Hacking Luma3DS - Noob-proof 3DS Custom Firmware

[astronautlevel]

Can I use the eShop with Luma3DS?

Yes.

 

[MegAmi24]

Yes.

Cool! Thanks for answering (and especially within like 10 seconds), my friend helped me install Luma3DS and didn't know himself lol

 

[Naked_Snake]

What is this lol

 

[Localhorst86]

What is this lol

looks like you installed the dev version. try the regular version.

 

[Xenosaiga]

What is this lol

If you do not know what this is then apparently you are using the Dev version of Luma when you should not be. Replace your version with the standard Non Dev edition.

 

[Naked_Snake]

Yeah I saw it was an unstable version in GitHub just now lol I'll go the standard version I was just playing with CTRAging is all

 

[Hammyface]

OK unfortunately I think LumaUpdater somehow screwed up my MicroSD card. I am not sure how, but here is what happened.

I was on Luma 5.4 without issue. I periodically check LumaUpdater, and I noticed 5.5 came out so I updated it. Rebooted and I got a black screen. This is weird because this never happened before.

I tried to put the MicroSD card into my PC and it will not read it. It shows up as unreadable. I cannot even format it in Windows disk formatting tools. It is not my SD card reader because I tried 5 different readers and 2 different computers.

I held the Y button to enter EmuNAND9 and it says "EmuNAND: SD not ready" even though the microSD card is in there. Interestingly, right below that it says SD Storage: 36046MB / 60894 MB so it is acknowledging the card is there.

What the heck happened? Could LumaUpdater seriously have screwed up my card this badly? Am I really going to lose all the work I put into this thing for the past 2 months or so? Please if anyone has any idea of what I can do, let me know. I really hope LumaUpdater didn't destroy my emuNAND partition somehow

 

[Deleted User]

Great CFW except I have one problem:

When I try to activate the "Enable developer features" nothing happens. I have downgraded with the dev nand pack, have test menu and debug mode enabled in the Config app, but when I activate this, I cannot even get into the home menu without test menu and debug mode enabled :/

--------------------- MERGED ---------------------------

OK unfortunately I think LumaUpdater somehow screwed up my MicroSD card. I am not sure how, but here is what happened.

I was on Luma 5.4 without issue. I periodically check LumaUpdater, and I noticed 5.5 came out so I updated it. Rebooted and I got a black screen. This is weird because this never happened before.

I tried to put the MicroSD card into my PC and it will not read it. It shows up as unreadable. I cannot even format it in Windows disk formatting tools. It is not my SD card reader because I tried 5 different readers and 2 different computers.

I held the Y button to enter EmuNAND9 and it says "EmuNAND: SD not ready" even though the microSD card is in there. Interestingly, right below that it says SD Storage: 36046MB / 60894 MB so it is acknowledging the card is there.

What the heck happened? Could LumaUpdater seriously have screwed up my card this badly? Am I really going to lose all the work I put into this thing for the past 2 months or so? Please if anyone has any idea of what I can do, let me know. I really hope LumaUpdater didn't destroy my emuNAND partition somehow

Do you have write protection enabled (SD card lock on the side)

 

[Hammyface]

Do you have write protection enabled (SD card lock on the side)

Nope. It has nothing to do with write protection. It's a microSD card and I also tried a microUSB to USB adapter I have and that isn't reading anything either. I tried it on several PCs. And other microSD cards work on it.

What could LumaUpdater have done to my card?

 

[izy]

Great CFW except I have one problem:

When I try to activate the "Enable developer features" nothing happens. I have downgraded with the dev nand pack, have test menu and debug mode enabled in the Config app, but when I activate this, I cannot even get into the home menu without test menu and debug mode enabled :/

Its because you need a decrypted Bootrom or it doesn't work

 

[proflayton123]

Its because you need a decrypted Bootrom or it doesn't work

And I don't youll be getting that anytime soon

 

[Localhorst86]

Nope. It has nothing to do with write protection. It's a microSD card and I also tried a microUSB to USB adapter I have and that isn't reading anything either. I tried it on several PCs. And other microSD cards work on it.

What could LumaUpdater have done to my card?

Does it show up in the storage manager of the computer management tool? If not the SD card just died and it is - most likely - just coincidence and not star updater's fault.

Gesendet von meinem Elephone P6000 mit Tapatalk

 

[Hammyface]

Does it show up in the storage manager of the computer management tool? If not the SD card just died and it is - most likely - just coincidence and not star updater's fault.

It shows up as G: but it says "No media".

I would think the card fried too, but it's a genuine SanDisk and only a few months old which makes it kind of unlikely; also the fact that it was working fine until I restarted after updating Luma. Also a reason I think it might not be "dead" is that I can read the available storage space in EmuNAND9. Help!

 

[Localhorst86]

It shows up as G: but it says "No media".

I would think the card fried too, but it's a genuine SanDisk and only a few months old which makes it kind of unlikely; also the fact that it was working fine until I restarted after updating Luma. Also a reason I think it might not be "dead" is that I can read the available storage space in EmuNAND9. Help!

Again, does it show up in computer management under storage management? Go to control panel - > administrative tools - > computer management - > storage manager. Check if it shows up with Any partitions.

Gesendet von meinem Elephone P6000 mit Tapatalk

 

[Hammyface]

Again, does it show up in computer management under storage management? Go to control panel - > administrative tools - > computer management - > storage manager. Check if it shows up with Any partitions.

It does show up as G:. But it says "No Media". So it has a drive letter, but that is about it.

 

[Localhorst86]

It does show up as G:. But it says "No Media". So it has a drive letter, but that is about it.

Yeah, I think this one is beyond repair. Since you said it's only a few months old, maybe you can get a new one under warranty.

Gesendet von meinem Elephone P6000 mit Tapatalk

 

[Redirr]

Hello There.
I have a original cart. I just want to extract it's save and inject to a .3ds game not .cia game.

I tried to google it but find nothing could help me.

It's simple : I need to use "save" with a .3ds game with SKY3DS PLUS.

 

[Shadow#1]

Hello There.
I have a original cart. I just want to extract it's save and inject to a .3ds game not .cia game.

I tried to google it but find nothing could help me.

It's simple : I need to use "save" with a .3ds game with SKY3DS PLUS.

This thread is about help on Luma3DS not sky3ds kthx

Sent from my LG-D851 using Tapatalk

 

[Redirr]

This thread is about help on Luma3DS not sky3ds kthx

Sorry i forgot to say it's to downgrade a NEW 3DS friend. To setup Luma3DS CFW

I was planing to launch OOTHAX from SKY3DS+ from another friend.

But i find better solution using Ninjahax. I hope it's works.

 

[yakuma]

hi.
can anyone tell nhow to use cosmo cxi file eith aureinand.
i want use my eshop on region change.
i try with cosmo and it work.

thanks