UPDATES:
R4i cards with this icon do not need to update:
Source: http://r4ids.cn/news.htm
The newest update (6.1.0-X) does not block R4is (or DSTWOs) that have been patched for 6.0.0-X. I can confirm this because my R4i Gold 3DS RTS still works on my 6.1.0-11U 3DS. To see confirmation about the DSTWO, read the bottom of this post.
The R4ids.cn team have also confirmed that it works:
http://r4ids.cn/news.htm
__________________________________________________________________________________________________________________________
The new patch for R4i Golds to work on 3DS 6.0 firmware has been released.
http://r4ids.cn/news.htm
Direct download links:
Wood 1.60: ftp://r4idsdown:[email protected]/Wood_R4iGold_V1.60.rar
R4i Gold update for 6.0 3DS: ftp://r4idsdown:[email protected]/R4ids6.0Patch.rar
(brief) Directions:
1. Download Wood 1.60 and put its contents on the root of your MicroSD Card, even if you've already updated to 1.60 (link above)
2. Download the update patch for 3DS 6.0 and place the folder on your MicroSD card (link above).
3. Run the "R4iGold_3DS60_Patch_NDSi_3DS.nds" file on your flashcard.
4. After the update is fully done, turn off your (3)DS system and remove the flashcard. Open the flash card and cut the signal line as instructed in the readme file that came with the update patch.
5. Now you can update your 3DS to 6.0
A screenshot of what your MicroSD Card should look like after applying the correct files on the card:
Also, the DSTWO has been updated for 6.0.0-X (which also works on 6.1.0-X) :
R4i cards with this icon do not need to update:
Source: http://r4ids.cn/news.htm
- Our new R4i Gold 3DS card support 3DS 6.0.0-X directly without patch updating since today !(2013-06-25)
Please note: Our new card(shipped out after June 25th) comes with "konami" () directly don't need to do the patch updating and PCB line cutting, which can support 3DS V6.0.0-X directly...
You can check the supported version info within the newest Wood V1.60 menu(need to re-download).....if it's 3DS6.0.0-11 & DSi1.45, then don't need to do patch upddating...
The newest update (6.1.0-X) does not block R4is (or DSTWOs) that have been patched for 6.0.0-X. I can confirm this because my R4i Gold 3DS RTS still works on my 6.1.0-11U 3DS. To see confirmation about the DSTWO, read the bottom of this post.
The R4ids.cn team have also confirmed that it works:
http://r4ids.cn/news.htm
R4i Gold 3DS can support the newest 3DS Ver.6.1.0-X directly (as long as your card supported V6.0.0-X before) ! (2013-06-28)
R4i Gold 3DS can support the newest 3DS Ver.6.1.0-X directly! (As long as your card supported directly for V6.0.0-X or update sucessfully by 3DS6.0 patch to support V6.0.0-X)
__________________________________________________________________________________________________________________________
The new patch for R4i Golds to work on 3DS 6.0 firmware has been released.
http://r4ids.cn/news.htm
- The 3DS6.0 updating patch is released now!(2013-06-23)
Note: This patch updating is little different as before, please see the instructions in the "readme.doc" step by step carefully! the key point: doing the patch updating for your card first, then cut off the signal line(on the PCB) by a knife as required on the picture... (Don't cut the line before the patch updating done successfully!!!)
[Download Now]
[Youtube Video] R4i Gold 3DS Update Instructions For 3DS 6.0.0-X, please follow here http://www.youtube.com/watch?v=tLJ3uNgggNI
Direct download links:
Wood 1.60: ftp://r4idsdown:[email protected]/Wood_R4iGold_V1.60.rar
R4i Gold update for 6.0 3DS: ftp://r4idsdown:[email protected]/R4ids6.0Patch.rar
(brief) Directions:
1. Download Wood 1.60 and put its contents on the root of your MicroSD Card, even if you've already updated to 1.60 (link above)
2. Download the update patch for 3DS 6.0 and place the folder on your MicroSD card (link above).
3. Run the "R4iGold_3DS60_Patch_NDSi_3DS.nds" file on your flashcard.
4. After the update is fully done, turn off your (3)DS system and remove the flashcard. Open the flash card and cut the signal line as instructed in the readme file that came with the update patch.
5. Now you can update your 3DS to 6.0
A screenshot of what your MicroSD Card should look like after applying the correct files on the card:
Also, the DSTWO has been updated for 6.0.0-X (which also works on 6.1.0-X) :
Seems Supercard team updated their firmware of DsTwo (1.20) to support 6.0
http://forum.supercard.sc/thread-9465-1-1.html
Edit: Tested and working perfectly! Have fun people!!!!
Yes. I can confirm that the SuperCard DSTwo running 1.20 firmware works fine with US 3DS Firmware 6.1.0-11U it is not blocked. Any other reports on the web are incorrect.
At least in 'murica, we got a 6.1.0-11U update. My DStwo isnt blocked
Try on my 3DS FW 6.1.0-11U set. R4i gold 3DS (6.0.0-11 patched) cart working well. DsTwo (6.0.0-11 patched) cart also working well
updated 3ds to 6.1.0.11U supercard DSTWO still working!