Hey guys switchroot recently released android 11 and it’s been awhile since I’ve seen any tutorials for setting up a multi boot switch (sysnand/emunand/Linux/android/lakka?)
any help would be appreciated
any help would be appreciated
The generalized steps would be:Is there a way to transfer save files from a clean switch to a jailbroken switch?
I have a clean switch that I have 100+ hours of Tears of the Kingdom on, recently I got a jailbroken one and want to continue playing over there. Is there any way to do this?
https://rentry.org/mys8qYes, there are several modchips that can be used to hack patched and newer Switch units. These include the SX Core, hwfly series, and picofly. You can find these on AliExpress or other resellers.
It depends. Do you think you will always have your Android phone on your person and a USB cable? If not, then an RCMLoader might be a better investment. Also, I cannot recommend any videos because its going to depend on what you use to enter RCM which can vary widely from jigs to paperclips to aluminum foil. RCM also looks identical to a black screen so you won't be able to tell its successful even after watching a video.
The SD card reader is actually quite fragile on the Switch so its recommended to not use more than 1 SD card per console for fear of breaking it.
Did you download your patches from this thread? If not, I highly recommend you do so as that thread always has the latest working patches.
That user you quoted hasn't logged on for 2 months so you probably won't get a response from him. Have you verified that your SD card is not fake?
The corruption is not rare at all. If you look around, you will find a plethora of threads about people experiencing corruption on exFAT. Even leading developers on Switch hacking highly dissuade against using it. Some hacks don't even support exFAT such as Lakka. There is absolutely no reason to use exFAT on the Switch; it is objectively inferior to FAT32. Also your CFW and homebrew will also be on the SD card as well as any cheats, mods, or whatever else you download so those will be lost if and when it corrupts if you use exFAT.
As for emuMMC, it can act as a cushion in the event of a brick since you can just remake emuMMC if it gets bricked. If your actual console is bricked, you either need a backup or shell out money for a new unit. It can also let you be on a higher firmware version without updating the actual firmware of your console. These are just a few advantages to using emuMMC.
Did you download your patches from this thread? If not, I highly recommend you do so as that thread always has the latest working patches.
Did you follow a specific guide to migrate from SX OS to Atmosphere?
Is there a way to transfer save files from a clean switch to a jailbroken switch?
I have a clean switch that I have 100+ hours of Tears of the Kingdom on, recently I got a jailbroken one and want to continue playing over there. Is there any way to do this?
Hi guys,
I need your help about a problem that i faced after updating the mod to the latest version.
To install game I've always used TinWoo Installer through the "install over USB" option but now it appears the following message: No USB connection detected, plug in to a compatible device to install over USB.
What it could be?
On my PC I've installed Windows 10 and the version of ns-usb loader is the 4.3 because the 7 is not working.
Thank you in advance and have a nice day.
Yes, I've already clicked on the gear in the app and this is the screen that appears at the end of the process:You have libusbk installed?
Yes, I've already clicked on the gear in the app and this is the screen that appears at the end of the process:
View attachment 379217
Already tried; i've never changed PC so it sounds strange that from one moment it stops workingIt seem you have the driver, what you can try is other usb ports/usb cables.
Already tried; i've never changed PC so it sounds strange that from one moment it stops working
1. When I created a emu nand, I couldn't remember which method I used, file based or partition. Is there a way to tell?
2. My switch crashes, suspecting it could be corrupt SD card. Would I have to create a new emu nand or shall I try copying it to new SD card?
Try deleting that program ID from your /atmosphere folder.https://rentry.org/mys8q
i did then i got this error
2345-0037 (0x4b59)
program: 0100000000000081
firmware: 10.2.0 (ATmosphere 1.5.4-master-3cb54e2b4)
You didn't already download them from the eShop on your Switch Lite? If not, then you risk getting banned if you go online since you've already run CFW. However if you're fine with the risk, you can dump your games with nxdumptool once you have installed them.I have a switch lite that's is running CFW. My question is can I install any of my owned games from the estore and create a backup of them for me to personally save on my HDD .
i got another problem when i boot to atmosphere and as soon as i put a game in i get. and yes it downgraded to 10.2.0|AMS 1.5.4|E from 16.0.3|AMS 1.5.4|E
- If you have file based, there will be a file that is around 29 GB on your SD card. If its partition based, the available space on your SD card will be 29 GB less than the actual SD card's total capacity
- If your SD card is exFAT, you will have to make a new emuMMC that is FAT32. Otherwise, you can try copying it to another SD card.
Try deleting that program ID from your /atmosphere folder.
You didn't already download them from the eShop on your Switch Lite? If not, then you risk getting banned if you go online since you've already run CFW. However if you're fine with the risk, you can dump your games with nxdumptool once you have installed them.
You downgraded firmware after updating? Your fuses were burned and now you’re unable to use game card on lower firmware.i got another problem when i boot to atmosphere and as soon as i put a game in i get. and yes it downgraded to 10.2.0|AMS 1.5.4|E from 16.0.3|AMS 1.5.4|E
errorcode 2002-2634 (0x149402)
program 010000000000001F
firmware 10.2.0 (atmos 1.5.4-master-3cb54e2b4)
when i try to go to hb menue(album) i get the following error
errorcode 2144-0001 (0x290)
program 010000000000001F
firmware 10.2.0 (atmos 1.5.4-master-3cb54e2b4)
when i boot to sx tells me it cant read game gards
I have a switch lite that's is running CFW. My question is can I install any of my owned games from the estore and create a backup of them for me to personally save on my HDD .
i was downloading files, a key fike to dump games, among others, got error message then was doing a clean copy and keep getting those messages. sx says am on fw 10.2You downgraded firmware after updating? Your fuses were burned and now you’re unable to use game card on lower firmware.
Second issue try deleting program # in atmosphere/contents/01xx1f