- Joined
- Jan 14, 2012
- Messages
- 6,052
- Trophies
- 0
- Location
- Ideas factory :)
- Website
- ccabz.wordpress.com
- XP
- 3,123
- Country
Blinking means something is missing or wrong:Quick question:
I updated to the uNeek2o r93b4 from your pack from the version you had posted previously by just replacing and overwriting the existing files in the usb1:/sneek folder that previously worked and whenever I started ANYTHING with Neek2o from that point on I just got the drive light repeatedly blinking a short, long, and short flash with a black screen and had to power down to get out of it.
Any idea what that means?
Putting back a backup of my old /sneek folder works fine again.
you need to install the wiiflow loader hidden channel v2 on emunandyea, ive also followed this tutorial to the T. i got the sneek folder form the masterpiece jumbo pack, i made a 4.3 uneed di nand with modmii, no priiloader. i used grab device cert/cert.sys extractor/nandsnc to sync te emunand with my real nand....
launching wiiware works, launching with neek2o set works as well, but i get a black screen/blinking light when i exit after playing....using exit to neek2o = black screen/blinking light, and using the neek2o channel = black screen/blinking light. could i pease get some help, i just need ot know why it wont work to launch neek2o when i followed all steps...thanks!
Thanks for the tips, I already tried step 1 prior to the post, but definitely not step 2 and 3, I'll be giving these a try ASAP, unfortunately I don't have a recent NAND backup or setting.txt backup, but ModMii can make one for me I'll try that and see if it works. If it's a no go I'll replace the SM WAD if still no go then fudge it I'll rebuild a ModMii NAND instead and start fresh. Again thanks for the help since I was getting discouraged and frustrated.really hard to tell what is wrong here. blinking means something is missing during nand check.
i had exact same issue before and tried to do 3 things before giving up.
1.delete nandcfg.bin and dicfg.bin
2.replace title\00000001\00000002\data\setting.txt from backup
3.reinstall SM wad via showmiiwads or replace title\00000001\00000002 from backup
if no backup then you give up and build a new nand and copy your saves from old nand
P.S. I had to build a new nand
Tip: when things work well backup the nand and sneek folder for moments like this later since this is pretty common.
I'm using 92b12... wait a sec how come it's at 93 now? In the beginning it was 93beta+ then your last pack it was 92b12 now it's 93b13 wtf is going on lol.oh and if u use old sneek version try the latest one:
Sneek pack 93b13 with xneek v2.4 files: http://www.mediafire.com/download.php?5b42wjddav6psud
it's 92b13 (typo)Thanks for the tips, I already tried step 1 prior to the post, but definitely not step 2 and 3, I'll be giving these a try ASAP, unfortunately I don't have a recent NAND backup or setting.txt backup, but ModMii can make one for me I'll try that and see if it works. If it's a no go I'll replace the SM WAD if still no go then fudge it I'll rebuild a ModMii NAND instead and start fresh. Again thanks for the help since I was getting discouraged and frustrated.
I'm using 92b12... wait a sec how come it's at 93 now? In the beginning it was 93beta+ then your last pack it was 92b12 now it's 93b13 wtf is going on lol.
Tried step 2 & 3, it failed to launch. Went ahead and created a fresh new NAND with Modmii and extracted my cert.sys with Fix's app, installed a few problematic titles like Swords and Soldiers and Castlevania, sure enough all worked well again. I backed the NAND up this time lol. Thanks 4 your help Abz. Success feels goodreally hard to tell what is wrong here. blinking means something is missing during nand check.
i had exact same issue before and tried to do 3 things before giving up.
1.delete nandcfg.bin and dicfg.bin
2.replace title\00000001\00000002\data\setting.txt from backup
3.reinstall SM wad via showmiiwads or replace title\00000001\00000002 from backup
if no backup then you give up and build a new nand and copy your saves from old nand
P.S. I had to build a new nand
Tip: when things work well backup the nand and sneek folder for moments like this later since this is pretty common.
xneek v2.4... have I been away for that long lol I never even heard of it. Also since this is WiiFlow shouldn't we be using neek2o or am I just missunderstanding something here?oh and if u use old sneek version try the latest one:
Sneek pack 93b13 with xneek v2.4 files: http://www.mediafire.com/download.php?5b42wjddav6psud
xneek files are the DM(L) bin files in sneek folder or app files for the extracted mios folder, they are used in neek2oxneek v2.4... have I been away for that long lol I never even heard of it. Also since this is WiiFlow shouldn't we be using neek2o or am I just missunderstanding something here?