PS5 Exploit Guide

PS5 Hack Status:


FW Ranges:
2.XX = KEX+HV: PS4/5 backups, possible keys exploit (WK: 2.50 best / 2.7X max)
3.XX = KEX+HV+Linux: PS4/5 backups, possible keys exploit (WK/BD/LUA: 3.20 best / 3.21 max)
4.XX = KEX+HV+Linux: PS4/5 backups (WK/BD/LUA (Y2/NF/YARPE 4.03+): 4.50 best / 4.51 max)
5.XX = KEX+HV+Linux: PS4/5 backups (
WK/BD/Y2/NF/LUA/YARPE: 5.50 best + max)

6.XX = KEX: PS4/5 backups (KEX+HV+Linux: 6.02 max) (BD/Y2/NF/LUA/YARPE: 6.02 for Linux / 6.50 max)
7.XX = KEX: PS4/5 backups, no HV (
BD/Y2/NF/LUA/YARPE: 7.61 best + max)
8.XX-10.00 = KEX: PS4/5 backups, no HV (Y2/NF/LUA/YARPE)
10.01-12.70 = KEX: PS4/5 backups, no HV (
Y2/NF/LUA/YARPE)
13.XX = No KEX/UL only (Y2/LUA/YARPE)

NOTE 1: Recommended firmware is subjective. Staying low is always recommended.
NOTE 2: Do not update too many major versions (e.g., 4.xx to 5.xx or 7.xx to 8.xx). Remain low unless all you want is backups.
NOTE 3: Do not update past 12.00. P2JB can take over an hour to exploit on FW up to 12.70.


Hypervisor (HV):
Highest known HV exploit: 6.02
Highest theoretical HV exploit: 7.XX
Highest HV exploit: 1.00-4.51 (Cragson/Jordy) / 3.00-6.02 (TheFlow)
*unreleased/unimplemented

Kernel (KEX):
Highest public Release:
12.70
Highest known: 12.70 (P2JB)
UMTX2:
1.00-7.61 (*WK to 5.50 / BDJB to 7.61)
Lapse: 1.00-10.01
Poopsploit: 4.03-12.00
P2JB: 9.00-12.70 (*Use Lapse up to 10.01)

Userland (UL):
LUA (Artemis): 2.00-LATEST (LUA exploit, + Lapse up to 10.01)
Y2JB: 4.03-13.40 (YouTube exploit, + Lapse: 10.01 / P2JB: 12.70)
NFNH: 4.03-12.XX (Netflix exploit, + Lapse: 10.01)
YARPE: 4.03-12.XX (Ren'Py exploit, + Lapse: 10.01 / P2JB: 12.70)
BD-JB: 1.00-7.61 (Blu-Ray exploit + UMTX2, *8.00-13.20 via UN BD-JB + Poops to 12.00)
Webkit: 1.00-5.50 (PSFREE +UMTX2) (*up to 13.XX coming soon)
Mast1C0re: 1.00-7.61 (Depreciated for LuaC0re)
LuaC0re: 1.00-12.70 (Poops: 4.03-12.00/P2JB: 9.00-12.70)

NOTE 1: A userland entry point (UL) chained to kernel exploit (KEX) is required to exploit your console.
NOTE 2: Digital consoles can now use Y2JB+Poops (4.03-12.00) / Y2JB+P2JB (9.00-12.70).


Useful Applications:
Kstuff Lite: 3.00-12.70
HERE
Kstuff Toggle: 3.00-12.00 HERE
PS5 App Dumper: 3.00-12.00 HERE
Dump Runner: 3.00-12.00 HERE
Dump Installer: 3.00-12.00 HERE
Backporting: Possible (backpork / Porkfolio)
PS4/PS5 DLC: Work with Kstuff Lite
Trophies: Work with Kstuff Lite
Compression: Works with Kstuff Lite
Homebrew Enabler: etaHEN (3.00-10.01) latest HERE
PS5 Backup manager: ItemzFlow Compatibility list: HERE
PS4 Backup Loading: Works (rest mode & backports work, can crash).
PS5 Debug NG: 3.XX-13.XX
HERE
PS5 Remote Play: Works HERE & HERE
PS5 Trainers/Cheats: Work

UART:
HERE
Linux: (3.00-6.02) HERE
Kldload (wip): 3.00-6.50 HERE
Full chain exploit: 1.00-4.51 (byepervisor) HERE (also built into etaHEN up to 2.7X)
PSN access: NEVER
Latest OFW: 13.40 (02/06/26)
Summarised OFW/Model guide: HERE
1.XX-7.61 compatibility list:
HERE
PS5 SDK Repo: HERE
Legit PKG Updates: HERE or HERE
OFW Updates: HERE (history HERE)

Preparing Your Console:


It is recommended to either self-host offline or block these addresses in your router to avoid accidental updates or getting an update nag. Using the DNS method is no longer failsafe, as these are not guaranteed to be running 24/7.


dau01.ps5.update.playstation.net
dbr01.ps5.update.playstation.net
dcn01.ps5.update.playstation.net
deu01.ps5.update.playstation.net
dhk01.ps5.update.playstation.net
djp01.ps5.update.playstation.net
dkr01.ps5.update.playstation.net
dmx01.ps5.update.playstation.net
dru01.ps5.update.playstation.net
dsa01.ps5.update.playstation.net
dtw01.ps5.update.playstation.net
duk01.ps5.update.playstation.net
dus01.ps5.update.playstation.net
fau01.ps5.update.playstation.net
fbr01.ps5.update.playstation.net
fcn01.ps5.update.playstation.net
feu01.ps5.update.playstation.net
fhk01.ps5.update.playstation.net
fjp01.ps5.update.playstation.net
fkr01.ps5.update.playstation.net
fmx01.ps5.update.playstation.net
fru01.ps5.update.playstation.net
fsa01.ps5.update.playstation.net
ftw01.ps5.update.playstation.net
fuk01.ps5.update.playstation.net
fus01.ps5.update.playstation.net
hau01.ps5.update.playstation.net
hbr01.ps5.update.playstation.net
hcn01.ps5.update.playstation.net
heu01.ps5.update.playstation.net
hhk01.ps5.update.playstation.net
hjp01.ps5.update.playstation.net
hkr01.ps5.update.playstation.net
hmx01.ps5.update.playstation.net
hru01.ps5.update.playstation.net
hsa01.ps5.update.playstation.net
htw01.ps5.update.playstation.net
huk01.ps5.update.playstation.net
hus01.ps5.update.playstation.net
sgst.prod.dl.playstation.net
gs2.ww.prod.dl.playstation.net

Alternative DNS IP:
DNS 1: 172.245.146.114
(Leave DNS 2 blank)

To determine your OFW version:
Go to settings > system > console information.

Version string info:
Year.Half (1st/2nd half of the year)-Major Version No.Minor Version No.Extended info-Further Info.Retail/Debug

21.02-04.03.00.00-00.00.00.0.1

It is recommended to keep your console as low as possible to have access to better jailbreak stability and features. Stay as low as possible within the "Golden" firmware brackets that apply to your current firmware, see the top of this page.

(No jailbreak is ever guaranteed. No developer is obliged to release anything publicly)

WARNING:

Only update OFW manually via USB by getting the firmware file from HERE and installing from <USB>:/PS5/UPDATE/PS5UPDATE.PUP
(Updating with RECOVERY PUP will perform a factory format and will wipe your internal HDD)

KEY SYSTEM UPDATES:

12.70 SYS MD5: 707B15B07085500EB90205565751ECC3 (Exploited + KEX)
10.01 SYS MD5: 68A31944C1867BF9643798FD1C14998E (Exploited + KEX)
7.61 SYS MD5: D5ECA8B171A8D7DF7BA225167F77E645 (Exploited + KEX)
6.02 SYS MD5: 17b271DE081EB6EB25DBF70CB73EF9E8 (Exploited + KEX/HV/Linux)
5.50 SYS MD5: EDB3513EC531B2BD28F3A0B52A82A54F (Exploited + KEX/HV/Linux)
4.51 SYS MD5: 1330B7BF63BF5C93D809B1EB1F4E1F01 (Exploited + KEX/HV/Linux)
4.03 SYS MD5: 3716E4E6E0D223CD94CD4A8E5BD4FB94 (Exploited + KEX/HV/Linux)
3.20 SYS MD5: (F62F0D595D3F00C213D674D4DB2A7E44 (Exploited + KEX/HV/Linux)

PS5 factory mode PUP installation path:

/usb/PROSPERO/UPDATE/PROSPEROUPDATE.PUP

NOTE: Make a system back up before attempting any modifications.
On console: go to [Settings] > [System] > [System Software] > [Back Up and Restore] > [Back Up Your PS5]

Select Your Jailbreak:


WEBKIT:BD-JB:LUA:Y2JB:NFNH:YARPE:LuaC0re:BD-UN-JB:


  1. Information:
    Firmware 1.00-5.50 is required for webkit exploit.

    Enabling web browser:
    Open [Settings] > select [Users & Accounts] > select [YouTube] > click "Link" > click "use browser" > click "terms" (bottom right) > click google apps icon (top right) > select Google Search.

    Exploiting:
    Enter https://zecoxao.github.io/luasauce/ or https://github.com/kmeps4/PSFree into google > "Click Jailbreak" or wait for it to complete.

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  2. Important:
    You will need a BD dive paired to your Slim/Pro console or an OG Phat model . Consoles must be on 1.00-7.61 to run this exploit.


    Recommended ISO: Viktorious AIO Auto BD-JB ISO for 4.XX-7.61

    Exploiting:
    1, Burn ISO to a blank BD-R or BD-RE > Insert into console > click on the [DISC PLAYER] icon.

    2, Highlight [PIPELINE RUNNER] > click option 2 [Normaljailbreak-etaHEN-UMTX1.pipe] to auto load etaHEN ready for ItemzFlow.

    ELF Loader uses PS5 IP: port 9021 / BIN loader uses 9020 / Jar loader uses port 9025

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  3. Important:
    LUA entry point works from 2.00 to the latest OFW, but there is no KEX above 12.70 yet.
    (A compatible PS4 game is required to launch the exploit on PS5. See below)

    Your PS5 console must be activated to use save copying for PS4 games.
    1. Insert your game disc and, as soon as possible, make a save file within it.
    2. Copy the save files to USB, go to [SETTINGS] > [STORAGE] > [CONSOLE STORAGE] > [SAVE DATA] > [PS4 GAMES] > select the game save and copy to a USB drive.
    3. On PC, using a Google Drive account, make a new folder with the GAME ID of your game, and upload the savedata & savedata.bin files to that folder.
    4. Share the folder, set it to editor mode, share with anyone, and click "copy the link".
    5. Join the HTOS Discord group: HERE type "/decrypt", select "FALSE" for including SCE_SYS, paste or type in the Google Drive link, and press enter. The bot should begin mounting your save. (If it doesn't, paste in the link again.)
    6. Click "ENCRYPTED" to remove the Sony PFS layer. Download the generated files and extract the folder to your desktop (you should have 4 files in there and be named dec_savedata_CUSA[GAME ID]).
    7. Using REMOTE LUA LOADER, open the savedata folder, copy the 20 files within into your encrypted save folder on your desktop.
    8. Upload the encrypted save folder (now with 24 files in) to your Google Drive. It should be named "dec_savedata_CUSA[GAME ID]" where GAME ID is your games 5 digit number, and set it to editor mode, share with anyone, and then click "copy the link".
    9. Go back to the HTOS discord server, and type "/encrypt", hit "FALSE" for uploading individually, and "FALSE" to include SCE_SYS. Finally, hit shared_gd_link and paste in your link to the original save (4 files) folder. (If it doesn't, paste in the link again.)
    10. When this is done, paste the link to the decrypted save (24 files) folder, and the bot will encrypt the files.
    11. Resign the files by typing "/resign" followed by your account name on the console, or PSN ID associated with that account if using the latest OFW.
    12. Download the resigned files, extract the files to your USB drive and overwrite them into the savedata folder on your USB or external drive.
    13. Copy the saves back to your console [SETTINGS] > [SAVE DATA AND GAME/APP SETTINGS] > [SAVE DATA PS4] > [COPY OR DELETE FROM USB] > [COPY TO CONSOLE STORAGE] > select your game save folder from the USB drive and copy/overwrite old save data.
    14. Load LUA game again, and you should see the LUA LOADER screen.
    15. You can use "SEND_LUA.PY" to send the UMTX files to the loader.
    (NOTE: Some games require manual loading of save game)

    On firmware up to 7.61, you can now load UMTX/2 followed by etaHEN by sending the files to your console IP on PORT 9026.
    On firmware 8.00-LATEST, you can connect with the REMOTE LUA LOADER APP to send debug notifications or FTP on port 1337.

    LUA Loader: HERE or HERE

    Auto LUA Loader Fork: HERE

    Compatible LUA games:
    Aerial Life (CUSA17122)
    Aibeya (CUSA17068)
    Aikagi 2 (CUSA19556)
    Aikagi Kimi to Issho ni Pack (CUSA16229)
    Aikano Yukizora no Triangle (CUSA19370)
    Boku to Nurse no Kenshuu Nisshi (CUSA12049)
    Boku to Joi no Shinsatsu Nisshi (CUSA18107)
    Fuyu Kiss (CUSA29745)
    Hamidashi Creative (CUSA27389)
    Hamidashi Creative Demo (CUSA27390 requires the latest OFW to download from PSN)
    Haruoto Alice (CUSA14324)
    IxSHE Tell (CUSA17112)
    IxSHE Tell Demo (CUSA17126)
    Jinki Resurrection (CUSA25179)
    Jinki Resurrection Demo (CUSA25180 requires the latest OFW to download from PSN)
    Maid-san no Iru Kurashi (CUSA18106)
    Nora Princess and Stray Cat Heart HD (CUSA13303: Rename save9999.dat into nora_01.dat)
    Nora Princess and Strat Cat Heart 2 (CUSA13586)
    Raspberry Cube (CUSA16074)
    Winter Guest (CUSA11977)

    WARNING: using demos is free but can become corrupt, and you cannot upgrade your internal HDD either. If you lose the demo you can no longer use the exploit. Disc recommended.

    Incompatible LUA games:

    Dokyusei Remake Csver (CUSA47117)
    Dōkyūsei: Bangin' Summer - Home Edition Demo (CUSA47132)
    Kiss Trilogy (CUSA19341)
    Love Clear Demo (CUSA18109)
    Mikagami Sumika no Seifuku Katsudou (CUSA11481)
    Sen no Hatou, Arazone no Hime (CUSA09647)
    Tonari ni Kanojo no Iru Shiawase: Two Farce (CUSA09825)
    Tonari ni Kanojo no Iru Shiawase Summer Surprise (CUSA18998)

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  4. Requirements:
    PS5 console must be on 4.30-12.70 and previously activated through PSN or fake activated to use the YouTube app, unless you're restoring a backup.
    (Note: restoring a backup will factory reset your console).

    Information:
    If updating and older installation, download the latest download0.dat > use FTP or PS5 Explorer to place it in the user/download/PPSA01650 folder.

    Preparation:
    Download the Y2JB_backup_X.X(4.03) if you're on 4.03-12.40, or the Y2JB_backup_X.X(12.20) if you're on 12.60 or higher from HERE
    On PC: format a USB 3.0 HDD to exFAT, and copy the PS5 folder from the backup to the root, and put the latest nanodnf.efl from nanoDNS to the root too.
    On console: go to [Settings] > [System] > [System Software] > [Back up and Restore] > [Restore] > select the y2JB back up & let it install (the console will reboot when complete).
    (Note: The exploit will now be accessible under the [MEDIA] tab)

    Exploiting:
    Going to [Settings] > [Network] > [Settings] > [Set up Internet Connection] > [Set up Manually] > set up a wireless or LAN connection > change [DNS Settings] to manual > change [Primary DNS] to 127.0.0.1 > click [Done] > open the [YouTube App].
    (Note: Ignore and internet connection issue warnings)

    Firmware up to 10.01 will use Lapse Kernel Exploit. Firmware 10.20-12.70 and above will use P2JB and could take up to an hour.

    You can send payloads using netcat GUI to PS5's IP Address & port 9021.

    You can swap the download0.dat to itzPLK version for auto loading and payload manager in future (payload manager accessible through browser on 127.0.0.1:8084)

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  5. Requirements:
    PS5 console must be on 4.30-10.01 and previously activated through PSN or fake activated. You will need a 256GB external HDD (minimum).

    Preparation:
    Download balenaEtcher
    Download the latest Extended Storage or M.2 Image (select your m.2's capacity)

    EXTERNAL DRIVE METHOD (Netflix_PS5_EU_Ext.7z):
    1a, On PC: connect your 256GB (min) USB drive to your Windows/Mac/Linux PC > extract the image to your computer > open Etcher > click [Flash From File] & select the extracted image *.zip > click [Select Target] & choose the external drive > Click [Flash!] & allow it to complete.
    (Note: 256GB is the smallest drive you can use)

    2a, On console: click [Settings] > [Storage] > [USB Extended Storage] > [Games and Apps] > press X on [Netflix] > select [NETFLIX] under items to move > select [Move] > move to internal storage & allow it to complete.
    (Note: The exploit will now be accessible under the [MEDIA] tab)

    INTERNAL DRIVE METHOD (Netflix.XXXXGB.7z):
    1b, On PC: connect the M.2 to your Windows/Mac/Linux PC > extract the image to your computer > open Etcher > click [Flash From File] & select the extracted image *.zip > click [Select Target] & choose the external drive > Click [Flash!] & allow it to complete.
    (Note: 4TB will take 80 mins, 2TB 45 mins, 256GB 10 mins)

    2b, On console: Power off the console > insert the M.2 SSD > power on the console > click [Settings] > [Storage] > press X on [Netflix] > select [NETFLIX] under items to move > select [Move] > move to internal storage & allow it to complete.
    (Note: The exploit will now be accessible under the [MEDIA] tab).

    Exploiting:
    1a, for consoles 10.01 and below, on console: go to [Settings] > [Network] > [Settings] > [Set up Internet Connection] > [Set up Manually] > set up a wireless or LAN connection. Go to Proxy > change [Automatic] to [Manual] > enter Address: 172.105.156.37 & port: 42069 > click [Done] > open the [Netflix App].
    (Note: Ignore and internet connection issue warnings)

    1b, for consoles 10.20-12.70, COMING SOON.

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  6. Important:
    YARPE works from 4.30 to 12.70 (9.00 - 12.07 via P2JB)
    (A compatible PS4 game is required to launch the exploit on PS5. See below)

    Requirements:
    PS5 console must be on 4.30-10.01 to use this exploit.

    Exploiting:
    coming soon

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  7. Requirements:
    PS5 console must be on 4.30-12.70 to use this exploit. SWRR

    Exploiting:
    coming soon

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  8. Important:
    This method modifies the BD-J stack to allows BD-JB entry point to be re-enabled on consoles up to 13.40, for conveninece only.

    Very Important:
    This method requires your console to be jailbroken by another method first to gain access to alter the files.

    https://github.com/Gezine/BD-UN-JB

    Preparation:
    Burn the ISO to a blank Blu Ray, insert it into the jailbroken console. Send the bdj_unpatch.elf to elfldr using netcat GUI to PS5's IP Address & port 9021 to unpatch BD-J.

    (NOTE: DO NOT REINSTALL/UPDATE FW, IT WILL WIPE THE PATCH AND LOSE BD-JB)


Once jailbroken it is recommended to run KSTUFF LITE and SHADOWMOUNTPLUS at minimum to get you up and running.
(ShadowMountPlus: is an automated background auto-mounter payload for jailbroken PS5 consoles. Detects, mounts, and installs game dumps from internal or external storage, with support for UFS, exFAT, PFS, and nested compressed PFS containers)

Additional Information:


Blocking Updated with nanoDNS:
Set primary DNS manually to 127.0.0.1. Send latest elf to BIN LOADER using netcat GUI to PS5's IP Address & port 9021.

PS4 GAME INFORMATION:
OFW 1.xx cannot run PS4 games.
OFW 2.xx runs PS4 games up to 8.03

OFW 3.xx runs PS4 games up to 8.52
OFW 4.xx runs PS4 games up to 9.04
OFW 5.xx runs PS4 games up to 9.60
OFW 6.xx runs PS4 games up to 10.50

OFW 7.xx runs PS4 games up to 11.00
OFW 8.xx/9.xx runs PS4 games up to 11.50
OFW 10.xx runs PS4 games up to 12.00

OFW 11.xx runs PS4 games up to 12.50
OFW 12.xx runs PS4 games up to 13.00


(Note: PS4 backported FPKGs also work perfectly on an exploited PS5 with Kstuff)


You can install free/demo PKGS (legit pkgs) via the debug pkg installer, provided you have all the files/json/licences required.
(Astro’s Playroom has no licences and can be installed and played from official pkgs and updated inline with your firmware)

Warnings:


1: Never enable IDU mode.
If you do, you will need to enter staff mode by holding L1 + L2 and tapping this combo: circle, cross, square, triangle, right D-Pad. Release L1 + L2, and you can access settings to exit IDU.

2: Try to stay on the lowest FW possible and wait for hacks on that firmware.

3: PS5 FPKGs do not work. A hack for the A53 processor does not publicly exist to enable installing PS5 content as FPKG/PKG.

4: Installing legit game PKGs you do not own will never work, even if spoofed.

5: If you get stuck in a boot loop at the PS logo, the SNVS is corrupted (if the hash check fails on boot, this causes a “soft brick”). It’s not “bricked”. Simply reinstall your current firmware RECOVERY PUP in safe mode from USB: PS5 > UPDATE > PS5UPDATE.PUP.

Archived Information


 
Anyone whose wondering how to use the homebrew launcher, although I expect you all know anyway, i've made a post here..


Happy reading :)

You've mixed up a few things.

There's no need to run etaHEN at all. The whole point of the Hombrew Launcher is that you don't need to use etaHEN.

Once you have YTJB with Autoloader 0.3 up and running, all you need to do is load three things with it:

As for me - everything works fine on 09.60. As for now - 0KP. I KNOW it might be coincidence but still.

1. FTP Server (by John Tornblom) - https://github.com/ps5-payload-dev/ftpsrv/releases/tag/v0.14.3

5 sec wait

2. WEB Server (by John Tornblom) - https://github.com/ps5-payload-dev/websrv/releases/tag/v0.28.3

5 sec wait

3. KStuff (by EchoStretch) - https://github.com/EchoStretch/kstuff/releases/tag/v1.6.6

Ksuff should be loaded last because it can cause a KP - in fact, the Autoloader website has a special note about this:

“If you are loading multiple ELFs, it's probably best if etaHEN / kstuff is the last payload you load.”

Once you have loaded YTJB with Autoloader and these three payloads, you can use Debug Settings to install Homebrew Launcher (you need to download the normal PKG file and install it).

Now you need to prepare an external USB / USB-C drive. I use a 1TB Samsung ExFAT. Connect the prepared / formatted empty drive to your computer.

The first thing we do is prepare the kstuff-toggle payload for use. I use it to disable kstuff in PS4 games. So I start a PS4 game, minimize it, go to Homebrew Launcher, and there I see the kstuff-toggle payload. I click on it and thus disable kstuff.

When I finish playing, before exiting the game, I do exactly the same thing, but this time I turn on kstuff and then exit the game or put the console to sleep. To install kstuff, do the following.

On an external USB drive formatted for the ExFat file system, create a folder like this:

/homebrew/kstuff-toggle/

and place the files from here in it:

https://github.com/EchoStretch/kstuff-toggle/releases/tag/0.4

Depending on whether the payload is to enable/disable kstuff for PS4 only, PS5 only, or both, you need to place the appropriate files in the directory. Everything is described in the link I provided.

In the same directory, i.e.:

/homebrew/

place the PS5 titles you want to play, e.g.

/homebrew/PPSAXXXXX
/homebrew/PPSAXXXXX
/homebrew/PPSAXXXXX

and so on.

in EACH PPSAXXXXX you need to place two files from here:

https://github.com/EchoStretch/dump_runner/releases/tag/v0.04

Now, there are multiple versions of dump_runner.elf. The one I linked is the official one, but there is a better one from BestPig - available on the Echo Discord channel.

As I wrote earlier, it's better because the BestPig version of dump runner runs very fast, like instantly. The Echo version sometimes gave a black screen for 1-15 minutes, and after that the games ran. It also includes kstuff auto on/off.

====================================

That's it. Here's how it works:

1. Start the console.
2. Start YTJB.

From now on, the console is fully hacked and accessible via FTP.

3. If you want to play a PS4 title, launch it normally from the official PS5 dashboard, then minimize the game, go to Homebrew Launcher, click on kstuff-toogle to disable kstuff. When you finish the game (PS4), do the same but this time enable kstuff.

4. When you want to play a PS5 title, go directly to HomeBrew Launcher, where you will see (next to kstuff-toogle) the PPSAXXXXX titles that you previously uploaded to the disk.

The coolest thing is that when you play PS5 titles, kstuff turns itself off and on.

Very important. If you forget to exit the game and want to launch another PS5 title, an error will appear. In that case, simply exit the previously launched game and launch another one again.
 
@lotnybartek thank you for your feedback and detailed reply, it's all a learning curve that's for sure and that's the beauty of this scene/community. TBH I was not aware of the use of kstuff toggle as I was allowing etaHEN to pause and unpause it (first manually and then secondly automatically) it certainly makes sense for why it's needed for HBL. Talking of which, i was chatting to Bestpig on the pkg-zone discord channel and he mentioned that there was a WIP of his fork of the HBL which would be released in due course.

I'll also update my main post too with your updates as you have said some very useful insights :)
 
Last edited by BobaFett_UK,
  • Like
Reactions: KiiWii
Sent you a PM.

BestPig is cooking smth nice but as for now - what we have works well ;)
That sounds promising. I saw how fast Astro launced in the video he shared... whereas itemszflow takes it's time... talking of which GTA does not run with etaHEN 2.5b (well not for me it does not). It does run with echo's 1.08 HBL though..
 
  • Like
Reactions: schatzi24
Onto more important news, i'm getting 4 new tyres put on my car in a couple of hrs... if i had 4 of those Star Wars pod-racer games they could have paid for my tyres, but only just... :D
eventually you can install those reactors in your car, for sure they will give more milk than in the ps5... xdddddddddd
 
... and all that noise for a console where the 95% of the games are pure junk. To see to believe it.

I already downloaded the best games 🤣

Astro bot 2024
Uncharted 4
Ghost of sushi
Last of us 2
Granblue fantasy

I played none of them before so the jailbreak is little bit worth it for me
 
  • Like
Reactions: qamartheone
eventually you can install those reactors in your car, for sure they will give more milk than in the ps5... xdddddddddd
Well my 0 to 60 is like 3.7 secs so i figure that's fast enough :D
Was considering doing donuts around some roundabouts here but figured i'd probably get arrested :D
Post automatically merged:

I already downloaded the best games 🤣

Astro bot 2024
Uncharted 4
Ghost of sushi
Last of us 2
Granblue fantasy

I played none of them before so the jailbreak is little bit worth it for me
Fancy some sushi now :D
 
Well my 0 to 60 is like 3.7 secs so i figure that's fast enough :D
Was considering doing donuts around some roundabouts here but figured i'd probably get arrested :D
Post automatically merged:


Fancy some sushi now :D
Just because someone misspelled Ghost of Sashimi. :D
 
Last edited by Axido,
Well my 0 to 60 is like 3.7 secs so i figure that's fast enough :D
Was considering doing donuts around some roundabouts here but figured i'd probably get arrested :D
Post automatically merged:


Fancy some sushi now :D
What you driving to cost that in tyres?, pretty quick 0-60 too
 
  • Like
Reactions: BobaFett_UK
I already downloaded the best games 🤣

Astro bot 2024
Uncharted 4
Ghost of sushi
Last of us 2
Granblue fantasy

I played none of them before so the jailbreak is little bit worth it for me
Best games on ps5, the very few ones, all come from PS4, that proves all.
 
i made a thread here asking about POOPSPLOIT.
I watched this video about it:


if i understood correctly the star wars racer revenge mast1c0re exploit can be used to run POOPSPLOIT? or not?
I have Okage installed on my PS5, thats for mast1c0re, too right?
will Okage eventually be able to trigger POOPSPLOIT?
i havent been looking in on what the scene is doing for a long time and havent updated my PS5 either, could use some guidance.
 
You've mixed up a few things.

There's no need to run etaHEN at all. The whole point of the Hombrew Launcher is that you don't need to use etaHEN.

Once you have YTJB with Autoloader 0.3 up and running, all you need to do is load three things with it:

As for me - everything works fine on 09.60. As for now - 0KP. I KNOW it might be coincidence but still.

1. FTP Server (by John Tornblom) - https://github.com/ps5-payload-dev/ftpsrv/releases/tag/v0.14.3

5 sec wait

2. WEB Server (by John Tornblom) - https://github.com/ps5-payload-dev/websrv/releases/tag/v0.28.3

5 sec wait

3. KStuff (by EchoStretch) - https://github.com/EchoStretch/kstuff/releases/tag/v1.6.6

Ksuff should be loaded last because it can cause a KP - in fact, the Autoloader website has a special note about this:

“If you are loading multiple ELFs, it's probably best if etaHEN / kstuff is the last payload you load.”

Once you have loaded YTJB with Autoloader and these three payloads, you can use Debug Settings to install Homebrew Launcher (you need to download the normal PKG file and install it).

Now you need to prepare an external USB / USB-C drive. I use a 1TB Samsung ExFAT. Connect the prepared / formatted empty drive to your computer.

The first thing we do is prepare the kstuff-toggle payload for use. I use it to disable kstuff in PS4 games. So I start a PS4 game, minimize it, go to Homebrew Launcher, and there I see the kstuff-toggle payload. I click on it and thus disable kstuff.

When I finish playing, before exiting the game, I do exactly the same thing, but this time I turn on kstuff and then exit the game or put the console to sleep. To install kstuff, do the following.

On an external USB drive formatted for the ExFat file system, create a folder like this:

/homebrew/kstuff-toggle/

and place the files from here in it:

https://github.com/EchoStretch/kstuff-toggle/releases/tag/0.4

Depending on whether the payload is to enable/disable kstuff for PS4 only, PS5 only, or both, you need to place the appropriate files in the directory. Everything is described in the link I provided.

In the same directory, i.e.:

/homebrew/

place the PS5 titles you want to play, e.g.

/homebrew/PPSAXXXXX
/homebrew/PPSAXXXXX
/homebrew/PPSAXXXXX

and so on.

in EACH PPSAXXXXX you need to place two files from here:

https://github.com/EchoStretch/dump_runner/releases/tag/v0.04

Now, there are multiple versions of dump_runner.elf. The one I linked is the official one, but there is a better one from BestPig - available on the Echo Discord channel.

As I wrote earlier, it's better because the BestPig version of dump runner runs very fast, like instantly. The Echo version sometimes gave a black screen for 1-15 minutes, and after that the games ran. It also includes kstuff auto on/off.

====================================

That's it. Here's how it works:

1. Start the console.
2. Start YTJB.

From now on, the console is fully hacked and accessible via FTP.

3. If you want to play a PS4 title, launch it normally from the official PS5 dashboard, then minimize the game, go to Homebrew Launcher, click on kstuff-toogle to disable kstuff. When you finish the game (PS4), do the same but this time enable kstuff.

4. When you want to play a PS5 title, go directly to HomeBrew Launcher, where you will see (next to kstuff-toogle) the PPSAXXXXX titles that you previously uploaded to the disk.

The coolest thing is that when you play PS5 titles, kstuff turns itself off and on.

Very important. If you forget to exit the game and want to launch another PS5 title, an error will appear. In that case, simply exit the previously launched game and launch another one again.

Hello
Can you link the bestpig dump_runner.elf file please?
Cant find it at echo discord channels...
thanks
 
i made a thread here asking about POOPSPLOIT.
I watched this video about it:


if i understood correctly the star wars racer revenge mast1c0re exploit can be used to run POOPSPLOIT? or not?
I have Okage installed on my PS5, thats for mast1c0re, too right?
will Okage eventually be able to trigger POOPSPLOIT?
i havent been looking in on what the scene is doing for a long time and havent updated my PS5 either, could use some guidance.

I was told no about Okage being used for it. Making it another game causing money down the drain.

At this point buying the exploited discs and download games we could save money just upgrading and buying the three decent games that were made 2+ years ago.
 

Site & Scene News

Popular threads in this forum