Hacking [Release]NTR CFW 3.2 with experimental Real-Time Save feature.

[hacksn5s4]

i do have aureinand already and sysnand with custom firmware ive tried different versions but none of them will work

 

[Serphirot]

i dont understand what you mean with "you have to use 10.2 firm with that version"

my al9h sysnand displays version 10.7 and i simply start ntr (no emunand at 10.2) -> and debugger & co works

NTR can´t load the 10.4 firm which is normaly used by 10.4 or higher versions of you´r nand.
You have to use 10.2 firm which is just a file on you´r sd card and not the actual version of you´r nand.

 

[hacksn5s4]

where do i get firm fire from

 

[Serphirot]

i do have aureinand already and sysnand with custom firmware ive tried different versions but none of them will work

Which version of aureinand do you have?
If you have the most recent version you just have to put the ntr firm from her github page into the aurei folder and ntr should start.

Edit1: Oh never mind I just found out that she does´t has the link any more on her Github page.

 

[hacksn5s4]

Which version of aureinand do you have?
If you have the most recent version you just have to put the ntr firm from her github page into the aurei folder and ntr should start.

Edit1: Oh never mind I just found out that she does´t has the link any more on her Github page.

how do i get it then

 

[Serphirot]

how do i get it then

Ok found it Pailect has it still in his guide.
Here is the link to his guide: https://github.com/Plailect/Guide/wiki/Part-5-(arm9loaderhax-&-AuReiNAND)
There you have to pick in "what you need" the ntr firm for you´r device.

 

[cavolo]

Hey there, any one has built the bootNTR with auto-exit to home menu for the latest ntr ? Because my Home button doesn't work so ...

 

[YyAoMmIi]

I'm lazy to look in the thread, but how does editing the shortcuts to NTR menu work? Want to take screenshots without pressing X+Y or Start+select, but that only options it give.

 

[cavolo]

Iirc, you have to open the NTR menu, then from there you can choose screenshot shortcut, but only from a pre-defined list.

 

[olizbu]

Hey there, any one has built the bootNTR with auto-exit to home menu for the latest ntr ? Because my Home button doesn't work so ...

You can use START

 

[cavolo]

You can use START

Didn't know haha, thanks

 

[Nyshan]

Whenever I try to change streaming with remoteplay() on 3.4 I get an error: "remoteplay() takes no arguments (4 given)."

 

[GoddessKozy]

I'm just going to leave this here since it's the official thread and all.

So, seems just a page before this it was talked about, but the broken English was kind of hard to follow so it just made me more confused. (No offense though since English is a hard language).

I have the firmware.bin file at the root of my sd card and in the aurei folder (i'm still on this release https://github.com/AuroraWright/Luma3DS/releases/tag/v5.0.), ntr.bin at the root, and I'm using Shadowtrance's 3.2 fork though I also tried the 3.3. Can't use the newer ones since I'm on o3DS.

I get errors about missing ntr config, unknown firm "access checks could not be patched (or smth, it goes away fast)", and of course the good 'ol "Current firmware not supported."

3.2 worked perfectly back when I was on rxtools 10.7, but I made a rednand instead of just flashing emuNAND so I don't have it set up anymore. Any help would be great and I can provide more info if needed.

Doesn't seem to need to be rebooted either, I've tried quite a few times now.

 

[Shadow#1]

I'm just going to leave this here since it's the official thread and all.

So, seems just a page before this it was talked about, but the broken English was kind of hard to follow so it just made me more confused. (No offense though since English is a hard language).

I have the firmware.bin file at the root of my sd card and in the aurei folder (i'm still on this release https://github.com/AuroraWright/Luma3DS/releases/tag/v5.0.), ntr.bin at the root, and I'm using Shadowtrance's 3.2 fork though I also tried the 3.3. Can't use the newer ones since I'm on o3DS.

I get errors about missing ntr config, unknown firm "access checks could not be patched (or smth, it goes away fast)", and of course the good 'ol "Current firmware not supported."

3.2 worked perfectly back when I was on rxtools 10.7, but I made a rednand instead of just flashing emuNAND so I don't have it set up anymore. Any help would be great and I can provide more info if needed.

Doesn't seem to need to be rebooted either, I've tried quite a few times now.

Update to Luma3DS and put the 10.2 NATIVE_FIRM in the Luma folder

Sent from my LG-D851 using Tapatalk

 

[GoddessKozy]

Alright, didn't realize it was a Luma problem rather than NTR.

Thanks so much!

 

[cvskid]

Anyone know where screenshots are saved after taking one and what file format they are in?

 

[Shadow#1]

Anyone know where screenshots are saved after taking one and what file format they are in?

Root of sd card the .bmp files

Sent from my LG-D851 using Tapatalk

 

[FONZD]

I already posted this in another thread but this one seems more appropriate...

Here is a new build with a new banner:

Enjoy !

 

[Ryumaru]

I already posted this in another thread but this one seems more appropriate...

Here is a new build with a new banner:

Enjoy !

It was better than the original.

 

[GoddessKozy]

It's me again! Hope I'm not totally annoying yet.

Anyways, is it normal to have issues when using plugins off of speedfly? I'm trying to use this one: http://www.speedfly.cn/9766.html

I put a video on my twitter showing what happens when I try to launch it in NTR mode: https://twitter.com/sumarucity/status/725635953528737792

I've verified that the files are on the directory correctly, and NTR mode runs other games correctly. It also runs SMTIV fine if I remove the plugin folder.

I'm on o3DS Luma w/ A9LH, everything is updated. Using NTR 3.3. (Video shows 3.2, I updated afterwards and it still wouldn't work.)

At this point I can't tell what the issue is, likely something with the plugin but if the game is known to have issues with NTR or not I thought I might as well report and ask for help.

I'm just really confused because it has worked, but then something happened and it won't anymore. I didn't mess with any files before it stopped working, I'm pretty sure.