Does anyone know how to get pass those hidden screws under the rubber plugs thing, can't find a screw driver that fits
Little More Specific PleaseYou have to buy the appropriate screwdriver to do it... a cross shaped screwdriver at the right size.
if only there directly connected to a sd, if a port then noSo, do i have to remove my wires to make 3DS bot normally after flashing the mpdified NAND?
i have them connected to an SD. The weird thing about it was that i would get the blue screen even when i only had wires connected to the boardif only there directly connected to a sd, if a port then no
It seems you put the ribbon above the connector instead of below.
Now the connector should be relaxed because the valve should never be raised.
I suggest you to send your console to a professional for repairing.
you have broken the connectors they are not supposed to be lifted up, from the pictures the tops look like they have been snapped off, you were supposed to just pull the cable out without pulling/lifting anythingHere, I tried to take a better picture. I'm pretty sure the ribbon is touching the pins, I can't see how it is "above" the connector: if I press it while pressing the home button when the 3DS is turned on, it's properly detected.
they are not supposed to be lifted up
for your clarity I use a phillips #00 and i pry out the plug with a fingernail. it's pretty easy, and don't strip your screws.So Does anyone know the screwdriver ima need to open those 2 hidden screws under the rubber plugs
Is it plugged in while it's turning on?I'm having some issues with this mod on on New 3DS XL. Weeks ago I installed a micro USB port in the 3DS and used it to downgrade from 10.4 - it worked. Now, it boots up normally instead of giving me an error message even though it's connected to the SD reader and the reader is plugged in. Does anyone know what this might mean? No wires are loose, I redid everything to make sure. Same result.
Yes. If I turn the 3DS on before connecting it to the PC (while connected to the SD reader), I get the error message reading:Is it plugged in while it's turning on?
Then what's the problem?Yes. If I turn the 3DS on before connecting it to the PC (while connected to the SD reader), I get the error message reading:
That's not the error code I'm looking for. If I plug it into the PC while it's in this state, I still get nothing.Then what's the problem?
People have different error codes , what's the sd card reader your using, if the program can't see it it's always the sd card fault or its readerThat's not the error code I'm looking for. If I plug it into the PC while it's in this state, I still get nothing.
Well the error code I consistently got when it was working ended in "00000200 00000000". I'm using this adapter made by Omega:People have different error codes , what's the sd card reader your using