Hacking NTR 3.4 Screen Recorder Test Thread

[Phil5004]

> connect('192.168.122.41', 8000)
Ein Verbindungsversuch ist fehlgeschlagen, da die Gegenstelle nach einer bestimmten Zeitspanne nicht richtig reagiert hat, oder die hergestellte Verbindung war fehlerhaft, da der verbundene Host nicht reagiert hat 192.168.122.41:8000
bei System.Net.Sockets.TcpClient.Connect(String hostname, Int32 port)
bei ntrclient.NtrClient.connectToServer()
bei ntrclient.ScriptHelper.connect(String host, Int32 port)
bei Microsoft.Scripting.Interpreter.ActionCallInstruction`3.Run(InterpretedFrame frame)
bei Microsoft.Scripting.Interpreter.Interpreter.Run(InterpretedFrame frame)
bei Microsoft.Scripting.Interpreter.LightLambda.Run5[T0,T1,T2,T3,T4,TRet](T0 arg0, T1 arg1, T2 arg2, T3 arg3, T4 arg4)
bei System.Dynamic.UpdateDelegates.UpdateAndExecute4[T0,T1,T2,T3,TRet](CallSite site, T0 arg0, T1 arg1, T2 arg2, T3 arg3)
bei Microsoft.Scripting.Interpreter.DynamicInstruction`5.Run(InterpretedFrame frame)
bei Microsoft.Scripting.Interpreter.Interpreter.Run(InterpretedFrame frame)
bei Microsoft.Scripting.Interpreter.LightLambda.Run2[T0,T1,TRet](T0 arg0, T1 arg1)
bei IronPython.Compiler.PythonScriptCode.RunWorker(CodeContext ctx)
bei Microsoft.Scripting.Hosting.ScriptSource.Execute(ScriptScope scope)
bei ntrclient.CmdWindow.runCmd(String cmd)

Can anyone help me?

 

[Asia81]

Hi guys,
What do you use to record the ntrviewer windows?

I tried Bandicam and HyperCam4, but I can't record the same quality as the ntrviewer windows...

 

[NekoMichi]

Hi guys,
What do you use to record the ntrviewer windows?

I tried Bandicam and HyperCam4, but I can't record the same quality as the ntrviewer windows...

I'm using QuickTime, but that's only because Windows is running as a virtual machine under OS X. I think Windows 10 has a built-in screen recorder. Fraps should also work.

 

[thekarter104]

I'll try on my old 3DS and see what will happen

 

[Phil5004]

I cant use this with my N3DS :/

 

[NekoMichi]

I'll try on my old 3DS and see what will happen

NTR probably won't boot.

I cant use this with my N3DS :/

What happens when you try to boot into NTR?

 

[astronautlevel]

> connect('192.168.122.41', 8000)
Ein Verbindungsversuch ist fehlgeschlagen, da die Gegenstelle nach einer bestimmten Zeitspanne nicht richtig reagiert hat, oder die hergestellte Verbindung war fehlerhaft, da der verbundene Host nicht reagiert hat 192.168.122.41:8000
bei System.Net.Sockets.TcpClient.Connect(String hostname, Int32 port)
bei ntrclient.NtrClient.connectToServer()
bei ntrclient.ScriptHelper.connect(String host, Int32 port)
bei Microsoft.Scripting.Interpreter.ActionCallInstruction`3.Run(InterpretedFrame frame)
bei Microsoft.Scripting.Interpreter.Interpreter.Run(InterpretedFrame frame)
bei Microsoft.Scripting.Interpreter.LightLambda.Run5[T0,T1,T2,T3,T4,TRet](T0 arg0, T1 arg1, T2 arg2, T3 arg3, T4 arg4)
bei System.Dynamic.UpdateDelegates.UpdateAndExecute4[T0,T1,T2,T3,TRet](CallSite site, T0 arg0, T1 arg1, T2 arg2, T3 arg3)
bei Microsoft.Scripting.Interpreter.DynamicInstruction`5.Run(InterpretedFrame frame)
bei Microsoft.Scripting.Interpreter.Interpreter.Run(InterpretedFrame frame)
bei Microsoft.Scripting.Interpreter.LightLambda.Run2[T0,T1,TRet](T0 arg0, T1 arg1)
bei IronPython.Compiler.PythonScriptCode.RunWorker(CodeContext ctx)
bei Microsoft.Scripting.Hosting.ScriptSource.Execute(ScriptScope scope)
bei ntrclient.CmdWindow.runCmd(String cmd)

Can anyone help me?

I can't speak german, but it sounds like you didn't start the debugger.

Hi guys,
What do you use to record the ntrviewer windows?

I tried Bandicam and HyperCam4, but I can't record the same quality as the ntrviewer windows...

I use Camtasia Studio.

 

[Phil5004]

I can't speak german, but it sounds like you didn't start the debugger.

That's from the debugger..

 

[astronautlevel]

That's from the debugger..

Did you enable debugger on the ntr menu? Press x+y on the home menu -> enable debugger.

 

[thekarter104]

What's the title id to uninstall NTR CFW 2.4?

 

[xavix]

Hi guys,
What do you use to record the ntrviewer windows?

I tried Bandicam and HyperCam4, but I can't record the same quality as the ntrviewer windows...

I use,
OBS.

 

[mungry]

May as well dump my tests onto this thread for more views haha

 

[NekoMichi]

Generic question about Wi-Fi:
If I get a 2.4/5GHz simultaneous dual-band router, does that mean that when I connect my 3DS (which only supports 2.4GHz), the router won't restrict all traffic to lower speeds, and still allow my laptop to connect at 5Ghz?

 

[astronautlevel]

Generic question about Wi-Fi:
If I get a 2.4/5GHz simultaneous dual-band router, does that mean that when I connect my 3DS (which only supports 2.4GHz), the router won't restrict all traffic to lower speeds, and still allow my laptop to connect at 5Ghz?

Yes, but it's probably still better to connect over Ethernet.

 

[CosmoCortney]

Gave it a shot yesterday. It's pretty decent so far.
Streaming video while being in the main menu has a very decent framerate to me.
MM3D runs at about 40fps. But the bottom screen only refreshes like every third second :/
Tri Force Heroes is being streamed at 10fps.

I have connected the 3DS' router to my PC via ethernet cable. The transferrate of the stream is at about 1.5MBytes/s.
It'd be cool to have the left and right channel being streamed, so we could capture our footage in 3D

 

[thekarter104]

Ok so I installed NTR CFW 3.4 with FBI, it asked to overwrite it and I said yes.
When I boot it, it says BootNTR 2.4 o.o

It did its thing and freezes on kernelhax done.
How do I install the new 3.4 correctly and does it work on 10.7 emuNAND?

 

[NekoMichi]

Ok so I installed NTR CFW 3.4 with FBI, it asked to overwrite it and I said yes.
When I boot it, it says BootNTR 2.4 o.o

It did its thing and freezes on kernelhax done.
How do I install the new 3.4 correctly and does it work on 10.7 emuNAND?

Mine says 2.4 too, but displays 3.4 on the NTR menu. Do you have the correct firmware.bin file? This might interfere with NTR booting.

 

[Sliter]

MAAAN I was thinking I could just keep at RX (when I get a 3Ds again) but this is totally necessary and awesome lol want to test out!

 

[thekarter104]

Mine says 2.4 too, but displays 3.4 on the NTR menu. Do you have the correct firmware.bin file? This might interfere with NTR booting.

Yes, I have, what else is going on ??

 

[astronautlevel]

MAAAN I was thinking I could just keep at RX (when I get a 3Ds again) but this is totally necessary and awesome lol want to test out!

NTR CFW can be loaded on top of other CFW, such as rxTools. That being said, I don't recommend rxTools anymore and instead recommend ARN.