Hacking Sigpatches for Atmosphere (Hekate, fss0, fusee & package3)

  • Thread starter Thread starter ShadowOne333
  • Start date Start date
  • Views Views 5,316,031
  • Replies Replies 7,368
  • Likes Likes 266
I'm on the most recent version of atmosphere and hekate, with firmware update 15.0.1 and I've tried using the stickied sigpatches and still get error 2002-4058 (0x1FB402) on Goldleaf when trying to install something. Is there anything else that could cause this?
(I had to edit the message I was replying to since I can't have links in my messages)
Please post your /bootloader/hekate_ipl.ini file here.

Probably missing kip1patch=nosigchk
or
Need to use Lockpick_RCM to dump your latest /switch/prod.keys
(you probably did this before but don’t have the latest 15.0.0 keys that include the latest _0E key)
 
Last edited by binkinator,
  • Like
Reactions: impeeza
Please post your /bootloader/hekate_ipl.ini file here.

Probably missing kip1patch=nosigchk
or
Need to use Lockpick_RCM to dump your latest /switch/prod.keys
(you probably did this before but don’t have the latest 15.0.0 keys that include the latest _0E key)
When I've tried using Lockpick the nro crashes out. It looks like now it's a payload bin file that I need to launch. Since I don't want to risk messing up my system taking a swing at it, could you confirm if and how I would be running it in Hekate?
I really appreciate your help.
 
When I've tried using Lockpick the nro crashes out. It looks like now it's a payload bin file that I need to launch. Since I don't want to risk messing up my system taking a swing at it, could you confirm if and how I would be running it in Hekate?
I really appreciate your help.
you need latest lockpick_RCM (no just lockpick) with support of latest firmware https://github.com/shchmue/Lockpick_RCM/releases

Lockpick_RCM is a Payload.

The ancient Lockpick NRO stops working several years ago.
 
Last edited by impeeza,
  • Like
Reactions: binkinator
When I've tried using Lockpick the nro crashes out. It looks like now it's a payload bin file that I need to launch. Since I don't want to risk messing up my system taking a swing at it, could you confirm if and how I would be running it in Hekate?
I really appreciate your help.
Place the lockpick_rcm.bin file @impeeza linked to in /bootloader/payloads/

Boot and stop Hekate by tapping (Vol -) then hit the Payloads tab and finally hit Lockpick_RCM. Dump,keys from Sysnand or Emunand…it doesn’t matter. Look for prod.keys in /switch directory
 
  • Like
Reactions: impeeza
you need latest lockpick_RCM (no just lockpick) whit support with latest firmware

Lockpick_RCM is a Payload.

The ancient Lockpick NRO stops working several years ago.
Thank you, I'm getting it now. Do I launch the payload in Hekate or TegraRCM?
Edit: By the time I asked I got notified of @binkinator's reply. Thank you for the help.
Second edit: Dump from sysNAND or emuNAND?
Post automatically merged:

@binkinator here is the /bootloader/hekate_ipl.ini

[config]
autoboot=0
autoboot_list=0
bootwait=0
autohosoff=0
autonogc=1
updater2p=1
backlight=100

[CFW - sysMMC]
fss0=atmosphere/package3
kip1patch=nosigchk
atmosphere=1
emummc_force_disable=1
icon=bootloader/res/icon_payload.bmp

[CFW - emuMMC]
fss0=atmosphere/package3
kip1patch=nosigchk
emummcforce=1
atmosphere=1
icon=bootloader/res/icon_payload.bmp

[Stock - sysMMC]
fss0=atmosphere/package3
emummc_force_disable=1
stock=1
icon=bootloader/res/icon_switch.bmp
 
Last edited by shapeshxfter,
  • Like
Reactions: impeeza
Thank you, I'm getting it now. Do I launch the payload in Hekate or TegraRCM?
Edit: By the time I asked I got notified of @binkinator's reply. Thank you for the help.
Second edit: Dump from sysNAND or emuNAND?
Post automatically merged:

@binkinator here is the /bootloader/hekate_ipl.ini

[config]
autoboot=0
autoboot_list=0
bootwait=0
autohosoff=0
autonogc=1
updater2p=1
backlight=100

[CFW - sysMMC]
fss0=atmosphere/package3
kip1patch=nosigchk
atmosphere=1
emummc_force_disable=1
icon=bootloader/res/icon_payload.bmp

[CFW - emuMMC]
fss0=atmosphere/package3
kip1patch=nosigchk
emummcforce=1
atmosphere=1
icon=bootloader/res/icon_payload.bmp

[Stock - sysMMC]
fss0=atmosphere/package3
emummc_force_disable=1
stock=1
icon=bootloader/res/icon_switch.bmp
You have kip1patch=nosigchk in your CFW - emuMMC section so you’re good to go already.

If you haven’t done already, you want to dump keys from your most up to date NAND. If they are on the same FW version then either one will do.
 
  • Like
Reactions: impeeza
hello, if my switch ofw and emunand were at 15.0.0 and i were to update to ofw 15.0.1. what would i need to do to the emunand?
 
  • Like
Reactions: mrdude and impeeza
i have another question. i would like to play this nsp but it ask to be linked to nintendo account to start. is there a way around this?
 
CURRENT BETA SIGPATCHES UPDATED FOR FW 15.0.1 AND ATMOSPHERE v1.4.0
dude i only registered because i had to say thanks to you. really, thanks damn so much. it's been two days of stress, trying every installation tool, changing sigpatches, messing with files and making even more mess. at the end i found your post. drag and dropped your folder into my switch. replaced files. work now. god damn. god flipping damn, dude! THANKS!!! :)))
 
Hi guys. I am in process of updating content on my Switch mSD card in order to upodate System FW to 14.1.0 through Daybreak, at part where I update sigpatches. Do I need to replace my current hekate_ipl file? There is an hekate_ipl file in the bootloader directory of sigpatches download file. In the included hekate_ipl file that is in sigpatches download, I am concerned about this line: autonogc=1. In my ipl file, it is set to 0. Here is the name of the Sigpatch file I downloaded: Hekate+AMS-package3-sigpatches-1.4.0-cfw-15.0.0
Help appreciated :)
 
Hi again guys. I was planning to update my hackable Switch to FW 14.1.0 through Daybreak, but have a question/concern before proceeding. I looked at the "patches" file in the bootloader directory of the sigpatches download file in this thread, but saw no mention of 14.1.0. I only saw entries for FS 14.0.0, and FS 14.0.0 ExFAT, then goes to 15.0.0 and 15.0.0 ExFAT. My question is, does the sigpatches download file in this thread have patches for System FW 14.1.0? Thoughts and help appreciated :)
 
Last edited by impeeza,
I apologize if this is an obvious question, but I'm quite new to this. I can't seem to find anyone asking this, either.

When using atmosphere and hetake, where do I put the OP attachment hekate-ams-package3-sigpatches-1-4-0-cfw-15-0-0-zip.332606/ ?
 

Site & Scene News

Popular threads in this forum