its hekate_ctcaer_6.0.3 from this guide. i wonder if the problem could come that i have to format the sd card before starting.
Generally in my experience you only have to delete the atmosphere and the folder
its hekate_ctcaer_6.0.3 from this guide. i wonder if the problem could come that i have to format the sd card before starting.
Probably not needed as Hekate will do that for you regardless while creating an emuMMC. If i were you, I'd update to the latest version of Hekate and its payload and try again.i wonder if the problem could come that i have to format the sd card before starting.
Yes, I have the last firmware and Atmosphere updated. In the past, with the hack already, I never returned any problems, the problem started recently.Is your console hacked, either now or previous
Here's what you need to know.How do keep my Switch safe from bans? I know nothing is totally safe, right now it’s booting normally and I understand there’s some caveats but what’s a bare minimum I should be doing so if I boot by injecting a payload I’ll be able to go back and play online?
Copying the backup files from my old sd helped me only get into atmosphere from CFW sysmmc. CFW emummc gives me unkown pkg1 version hos version not supportedor emummc corruptI had some corrupt files on my sd card. used guiformater and h2testw card is now working again.
I just installed android using the latest hekate
I'm now restoring my backup to the sd card with my game/atmosphere data...
should I just copy the old hekate and atmosphere?
I don't want hekate to crash after restoring my old files
Well do you have any cheats or sysmodules enabled?Yes, I have the last firmware and Atmosphere updated. In the past, with the hack already, I never returned any problems, the problem started recently.
The only files you need to keep are the Nintendo folder. Everything else can be readily downloaded online.If I am going to sell my modded Switch, what files do I absolutely need to keep on the microSD card. Want to format my SD card but I am assuming I should probably keep the bootloader folder etc.
No, always grab the latest Hekate and Atmosphere when you have a chance.I had some corrupt files on my sd card. used guiformater and h2testw card is now working again.
I just installed android using the latest hekate
I'm now restoring my backup to the sd card with my game/atmosphere data...
should I just copy the old hekate and atmosphere?
I don't want hekate to crash after restoring my old files
Instead of Quark, I'd highly recommend using TinWoo Installer instead. Its what I personally use and I never have any issues while using it.It´s been around 4 years since the last time i used cfw (sx os). Now I've installed emu nand with fw 17, atmosphere 1.6.1 and the latest sigpatches. The problem is that whenever i try to copy a game (16 Gb) to the SD (400 Gb), my pc tells me that the SD is full but if i check the storage it still has 350 Gb free out of 375 Gb. Is there another way to transfer files ? Or is my SD some kind of corrupt ?
*Edit* Just found that Quark exists
I gave up all hope on my old files.my switch is corrupted with fatal error running fusee invalid GPT signature
I thought I could restore a eMMC BOOT0 & BOOT1 backup
and the eMMC RAW GPP backup
and prod.keys
problem is I forget the file structure / directory to put the 2 folders and .keys
I'm at a loss
so i manually added the sigpatches linked on the last page, and re downloaded the newest atmosphere. my ini file is correct, but i'm getting a yellow screen when i try to boot emunand. its been years since i hacked this thing and i just updated when the new stuff comes out. my ofw partition is on the latest ofw.
@impeeza was just telling you to unwipe your prod.info. In other words, you would open the file exosphere.ini in a text editor and set blank_prodinfo to 0. Save your changes, and bam, your serial number is un-hidden. Probably need a reboot of Atmosphere to take effect. You could also just remove exosphere.ini or rename it. Of course, be careful going online in this state if you care about remaining unbanned.i was told to ask in here instead of another thread.
anyone have any idea if i did something wrong or what i can do to fix it?
i asked in that thread and was linked to here:
https://github.com/Atmosphere-NX/Atmosphere/issues/2215
i dont see a fix just how to reproduce it.
where is that file located usually?@impeeza was just telling you to unwipe your prod.info. In other words, you would open the file exosphere.ini in a text editor and set blank_prodinfo to 0. Save your changes, and bam, your serial number is un-hidden. Probably need a reboot of Atmosphere to take effect. You could also just remove exosphere.ini or rename it. Of course, be careful going online in this state if you care about remaining unbanned.
Then maybe that's not the source of your problem. Your serial number is plainly visible, right? Not just a bunch of 000000?where is that file located usually?
edit:nevermind found it
edi2:
both of the prodinfo are set to 0 already?
blank_prodinfo_sysmmc=0
blank_prodinfo_emummc=0
should i just delete it?
in the exosphere file? no. everything is set to 0 and theres no serial number in the fileThen maybe that's not the source of your problem. Your serial number is plainly visible, right? Not just a bunch of 000000?
Oh, I see. You don't have access to your serial number. If you boot without your SD card, what happens?in the exosphere file? no. everything is set to 0 and theres no serial number in the file
i cant boot to emunand or sysnand because of the yellow screen, but i can boot to the hekate menu stuff.
i get the regular switch ofw partition i left alone. which i never to to because i have sysnand and emunand.Oh, I see. You don't have access to your serial number. If you boot without your SD card, what happens?