Hacking 3DS NOOB PARADISE - Ask questions here

  • Thread starter Cyan
  • Start date
  • Views 4,545,617
  • Replies 53,799
  • Likes 43

Prior22

Well-Known Member
Member
Joined
Sep 23, 2010
Messages
933
Trophies
1
XP
2,953
Country
United States
Before you do anything, backup your save games by following this https://gbatemp.net/threads/importing-gateway-saves-to-cia-games.425743/
You'll be able to install JKSM by using FBI.3ds from your Gateway card to install JKSM.cia
Then, follow https://3ds.guide
You'll be able to use either the browser if you have one, or MSET (similar to how you install the DS profile exploit for Gateway).

  1. Reboot the system, then go to System Settings, then “Other Settings”, then “Profile”, then “Nintendo DS Profile”
  2. If the exploit was successful, you will have booted into SafeB9SInstaller
Ended up getting a blank gray screen rather than SafeB9SInstaller. Trying to figure out what I did wrong.

SafeB9SInstaller.nds is on DS cart.

boot.3dsx, SafeB9SInstaller.dat, boot.firm all on SD Card. As well as boot9strap folder with two required files inside.

Firmware is 4.4.0-10u, so I downloaded the 4.0 to 4.5 Installing boot9strap (MSET).

Also my NDS flashcart is a blue gateway.
 

Quantumcat

Dead and alive
Member
Joined
Nov 23, 2014
Messages
15,144
Trophies
0
Location
Canberra, Australia
Website
boot9strap.com
XP
11,119
Country
Australia
  1. Reboot the system, then go to System Settings, then “Other Settings”, then “Profile”, then “Nintendo DS Profile”
  2. If the exploit was successful, you will have booted into SafeB9SInstaller
Ended up getting a blank gray screen rather than SafeB9SInstaller. Trying to figure out what I did wrong.

SafeB9SInstaller.nds is on DS cart.

boot.3dsx, SafeB9SInstaller.dat, boot.firm all on SD Card. As well as boot9strap folder with two required files inside.

Firmware is 4.4.0-10u, so I downloaded the 4.0 to 4.5 Installing boot9strap (MSET).

Also my NDS flashcart is a blue gateway.
Did you do this first?
  1. Start your DS flashcart from your device
  2. Boot SafeB9SInstaller.nds using your flashcart
  3. Select the correct option for your system version
    • 4.X.X -> “4.x SafeB9SInstaller”
    • 6.X.X -> “6.x SafeB9SInstaller”
 

KunoichiZ

Well-Known Member
Member
Joined
Mar 16, 2012
Messages
8,830
Trophies
0
Age
28
XP
4,597
Country
United States
Took a bit of time but I finally managed to install the CFW. Just out of curiosity is it possible to delete pre-installed programs (like face raiders)? Or if not can I at least delete the icons from the main menu?
You can delete them but then you'll be asked to update your system (even if you're on the latest), which will bring them back. I'd just put them in a folder and forget about them.
 
  • Like
Reactions: Quantumcat

Myobi

Active Member
Newcomer
Joined
Nov 28, 2013
Messages
41
Trophies
0
XP
148
Country
It happens after booting up the homebrew launcher, when selecting the safeh4x from the list.
I've made sure my wifi is connected, but I haven't tried yet the r9 release as suggested by the guide, wanted to make sure that I was following the correct one first.

And yes, I'm using the N3ds SD (32Gb), and my problem isn't really the language, but still thanks!
 

LiLCruz

Well-Known Member
Newcomer
Joined
May 20, 2009
Messages
45
Trophies
1
XP
311
Country
United States
Just follow https://3ds.guide. There is no reason to stay on low firmware these days.
Thanks for reply but I'm trying hack 3ds with emunand setup without updating the firmware I know no point being on 2.1.0-4U but I just want to use updated emunand leaving my main firmware on 2.1.0-4U I know this sounds dumb but I pretty much don't want hack my 3ds all the way & use emunand is it possible? or there tutorial how do it this way?
 
Last edited by LiLCruz,

Uumas

Well-Known Member
Member
Joined
Sep 17, 2016
Messages
2,004
Trophies
0
Age
22
XP
1,157
Country
Finland
Thanks for reply but I'm trying hack 3ds with emunand setup without updating the firmware I know no point being on 2.1.0-4U but I just want to use updated emunand leaving my main firmware on 2.1.0-4U I know this sounds dumb but I pretty much don't want hack my 3ds all the way & use emunand is it possible? or there tutorial how do it this way?
I don't think that's possible and even if it is why'd you want to do that?
 

Myobi

Active Member
Newcomer
Joined
Nov 28, 2013
Messages
41
Trophies
0
XP
148
Country
Fuck my life, managed to solve the problem I was having only to fuck up right after.

Quick question, I forgot to check the option:
  • “Show NAND or user string in System Settings”
Now every time I run the sound exploit to see if I could reinstall the damn thing the console kind of crashes, any further suggestions ? >.<
 

KunoichiZ

Well-Known Member
Member
Joined
Mar 16, 2012
Messages
8,830
Trophies
0
Age
28
XP
4,597
Country
United States
Fuck my life, managed to solve the problem I was having only to fuck up right after.

Quick question, I forgot to check the option:
  • “Show NAND or user string in System Settings”
Now every time I run the sound exploit to see if I could reinstall the damn thing the console kind of crashes, any further suggestions ? >.<
You've done everything right except for two things:
A) you can no longer use soundhax and
B) to change your Luma settings, you need to hold the Select button while you boot your system (hold it down then press the Power button) then make sure to hit the "Show NAND blah blah" option when the Luma3DS config options show up. Press Start to save.
 

Myobi

Active Member
Newcomer
Joined
Nov 28, 2013
Messages
41
Trophies
0
XP
148
Country
Fixed, god damnit you guys are the best, thanks!

Edited:

Kay! I’m finally done, followed the guide to the end without any further issues and even installed free shop as well, you guys have no clue how thankful I am for your help. Although, I still haven’t figured out how to use the R4 card itself, I’ve copied some roms I had on my PC already , but the console doesn’t seem to eve detect the cartridge.
 
Last edited by Myobi,
  • Like
Reactions: KunoichiZ

Certando

New Member
Newbie
Joined
Jul 28, 2017
Messages
1
Trophies
0
Age
23
XP
57
Country
United States
If I were to order a 3ds LL (Japanese region) and try to install Boot9Strap with a flashcart, would any flashcart listed on the compatibility list work or would I need one specifically for a japanese console?
In other words- do the flashcarts on the 3ds.guide compatibility list work with a Japanese console?

If anyone can answer this, I'd really appreciate it.
 

Uumas

Well-Known Member
Member
Joined
Sep 17, 2016
Messages
2,004
Trophies
0
Age
22
XP
1,157
Country
Finland
Fixed, god damnit you guys are the best, thanks!

Edited:

Kay! I’m finally done, followed the guide to the end without any further issues and even installed free shop as well, you guys have no clue how thankful I am for your help. Although, I still haven’t figured out how to use the R4 card itself, I’ve copied some roms I had on my PC already , but the console doesn’t seem to eve detect the cartridge.
You need to follow the part at the end of the installing boot9strap ntrboot page to restore normal flashcard functionality. Keep in mind the card can only be used for old ds roms.
 

Myobi

Active Member
Newcomer
Joined
Nov 28, 2013
Messages
41
Trophies
0
XP
148
Country
You sure about that? Because on the store page it says kind of says the opposite: https://www.nds-card.com/ProShow.asp?ProID=574

It should be able to run 3ds roms, just not old DS ones, either way, as long as free shops works with the 3ds ones I should be fine I guess.

Anyway, took me a little but I found the part of the guide you were talking about, tomorrow I’ll give it a go, big thanks!
 

KunoichiZ

Well-Known Member
Member
Joined
Mar 16, 2012
Messages
8,830
Trophies
0
Age
28
XP
4,597
Country
United States
You sure about that? Because on the store page it says kind of says the opposite: https://www.nds-card.com/ProShow.asp?ProID=574

It should be able to run 3ds roms, just not old DS ones, either way, as long as free shops works with the 3ds ones I should be fine I guess.

Anyway, took me a little but I found the part of the guide you were talking about, tomorrow I’ll give it a go, big thanks!
It doesn't even mention it can play 3DS ROMs. :/ Don't know where you see that at. Having "3DS" in the title doesn't mean it runs 3DS ROMs.
 

Myobi

Active Member
Newcomer
Joined
Nov 28, 2013
Messages
41
Trophies
0
XP
148
Country

KunoichiZ

Well-Known Member
Member
Joined
Mar 16, 2012
Messages
8,830
Trophies
0
Age
28
XP
4,597
Country
United States
Eck, getting kind of confused then… I mean, I kind of assumed it could since it says it can’t run NDS roms, if it can’t run N3DS roms either, what’s exactly it’s function then? I also had asked about it some pages ago (https://gbatemp.net/threads/3ds-noob-paradise-ask-questions-here.359035/page-2222#post-7766511) , but I guess I kind of misunderstood the answer.
Its function is to install b9s on your 3DS as the card comes preflashed with ntrboothax. Quantumcat meant you can install 3DS ROMs on your 3DS (not the flashcard) after following 3ds.guide. She was also confirming what card you should use for the process. It does not run 3DS ROMs.
 
Last edited by KunoichiZ,
  • Like
Reactions: Quantumcat

Myobi

Active Member
Newcomer
Joined
Nov 28, 2013
Messages
41
Trophies
0
XP
148
Country
Yeah, I completely misunderstood him then =S

Well, it still works out in the end, that’s what really matters! =P

Though if that’s it’s only function, then I guess the 62Gb micro SD I got for the cartridge is pretty useless, no? I mean, since the DS can only take one up to 32Gb.
 

Quantumcat

Dead and alive
Member
Joined
Nov 23, 2014
Messages
15,144
Trophies
0
Location
Canberra, Australia
Website
boot9strap.com
XP
11,119
Country
Australia
Yeah, I completely misunderstood him then =S

Well, it still works out in the end, that’s what really matters! =P

Though if that’s it’s only function, then I guess the 62Gb micro SD I got for the cartridge is pretty useless, no? I mean, since the DS can only take one up to 32Gb.
If you format it as FAT32 it will work. You'll need to use a program for it as Windows can't do it on its own. Eg GuiFormat.
 
  • Like
Reactions: KunoichiZ

Prior22

Well-Known Member
Member
Joined
Sep 23, 2010
Messages
933
Trophies
1
XP
2,953
Country
United States
Is the 3DS capable of running a DS emulator with a high compatibility rate? Or should I just stick with playing them via the Gateway blue card? Also whats the easiest possible way to convert 3ds files into CIA format? Thanks.
 
Last edited by Prior22,

Uumas

Well-Known Member
Member
Joined
Sep 17, 2016
Messages
2,004
Trophies
0
Age
22
XP
1,157
Country
Finland
Is the 3DS capable of running a DS emulator with a high compatibility rate? Or should I just stick with playing them via the Gateway blue card? Also whats the easiest possible way to convert 3ds files into CIA format? Thanks.
Ds emulators, no, but but there's TWLoader, which can run many games, but definitely not close to all. The gateway blue is probably your best option.
For converting 3ds to cia: https://3ds.guide/godmode9-usage#converting-a-3ds-to-cia
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    Psionic Roshambo @ Psionic Roshambo: @BigOnYa, FarCry 5 is an awesome game with multiple endings!