots great - your problem seems to be on your previous sd.
If it doesnt boot - your problem seems to be analyzed in more detail.

Thanks for the help mate, but now i have all controlled. I can restore my SysNand w/o a9lh ^^

 

[sweatbox]

great. can you maybe tell me what you have done?

 

[OnenZ]

great. can you maybe tell me what you have done?

Well, i only press L & R on the startboot (Power and rapid press it) and.. Abra kadabra. Decrypt9 it's working for art of magic.

And pls. Close the threat. I get a9lh just a moment a go. Thanks for helping ^^