Hardware The CLK has any effect in the screen?

[yacepi15]

Doing a hardmod i found a problem: theorically,the CLK and the CMD are shortcircuited and i have an fucking "BootRom 8046 00F800FE 00000 00000 00400" message. I read in the past that if the CLK doesnt work properly,the screen will not power on. Its that true? Thanks.

 

[milerwan]

What do you mean by short circuited ?
When you turn on your console, Blue screen appears immediately or after 2 seconds ?

Do you have picture of your motherboard with CLK and CMD points welded ?

 

[leerz]

that I have never experienced before,
but one time, my soldering on the 4 points was weak (lazy), the screen is black (n3ds), I'm hitting only 2mb/s @ R/W - but it worked out just fine.

 

[milerwan]

So what's the matter ?!?

 

[yacepi15]

What do you mean by short circuited ?
When you turn on your console, Blue screen appears immediately or after 2 seconds ?

Do you have picture of your motherboard with CLK and CMD points welded ?

2 seconds. If i put energy (A very low quantity,of course),in the CLK pin,it appears on the CMD one. There isnt soldering material between them,only this:

(Yes,i know the testpoints are in very bad state,but anything else theorically works)

 

[The Real Jdbye]

2 seconds. If i put energy (A very low quantity,of course),in the CLK pin,it appears on the CMD one. There isnt soldering material between them,only this:

(Yes,i know the testpoints are in very bad state,but anything else theorically works)

The picture is kind of blurry so it's hard to tell, can you take a better one?

 

[yacepi15]

The picture is kind of blurry so it's hard to tell, can you take a better one?

Of course. Please wait a moment... I will edit this message.

 

[leerz]

2 seconds then off without the bluescreen=tear in lcd ribbon

 

[milerwan]

The motherboard is dead.
Nothing to do now.

 

[yacepi15]

2 seconds then off without the bluescreen=tear in lcd ribbon

Two seconds and bluescreen. Not shutdown.

 

[milerwan]

Two seconds and bluescreen. Not shutdown.

= The motherboard is dead.
Nothing to do now.

 

[yacepi15]

= The motherboard is dead.
Nothing to do now.

Why? Can you explain?

 

[milerwan]

When the CMD or CLK dots are torn on 3DS, NAND is no longer detectable.
Only DAT0 can be torn without incidence.

For hardmod, only DAT0 point can be fixed by soldering on 101 component.

 

[yacepi15]

When the CMD or CLK dots are torn on 3DS, NAND is no longer detectable.
Only DAT0 point can be repaired (by soldering on 101 component).

It arent broken. The electricity passes to the connectors. The problem is that the connectors are shortcircuited (I dont know if that is the word in english),im trying to say that the connectors are joined by something (probably that copper layer).

 

[milerwan]

Again, the motherboard is dead, completely out of order, nothing to do to repair.

 

[yacepi15]

It arent broken. The electricity passes to the connectors. The problem is that the connectors are shortcircuited (I dont know if that is the word in english),im trying to say that the connectors are joined by something (probably that copper layer).

Anyone else can confirm it?

 

[yacepi15]

The thing i think is cutting the connections to the connectors and bridging them to their respective places. The only 2 problems are:

1. There is any point for bridging CMD/CLK?
2. How can i do after for writing the NAND?

Also,the problem arent the testpads directly,the problem is an shortcircuit. I dont know,but if i put electricity in for example,the CLK,it appears on the CMD. What can be the troll point? Thanks...