Hacking Discussion sx pro and nintendo device battery

  • Thread starter Thread starter Omer
  • Start date Start date
  • Views Views 2,503
  • Replies Replies 15

Omer

Well-Known Member
Member
Joined
May 13, 2014
Messages
264
Reaction score
26
Trophies
1
Age
41
XP
891
Country
I bought sx pro this week and its working ok but I noticed something strange. When I powered off my device and then start it up in the other day I noticed the following
1- the nintendo device is hot as if it was on all night .
2- the battery is depleted ( if it was 70 % at night , the other day morning is about 20 or even less)
That was not happening to my device before buying the sx pro.
And before anyone say that you might not powered it off or it was in sleep mode , I'm very sure the device was off and not in sleep mode
Does anyone had the same problem with sx pro ?
 
It's a known side effect of having autorcm installed. The only way of completely powering off the console with autorcm installed is by holding the power button for like 12 seconds. Using the power off option will not fully power it off.
 
Last edited by JJTapia19,
  • Like
Reactions: Omer
It's a known side effect of having autorcm installed. The only way of completely powering of the console with autorcm installed is by holding the power for like 12 seconds. Using the power of option will not fully power it off.
Thanks for the answer . I will try to do that
 
  • Like
Reactions: JJTapia19
It's a known side effect of having autorcm installed. The only way of completely powering off the console with autorcm installed is by holding the power button for like 12 seconds. Using the power off option will not fully power it off.
I tried to push the power button for 10 seconds and device was off and then again when I start it on after few hours the device was hot and the battery was depleted about 20 %
 
I tried to push the power button for 10 seconds and device was off and then again when I start it on after few hours the device was hot and the battery was depleted about 20 %
Hmm that's not normal at all. I can only recommend to try to stay on sleepmode as much as you can. The sleep mode is great on battery and doesn't use much. Also You have the option of uninstalling auto rcm on the sx menu.
 
Uninstall AutoRCM and just use sleep mode, My switch stays on the dock 95% of the time, i only have to crack out the jig and dongle if i have to power down to remove the SD card for any reason :)
 
It's because you have enabled auto rcm, when you turn the switch off with this enabled, the switch isn't really off - it's constantly trying to boot into recovery, if you have that enabled, just put the switch into standby mode instead and then the battery won't deplete as much, due to not trying to constantly boot into recovery.
 

Site & Scene News

Popular threads in this forum