Hacking Switch blue screen

[blady83]

Greetings guys, I received a switch that turns on blue screen, I would like to know if it can be solved and if so, what would be the solution. Thank you

 

[ZachyCatGames]

You might be able to fix it by manually reinstalling the firmware
https://gbatemp.net/threads/how-to-...nofficially-without-burning-any-fuses.507461/

 

[Mr. Wizard]

This has been covered in a thread somewhere if you are willing to search.

 

[Thatcher]

The Switch displays a panic code (Colour) when it detects an issue. Depending on the shade of blue this could be a few different errors but you can check them out on http://switchbrew.org/index.php?title=Panic_codes

 

[Kukielka]

Inb4: He tried that "cracked" sxos payload that was published like 3 weeks ago.
Inb4: He didn't make a Nand Backup.

 

[Creatable]

Inb4: He tried that "cracked" sxos payload that was published like 3 weeks ago.
Inb4: He didn't make a Nand Backup.

If you read the thread you'd know he didn't do anything to brick it, and he bought it broken.
Also, that payload (PozzNX) does not cause kernel panic codes. It makes your switch freeze at the Switch logo and reboots when you press power unless you hold power.

 

[Thatcher]

Can you launch payloads like Hekate for example? If so and you have a NAND backup you probably get it working unless it's a hardware issue.

 

[Kukielka]

If you read the thread you'd know he didn't do anything to brick it, and he bought it broken.
Also, that payload (PozzNX) does not cause kernel panic codes. It makes your switch freeze at the Switch logo and reboots when you press power unless you hold power.

There have been enough cases of kernel panics due to Pozz, look it up.
And what someone says and what someone does are 2 different things. I mean.... look here, it's hilarious
https://gbatemp.net/threads/switch-stuck-in-nintendo-logo.515784/

--------------------- MERGED ---------------------------

The problem is that when powered on, it shows the nintendo logo for a few seconds and then it turns off.

HMMM WHAT HAPPENED THERE HUH?

 

[blady83]

thanks for the answers, the console presented the flaw playing, the person told me that the image was frozen and when I turned it on again I presented the blue screen, the console was not hacked, this original one, I tried the solutions that I have proposed and I will go commenting on progress thank you very much

 

[suzsuzuki]

You might be able to fix it by manually reinstalling the firmware
https://gbatemp.net/threads/how-to-...nofficially-without-burning-any-fuses.507461/

No man... why to use this looong tutorial if we have now choidujournx:


https://gbatemp.net/threads/choiduj...ller-homebrew-for-the-nintendo-switch.513416/

Much easier

 

[ZachyCatGames]

No man... why to use this looong tutorial if we have now choidujournx:


https://gbatemp.net/threads/choiduj...ller-homebrew-for-the-nintendo-switch.513416/

Much easier

It’s kind of hard to run homebrew for Horizon if they can’t even boot into Horizon

 

[ressit]

I have same erro

 

[blady83]

greetings guys, I inform you of my progress, I managed to make a backup of the whole system with HacDiskMount and with hekate and I want to try to solve the problem with this tutorial https://gbatemp.net/threads/how-to-install-run- any-switch-firmware-unofficially-without-burning-any-fuses.507461 /, but I have not managed to do it since it is very complicated, I wanted to know if someone has followed and can help me out thanks.

 

[ressit]

I followed instructions from raj but i think i ruined profile0

 

[ressit]

now i can backup all file i have
it all right
but all i can see
blueeeeee

 

[ressit]

greetings guys, I inform you of my progress, I managed to make a backup of the whole system with HacDiskMount and with hekate and I want to try to solve the problem with this tutorial https://gbatemp.net/threads/how-to-install-run- any-switch-firmware-unofficially-without-burning-any-fuses.507461 /, but I have not managed to do it since it is very complicated, I wanted to know if someone has followed and can help me out thanks.

1.restore nintendo SW :
- boot0/1
- raw.bin
2
== STEP BY STEP ==

How to solve this problem (stuck on the nintendo switch logo screen)
1- First, turn on the Nintendo Switch and wait for it to freeze on the Nintendo Switch logo screen
2- Wait for 8 hours (estimated time) until to discharge the battery.
3- Put the Nintendo Switch in the dockstation and wait for 20 minutes.
4- After 20 minutes, remove the Nintendo Switch from the dockstation and check the charging. At that point, in my case, when I removed my Nintendo Switch, it was on the main screen. So, I didn't need to turn on the Nintendo Switch, it unlocked itself and went back to working as if nothing had happened.
5- Wait to complete the recharge.