I cant get the switch to boot into rcm

[BronzeBlox]

I have tried 4 rcm jigs so far, none of them worked. Yes I am holding the vol up button while pressing power but still it boots up with the logo

 

[linuxares]

Is your Switch unpatched? Else it won't work.

 

[BronzeBlox]

Is your Switch unpatched? Else it won't work.

yeah its not patched I checked it

 

[linuxares]

So what do you do trying to enter RCM mode?

 

[BronzeBlox]

So what do you do trying to enter RCM mode?

So I plug the jig into the right rail, turn the device off and then hold down volume up button then press power. This is what I have been doing for the past hour or so.

 

[Hayato213]

https://gbatemp.net/threads/a-defin...atched-or-not-purchases-after-07-2018.512018/

Try this if you get 0x0000 it is patched.

 

[jeffyTheHomebrewer]

So I plug the jig into the right rail, turn the device off and then hold down volume up button then press power. This is what I have been doing for the past hour or so.

RCM doesn't show anything visible on the switch. Have you tried pushing a payload over USB from a computer to see if it can take payloads? (i.e. to confirm it truly is unpatched)