Hacking Can someone make an anti-bannerbrick Mario Party 9 WAD for me?

[grandosegood]

can anyone confirm if i can use this with usb loader gx?

 

[Brightspark]

What you need for this is mario party 9.dol,
1.you need wad channel from already posted in this thread, you want CrapV3.3b, and CustomizeMii 3.11.
2.you need to unblock game in crap, to do this edit BlockedGames.xml with notepad and save, then disconnect your internet.
3.create channel wad for mario party 9 with choosen forwarder (WARNING THIS WAD IS A WII BRICKER DON'T USE AS A WAD).
4.Now open CustomizeMii 3.11., load the wad created by crap, under options tab select extract DOL save file, now close app and delete that bad wad you created.
5. Now open CustomizeMii 3.11., and load the wad downloaded from this thread,next go to options tab and choose browse,next to new DOL, now add your extracted mario party 9.dol, and click create.
I tested and works fine with wiiflow of sd card ect.
if you wanna do same using usb loader ect, i'm sure it'll work the same.

heres my tested wiiflow copy if you just want SSQP01 game channel wad.

 

[LoisBozo]

I found this

Post automatically merged: Aug 16, 2023

I found this

 

[LordByronV]

What you need for this is mario party 9.dol,
1.you need wad channel from already posted in this thread, you want CrapV3.3b, and CustomizeMii 3.11.
2.you need to unblock game in crap, to do this edit BlockedGames.xml with notepad and save, then disconnect your internet.
3.create channel wad for mario party 9 with choosen forwarder (WARNING THIS WAD IS A WII BRICKER DON'T USE AS A WAD).
4.Now open CustomizeMii 3.11., load the wad created by crap, under options tab select extract DOL save file, now close app and delete that bad wad you created.
5. Now open CustomizeMii 3.11., and load the wad downloaded from this thread,next go to options tab and choose browse,next to new DOL, now add your extracted mario party 9.dol, and click create.
I tested and works fine with wiiflow of sd card ect.
if you wanna do same using usb loader ect, i'm sure it'll work the same.

heres my tested wiiflow copy if you just want SSQP01 game channel wad.

Sorry to revive this thread but I just wanted to confirm: you are 100% sure this works for Wii Flow and Mario party 9 with no bricking on a Wii console installed through a wad manager the same as any other wad? I would love to use it if so but scared to brick my recently setup Wii.

 

[XFlak]

The problem is with the banner, if a dif banner is used, there should be no issue. Make sure u have priiloader installed and/or check it on dolphin or something to be extra careful

 

[LordByronV]

Sorry to revive this thread but I just wanted to confirm: you are 100% sure this works for Wii Flow and Mario party 9 with no bricking on a Wii console installed through a wad manager the same as any other wad? I would love to use it if so but scared to brick my recently setup Wii.

@Brightspark, I tested this and it works on my wii but I realized its for the PAL version of the game. Would you be able to make one for the NTSC-U version somehow? Is that easy to do?

Post automatically merged: Dec 28, 2025

Sorry to revive this thread but I just wanted to confirm: you are 100% sure this works for Wii Flow and Mario party 9 with no bricking on a Wii console installed through a wad manager the same as any other wad? I would love to use it if so but scared to brick my recently setup Wii.

@Brightspark, I tested this and it works on my wii but I realized its for the PAL version of the game. Would you be able to make one for the NTSC-U version somehow? Is that easy to do?

Post automatically merged: Dec 28, 2025

Update: I was able to create a WiiFlow forwarder WAD for the NSTC-U (US) version of Mario Party 9 using WiiGSC by removing it from the list of blocked games and disconnecting internet. I then took the banner, icon, and animation files from the WAD provided by @Brightspark and put them into my newly created WAD. Tested and working on 4.3u for NTSC-U with no issues on loading, hover over, and game launch. Seems to be all good!

That said, use at your own risk!

 

[MothyMoss]

@Brightspark, I tested this and it works on my wii but I realized its for the PAL version of the game. Would you be able to make one for the NTSC-U version somehow? Is that easy to do?

Post automatically merged: Dec 28, 2025

@Brightspark, I tested this and it works on my wii but I realized its for the PAL version of the game. Would you be able to make one for the NTSC-U version somehow? Is that easy to do?

Post automatically merged: Dec 28, 2025

Update: I was able to create a WiiFlow forwarder WAD for the NSTC-U (US) version of Mario Party 9 using WiiGSC by removing it from the list of blocked games and disconnecting internet. I then took the banner, icon, and animation files from the WAD provided by @Brightspark and put them into my newly created WAD. Tested and working on 4.3u for NTSC-U with no issues on loading, hover over, and game launch. Seems to be all good!

That said, use at your own risk!

I was able to make this work with usb loader gx by duplicating and renaming the app to wiiflow, but I cannot wrap my head around it automatically setting itself to sd mode with this wad (other than using wiigsc, but that would probably brick my wii). Would it be possible to get a NTSC-U Mario Party 9 forwarder wad for usb loader gx that loads directly into sd card mode? (It's already enabled in usb loader gx itself - but when I load this wad it doesn't)

I even tried using WiiGSC to make a NTSC-U wad with USB Loader GX - SD and replaced all banner, icons and animations with @Brightspark 's file (from the non-bricker mario party 9 wad) and my wii just crashed immediately

 

[tanav_k]

I was able to make this work with usb loader gx by duplicating and renaming the app to wiiflow, but I cannot wrap my head around it automatically setting itself to sd mode with this wad (other than using wiigsc, but that would probably brick my wii). Would it be possible to get a NTSC-U Mario Party 9 forwarder wad for usb loader gx that loads directly into sd card mode? (It's already enabled in usb loader gx itself - but when I load this wad it doesn't)

I even tried using WiiGSC to make a NTSC-U wad with USB Loader GX - SD and replaced all banner, icons and animations with @Brightspark 's file (from the non-bricker mario party 9 wad) and my wii just crashed immediately

could you share the wad you made to work with usb loader gx? also if you don’t mind, what’s the sd card mode that you’re talking about here?

 

[MothyMoss]

could you share the wad you made to work with usb loader gx? also if you don’t mind, what’s the sd card mode that you’re talking about here?

Sorry for the late reply, I don't actively use this. I used LordByronV's wad, and on my sd card renamed usb loader gx in /apps to "wiiflow".

For the SD card mode, I run my games off of an SD card, but naturally USB loader gx searches for usb's. Every time you open a game you have to press A to switch to sd card mode (only if the wad itself was made that way).

Nonetheless I was able to somehow replace the proper banner files in the wad and made it work, though it's been a bit so I forgot how I did it. Here's the wad of Mario Party 9 that works with USB Loader GX using an SD card, for the US version of the game:

If you're curious, this is what I remember doing:

- create new wad in wiigsc of mario party 9 (WiiGSC v1.1 ModMii Edition) with the mode set to usb loader gx (sd card)
- download his working wad with wiiflow
- replace the banner files of the new wad I made with the files from his wad
- it worked

I have no clue what I was doing before for it to not work but here it is