1. KuranKu

    OP KuranKu I am KranK
    Developer

    Joined:
    Jan 13, 2019
    Messages:
    369
    Country:
    Israel
    Hey guys and sys-ftpd users, as you were aware sys-ftpd module used no Credentials for the login session and had pre-configured Port to 5000, well this is no longer the case, cause i have dealt with that :).

    in this release you will have:

    1. Full Login Credentials control from the "/ftpd/config.ini" file with secured connection aswell.
    2. Ability to choose between Anonymous or Login Credentials session from the "/ftpd/config.ini" file.
    3. Now your can choose your desided Port of the FTP server from the "/ftpd/config.ini" file.
    you can get the updated version of the sys-ftpd from my or jakibaki's repo as its were pulled by jakibaki and its an official release, links below.
    https://github.com/KranKRival/sys-ftpd
    https://github.com/jakibaki/sys-ftpd

    you can compile your own build :arrow:
    or you can get latest auto build from Lavatech: https://bsnx.lavatech.top/sys-ftpd/ :download:

    Credits:
    Me: for this fancy update
    jakibaki: for sys-ftpd module for the switch
    p-sam: for Credentials security methode

    Hope you guys enjoy this release :grog:
     
    Last edited by KuranKu, Mar 24, 2019
    Tyvar1, satan89, dcnigma and 8 others like this.
  2. shado9573

    shado9573 GBAtemp Regular
    Member

    Joined:
    May 25, 2017
    Messages:
    251
    Country:
    Pakistan
    Do I replace it in the same folder?
    Great work btw keep it up.
     
  3. gnmmarechal

    gnmmarechal GBAtemp Guru
    Member

    Joined:
    Jul 13, 2014
    Messages:
    5,784
    Country:
    Portugal
    Hmm, this is a useful addition, nice!
     
  4. KuranKu

    OP KuranKu I am KranK
    Developer

    Joined:
    Jan 13, 2019
    Messages:
    369
    Country:
    Israel
    all stayed the same , must read README.md and compile your build :)
     
    iriez likes this.
  5. KiwiDude

    KiwiDude Newbie
    Newcomer

    Joined:
    Mar 23, 2019
    Messages:
    5
    Country:
    Germany
    I have no idea what this is, but I'm still excited because it has SO MANY COLORS
     
  6. hippy dave

    hippy dave BBMB
    Member

    Joined:
    Apr 30, 2012
    Messages:
    5,947
    Country:
    United Kingdom
    Thanks, I just built and replaced my old version, but got a freeze on black screen after atmosphere splashscreen, any ideas where I went wrong? Doing "make" didn't build a kip, so I had to run elf2kip manually - it said "Using deprecated kernel_capabilities format. Please turn it into an array." but ran anyway.
     
  7. ZachyCatGames

    ZachyCatGames GBAtemp Addict
    Member

    Joined:
    Jun 19, 2018
    Messages:
    2,782
    Country:
    United States
    It's not a kip anymore. It's in the boot2.flag nsp format now
     
  8. hippy dave

    hippy dave BBMB
    Member

    Joined:
    Apr 30, 2012
    Messages:
    5,947
    Country:
    United Kingdom
    Thanks, yeah I just wondered that after I posted. Oh for just a smidgeon more documentation.
     
  9. DrNeroCF

    DrNeroCF Advanced Member
    Newcomer

    Joined:
    Oct 12, 2016
    Messages:
    96
    Country:
    United States
    Main question, though, is this any faster?
     
  10. iriez

    iriez GBAtemp Advanced Fan
    Member

    Joined:
    Oct 27, 2016
    Messages:
    532
    Country:
    United States
    I've put a pre-compiled "drag and drop" (extract to sd) version on xbins in /SWITCH/Switch based software/Networking/ftpd-auth

    Thanks KuranKu!

    btw if you add this file to your github releases page it will make it much easier for everyone to get :)
     
    Last edited by iriez, Mar 23, 2019
    hippy dave likes this.
  11. KuranKu

    OP KuranKu I am KranK
    Developer

    Joined:
    Jan 13, 2019
    Messages:
    369
    Country:
    Israel
    the black screen issue caused by over Heap from Show Atmosphere version module i guess try Removing 0100000000000032 directory from atmosphere titles, it wont break anything but just you dont have atmosphere version is settings, just as do i , but anyway ill segest you run it as boot2 system module instead of kip , but what i said to do will fix the black screen overheap on boot.
     
  12. hippy dave

    hippy dave BBMB
    Member

    Joined:
    Apr 30, 2012
    Messages:
    5,947
    Country:
    United Kingdom
    Thanks, but now I've switched to boot2 it's all working fine with the atmos version module still installed B-)
    And now I've finally got a build with updated libnx, it shows file modification dates in ftp too!
    Thanks to you and jakibaki, great work!
     
  13. KuranKu

    OP KuranKu I am KranK
    Developer

    Joined:
    Jan 13, 2019
    Messages:
    369
    Country:
    Israel
    yes it is, works for me with it aswell but i just save heeap cause i need some extra:P , so i segested you this to insure thats not the issue , but yes boot2 is so much better than kip by all means
    well any kip module out there is rewitble into boot2 with little afford just like me and Analogman did with noexes debugger :P
     
    hippy dave likes this.
  14. KuranKu

    OP KuranKu I am KranK
    Developer

    Joined:
    Jan 13, 2019
    Messages:
    369
    Country:
    Israel
    i have updated my repo with new version that now supports defining port in the config.ini :P take a look if you interested
     
    hippy dave likes this.
  15. iriez

    iriez GBAtemp Advanced Fan
    Member

    Joined:
    Oct 27, 2016
    Messages:
    532
    Country:
    United States
    I've updated the file on xbins to reflect these changes.
     
    okbyenow likes this.
  16. sj33

    sj33 GBAtemp Psycho!
    Member

    Joined:
    Oct 22, 2013
    Messages:
    4,036
    Country:
    Japan
    survive9, hippy dave, KuranKu and 2 others like this.
  17. KuranKu

    OP KuranKu I am KranK
    Developer

    Joined:
    Jan 13, 2019
    Messages:
    369
    Country:
    Israel
    new version commits on my github
    including port configuration from the config.ini
    soon will be also merged with the main repo as soon as Jakibaki has a chace to look
    for now you can compile last version from my repo only until furder notice :)
     
    hippy dave likes this.
  18. KuranKu

    OP KuranKu I am KranK
    Developer

    Joined:
    Jan 13, 2019
    Messages:
    369
    Country:
    Israel
    Update !!!

    in this release you will have:

    1. Full Login Credentials control from the "/ftpd/config.ini" file with secured connection aswell.
    2. Ability to choose between Anonymous or Login Credentials session from the "/ftpd/config.ini" file.
    3. Now your can choose your desided Port of the FTP server from the "/ftpd/config.ini" file.
    you can get the updated version of the sys-ftpd from my or jakibaki's repo as its were pulled by jakibaki and its an official release, links below.
    https://github.com/KranKRival/sys-ftpd
    https://github.com/jakibaki/sys-ftpd

    you can compile your own build :arrow:
    or you can get latest auto build from Lavatech: https://bsnx.lavatech.top/sys-ftpd/ :download:
     
    Last edited by KuranKu, Mar 24, 2019
    hippy dave and peteruk like this.
  19. peteruk

    peteruk GBAtemp Addict
    Member

    Joined:
    Jun 26, 2015
    Messages:
    2,447
    Country:
    United Kingdom
    thank you for these releases they're very useful, the thread looks great but I'm struggling to read some of the thing's you're posting especially in the yellow and green colored texts. It looks smart and all but hard to read, for me anyway.

    Thank you for a great app.
     
    kop365, Citrus-Hombre and KuranKu like this.
  20. Idontknowwhattoputhere

    Member

    Joined:
    Jan 19, 2019
    Messages:
    759
    Country:
    United Kingdom
    Why dont you create a bot that scrapes the release on github for xbins?
     
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - Official, Support, Release