Xenoblade Chronicles X cheats and mods

[retnuh730]

well some of us here already 100% the game many times in WiiU and it's to each to their own I guess .

No judgement, I was just asking what the experience of playing with this cheat from the beginning is like.

 

[seloselo]

No judgement, I was just asking what the experience of playing with this cheat from the beginning is like.

even with all the Arts Max Level early in the game it's still fun and all.
you can try it in another save slot and if you don't like it just use the other save that didn't have the cheat
most of the cool arts are locked in affinity quest

 

[spideyknight]

I calculated the FemaleID codes for the Chest Scale.

made by C_H_E_W I just did the calculations.​

Untested. Tell me if it works for you.

UPDATE02 Fixed mixed up IDs. Added AI
UPDATE01 Added Neilnail and Liesel.

Spoiler: Female Characters set to x5.0

[Elma Bust Scale x5.0]
580F0000 01DD0408
780F0000 0000590C
300E0000 00000003
640F0000 00000000 40A00000
780F0000 00000004
310E0000

[Lin Bust Scale x5.0]
580F0000 01DD0408
780F0000 00006104
300E0000 00000003
640F0000 00000000 40A00000
780F0000 00000004
310E0000

[Celica Bust Scale x5.0]
580F0000 01DD0408
780F0000 000068FC
300E0000 00000003
640F0000 00000000 40A00000
780F0000 00000004
310E0000

[Irina Bust Scale x5.0]
580F0000 01DD0408
780F0000 000070F4
300E0000 00000003
640F0000 00000000 40A00000
780F0000 00000004
310E0000

[Murderess Bust Scale x5.0]
580F0000 01DD0408
780F0000 000078EC
300E0000 00000003
640F0000 00000000 40A00000
780F0000 00000004
310E0000

[Alexa Bust Scale x5.0]
580F0000 01DD0408
780F0000 000080E4
300E0000 00000003
640F0000 00000000 40A00000
780F0000 00000004
310E0000

[Hope Bust Scale x5.0]
580F0000 01DD0408
780F0000 000088DC
300E0000 00000003
640F0000 00000000 40A00000
780F0000 00000004
310E0000

[Mia Bust Scale x5.0]
580F0000 01DD0408
780F0000 000090D4
300E0000 00000003
640F0000 00000000 40A00000
780F0000 00000004
310E0000

[Al Bust Scale x5.0]
580F0000 01DD0408
780F0000 000098CC
300E0000 00000003
640F0000 00000000 40A00000
780F0000 00000004
310E0000

[Neilnail Bust Scale x5.0]
580F0000 01DD0408
780F0000 0000A0C4
300E0000 00000003
640F0000 00000000 40A00000
780F0000 00000004
310E0000

[Liesel Bust Scale x5.0]
580F0000 01DD0408
780F0000 0000A8BC
300E0000 00000003
640F0000 00000000 40A00000
780F0000 00000004
310E0000

If you want to change the size alter the 40A00000.

Spoiler: Alt Sizes to try

3F000000 Small
3F400000
3F800000 Default
3FC00000
40000000
40400000
40800000
40A00000
40C00000 Large

Ryujinx just unzip the attached file into your mods folder. (Right-click game icon in Ryujinx>open mods folder)

I tried the different values, past the default, doesn't seem to be a difference between them. The Large at the end is the same size as 3FC00000.

[Elma Bust Scale x5.0] 580F0000 01DD0408 780F0000 0000590C 300E0000 00000003 640F0000 00000000 40A00000 780F0000 00000004 310E0000 [Elma Bust Scale x2.5] 580F0000 01DD0408 780F0000 0000590C 300E0000 00000003 640F0000 00000000 3FC00000 780F0000 00000004 310E0000

These give the same result

 

[YlwHrt]

I don’t know what to tell you but I’ve been playing at 60fps pretty easily since last week. Are you over clocking at all? Saying things like this is just wrong.

Here is me running at locked 60 at lower clocks than you at 720p res lol



EDIT:

Here's the game resolutions while I'm doing the same thing:

this is the result me and my friend who have og v1 switch's have and to even get this i have to use lib_nx.ini override to set red_AtMaxX/Y to 0.6666 to get it to only try and go up to 720p and have set min to 0.2 and it gets to _really_ low res, did you modify lib_nx.ini, are you on version 1.0 or 1.01, you are using the 60fps cheat in this thread yea?

 

[retnuh730]

this is the result me and my friend who have og v1 switch's have and to even get this i have to use lib_nx.ini override to set red_AtMaxX/Y to 0.6666 to get it to only try and go up to 720p and have set min to 0.2 and it gets to _really_ low res, did you modify lib_nx.ini, are you on version 1.0 or 1.01, you are using the 60fps cheat in this thread yea?
View attachment 492360

Why are you running in docked mode?

Using the 60fps cheat I posted in this thread, no lib_nx.ini modifications. v1.0.1.

Running in handheld mode at 720p/60 locked. Your config is trying to hit 1080p locked res and failing because those OCs definitely won't get you above 30 for 1080p.

I also have OLED Switch.

I also noticed you don't seem to have FPSLocker. That's a key component to actually push frame rate past 30 on switch. Essentially XC games use double buffer, so if you can't hit 60, it stays at 30. You can disable this with FPS locker, but it gives you artifacts which you don't super notice. In handheld mode you don't have to mess with disabling double buffer, but if you want high frame rates for 1080p, you probably will have to deal with a little artifacts as it might not get above 45 etc.

 

[lasyan3]

Ok finally I begin to figure it out how to port some mods from the Wii U to Switch (at least some easy ones).
First try: force gold treasure loot (to be tested!):

@nsobid-3F2425864CF226844511065F77AA3E36FB5FC33F

@flag offset_shift 0x100

@enabled
000849D8 20008052

@stop

 

[LuciferSK]

Ok finally I begin to figure it out how to port some mods from the Wii U to Switch (at least some easy ones).
First try: force gold treasure loot (to be tested!):

Can you try force Unlock all Skell

 

[YlwHrt]

Why are you running in docked mode?

Using the 60fps cheat I posted in this thread, no lib_nx.ini modifications. v1.0.1.

Running in handheld mode at 720p/60 locked. Your config is trying to hit 1080p locked res and failing because those OCs definitely won't get you above 30 for 1080p.

I also have OLED Switch.

I also noticed you don't seem to have FPSLocker. That's a key component to actually push frame rate past 30 on switch. Essentially XC games use double buffer, so if you can't hit 60, it stays at 30. You can disable this with FPS locker, but it gives you artifacts which you don't super notice. In handheld mode you don't have to mess with disabling double buffer, but if you want high frame rates for 1080p, you probably will have to deal with a little artifacts as it might not get above 45 etc.

this is what the game looks like without FPSLocker even in handheld on the max clock speeds (not what im actually gonna run at) so thank you for that, turning off vsync is required, sadly i still cant seem to hit 60fps constant in combat and running around and i cant handle the slowdown as it only hits around 55fps in the same areas as you, mariko OP i guess? guess illl just play at 30fps and wait for a potential delta time mod.

 

[Klx5]

Open citron or yuzu (use citron, it's just better)
Right click game.
Open mod data location.
Create new folder, name it whatever the cheat is (no skill cooldown, inf money, etc).
Open the folder you just made.
Make a new folder inside of it, name it "cheats".
Open the cheats folder you just made.
Make a txt file and name it the same thing as the cheat.txt you downloaded (3F2425864CF22684.txt).
Open the txt file and put the master code that was inside the downloaded txt file, and the cheat you want.
Repeat steps for each cheat you want.

Cheats are automatically enabled, if you want to disable them, right click the game in citron and click properties.

All together it should look like something like this:

Thank you very much. I will give this a try.

 

[Gamerjin]

@Gamerjin the Speed codes are crashing switch
@TomSwitch the all stats 500 code is crashing the switch, also my 9999 version is crashing it.
Ive also tested them myself
Any way you guys can fix these?

I can look into it.

 

[retnuh730]

this is what the game looks like without FPSLocker even in handheld on the max clock speeds (not what im actually gonna run at) so thank you for that, turning off vsync is required, sadly i still cant seem to hit 60fps constant in combat and running around and i cant handle the slowdown as it only hits around 55fps in the same areas as you, mariko OP i guess? guess illl just play at 30fps and wait for a potential delta time mod.
View attachment 492362

If you have time to troubleshoot, join the 60fps cheats discord, I think you're just missing something in the process here that's causing this.

https://discord.gg/VndKxFg7EE

 

[Flamerz]

Just wondering if somone can turn the 60fps code into dynamic 60fps so that the games doesnt go into slow motion when the fps drop

 

[YlwHrt]

If you have time to troubleshoot, join the 60fps cheats discord, I think you're just missing something in the process here that's causing this.

https://discord.gg/VndKxFg7EE

I don't think i am, its a clean install of edizon overlay (1.09), telsa menu (Ultrahand 1.8.2), fresh nx-ovlloader+(1.09), I'm using the 1.01 60fps patch from this thread, I'm using SaltyNX 1.20 and FPSLocker 2.10 to disable VSync, im on atmosphere 1.80 on firmware 19.0.1 with a early model erista unit. I mean maybe im missing something but this isnt really my first rodeo, the switch is being pushed to the redline, its hitting core1 usage of 97%, gpu is going between 70-90% usage.

 

[retnuh730]

I don't think i am, its a clean install of edizon overlay (1.09), telsa menu (Ultrahand 1.8.2), fresh nx-ovlloader+(1.09), I'm using the 1.01 60fps patch from this thread, I'm using SaltyNX 1.20 and FPSLocker 2.10 to disable VSync, im on atmosphere 1.80 on firmware 19.0.1 with a early model erista unit. I mean maybe im missing something but this isnt really my first rodeo, the switch is being pushed to the redline, its hitting core1 usage of 97%, gpu is going between 70-90% usage.
View attachment 492374

Can you try OC your ram too? I don't see anything weird there. Could the gap from Erista to Mariko really that large?

XC2 and XC3 bring mine to its knees but this has been a pretty easy to hit 60 for me. If they can figure out the QTE it would be perfect.

 

[Mokuu]

F11

Post automatically merged: Mar 21, 2025

for lossless use wgc so better latency and vram utilisation comparate to old dxgi

but work only in win11

shutter not a problem to lossless but only to game and shader compilate.
after shader compilated game is smooth.
its same to all 3d game

try the new citron nightly build with async shader cache option on (i think thats the name) removes the shader stutters and im pretty sure it just runs better overall. NLA seems to be a lot smoother too!
makes lossless work even better aswell ;>

 

[Solokazama]

Just wondering if somone can turn the 60fps code into dynamic 60fps so that the games doesnt go into slow motion when the fps drop

if you play on pc - use lossless gaming app (it really does the job) and it cost like 5$ on steam.
dont know if possible on the switch (didnt test yet).

 

[Flamerz]

if you play on pc - use lossless gaming app (it really does the job) and it cost like 5$ on steam.
dont know if possible on the switch (didnt test yet).

Yeah, I've used it uses a lot of vram to produce these frames which kinda cause fps loss on high resolution and also ghosting

I've used it for other games though

 

[Mokuu]

@TomSwitch
@WiduraGoez
@dsrules not sure who to tag for this request.
Infinite probes, all probes unlocked

Other then that if we could get a full map unlock and all tp points, would save a lot of travel time

i know im on a cheats forum but just wondering what do you guys get out of the game (an rpg with progression and exploration as the main focus) by cheating your way past any challenge or sense of exploration and achievement?

it really never made any sense to me, ahaha

 

[YlwHrt]

Can you try OC your ram too? I don't see anything weird there. Could the gap from Erista to Mariko really that large?

XC2 and XC3 bring mine to its knees but this has been a pretty easy to hit 60 for me. If they can figure out the QTE it would be perfect.

i could try, sysclk limit is 1600 so id need to use venom and venom overclocking is a bit more involved then i care to do atm

 

[Flamerz]

I don't think i am, its a clean install of edizon overlay (1.09), telsa menu (Ultrahand 1.8.2), fresh nx-ovlloader+(1.09), I'm using the 1.01 60fps patch from this thread, I'm using SaltyNX 1.20 and FPSLocker 2.10 to disable VSync, im on atmosphere 1.80 on firmware 19.0.1 with a early model erista unit. I mean maybe im missing something but this isnt really my first rodeo, the switch is being pushed to the redline, its hitting core1 usage of 97%, gpu is going between 70-90% usage.
View attachment 492374

Just wondering if you can give the fps code your using that doesnt cause slow down when its below 60fps