Just wanted to share some testing results of this great boot manager. I tested on old 9.2 USA and a new 9.0 USA. I tested with both b02 and b05 on both consoles. The themehax version I am using is stevice's build of no L button autoboot.
Old 3ds 9.2 USA - for rxtools and hb menu
1) Using b02 & b05 - Both boot to the menu every 4 power off cycles. On the times it doesn't work it stays stuck on that vertical striped static top screen.
2) Using b02 & b05 - If I load to sysnand first and then do the power button and home, it boots to the manager screen 100% of time.
3) Using boot.3dsx from rxtools thread - it boots 100% to the rxtools menu
New 3ds 9.0 USA - for reinand and hb menu
1) Using b02 & b05 - Both boots 100% of the time to the manager screen.
For the old 3ds the boot rate is alot lower than on the new 3ds from my testing. Does anyone else experience this? Maybe I will test the themehax that is not modified and use the L button to see if it works better on the old 3ds.
If you use autoboot themehax and press start then it skip the hax and so booting ctrBootManager... I think i read reinand works with ctrBootManager, but i'll try to test soon.Hey guys,
I'm kinda new to CFWs, I tried to boot Reinand using themehax and ctrbootmanager, but when I press start, it loads sysNAND without sig patches or anything, just the normal sysNAND. I guess that is because Reinand doesn't work with themehax for now. If there is any other way of booting into rei's emunand, please tell me.
If not, then I would like to try CakesFW because that seems to work for most/all of you and has signature patches as well. I just don't know how to get all these files. If there are precompiled files, then I just wasn't able to find them, if not, then I'm asking how to compile them on Linux (I have Fedora installed).
Many thanks in advance.
Edit: I guess it's important to mention that I own a cartridge copy of OoT. Still, I would rather want to boot cfw by using themehax.
can this boot rxtools.dat? the old one like 2.6 or 3.0 alpha
ThanksI think i read reinand works with ctrBootManager, but i'll try to test soon.
... Well... xDIf you use autoboot themehax
Some games and homebrew stuff that I made doesn't work properly on NH2.1, also blargSNES.Excuse me, but why do you have to load this app with NH1.1b?... I guess not working because is made based-on and for NH2.x and related exploits! But, IDK if could be get compatible with NH1.1...
Smealum himself said on his twitter that NH1.x is dead actually for him, and should be too for anybody!
You mean it doesnt even show the red flashing screen ? Because if so it seems your problem is more on the themehax side ? For me b05 autoboot fine at a 100% success rate on o3ds 9.2 (tried 10 times in a row). To be clear when you see some debug output on the top screen and the red flashing bottom screen CtrBootManager is not even launched yet, it's the themehax exploit.
After reading what you said it has to be the themehax side. As it doesn't even get to the part where it loads the debug code on top or a red screen on bottom. It just hangs at that static screen you see at first boot. I should of knew this earlier but assumed the boot.3dsx file from this app may caused the hanging. But I will further the test later to see if the standard smea boot.3dsx hangs as well.
Off-topic: Which themehax are you using, the stevice build or the standard L trigger build? I also tested with the L trigger build in my reply later and it had the same symptoms. This was on both our old 3ds xl 9.2 USA consoles. Maybe I will try to re-install themehax but don't know if it will make a difference.
Can you add an option in the menu to launch sysNAND ?
There might be a few occasions where peeps want to edit something in sysNAND from the start.
Instead of going over the emuNAND route -> sysNAND.
This manager needs to become the scene standard when it comes to coldbooting things, I like it a lot!
// Boot menu configuration
boot_config =
{
// Default timeout in secondes
// If timeout = -1, disable autoboot
timeout = 0;
// if timeout = 0 (autoboot),
// hold this key to enter the menu
// keycode list : https://goo.gl/4XLDIL
recovery = 9; // L
// Default boot entry
default = 0;
// Boot menu entries (16 max)
entries =
(
{
title = "Reinand";
path = "/rxTools/sys/code.bin";
offset = "0x12000";
},
{
title = "Homebrew Menu";
path = "/boot_hb.3dsx";
},
{
title = "rxTools";
path = "/rxTools/sys/code.bin";
offset = "0x12000";
},
{
title = "CakesFW";
path = "/Cakes.dat";
offset = "0x12000";
},
);
};
Yes. Just latest comma sign... I had made same error before!(...)
Code:(...) { title = "CakesFW"; path = "/Cakes.dat"; offset = "0x12000"; },
Edit 5: ... I found my stupid mistake... xD
Anyone made a video of this in action?
There are too many advancements in this area, I completely lost track ... every CFW thread made its own solution for a autobot.
EDIT: Nevermind, just saw this:
Is it possible to remove this verbose text from the themehax at the beginning somehow?
Linked NANDs?My configuration is now trying to launch Reinand, but isn't successful every time. After I press start on REinand's splash screen, the system is starting themehax, and after that, the screens keep being black. Any ideas?
... err... what? xDLinked NANDs?
Actually you would just have to press a button at power up to skip homemenuhax and boot to sysnand ?
I'm not on 9.2, so you'll have to ask someone else, sorry. But you need UNlinked NANDs!... err... what? xD
Can you tell me how to do that? :3
... err... what? xD
Can you tell me how to do that? :3
Just formatting one of both (Sys or Emu, what you prefer) from "System Settings".I'm not on 9.2, so you'll have to ask someone else, sorry. But you need UNlinked NANDs!