Please help : black screen on disc channel.

Discussion in 'Wii - Hacking' started by karl1295, Mar 15, 2011.

Mar 15, 2011
  1. karl1295
    OP

    Member karl1295 GBAtemp Regular

    Joined:
    Dec 14, 2008
    Messages:
    168
    Country:
    United States
    well , if I launch newer game from disc channel I get black screen and says please eject and turn off. 4.2E wii. How can i get rid of it?
     


  2. Hells Guardian

    Member Hells Guardian GBAtemp Maniac

    Joined:
    Dec 25, 2008
    Messages:
    1,113
    Country:
    United States
    disc read error.... are all your IOS up to date? do they work through loaders like Gecko OS?
     
  3. ground

    Member ground GBAtemp Advanced Fan

    Joined:
    Mar 22, 2007
    Messages:
    906
    Country:
    Netherlands
    can you tell us the condition of your wii?
    is it softmodded, or maybe hardmodded?
    which IOS do you have?
    are it retail games or burned games?
     
  4. karl1295
    OP

    Member karl1295 GBAtemp Regular

    Joined:
    Dec 14, 2008
    Messages:
    168
    Country:
    United States
    the IOS's maybe old , i recently putted ios-56-64-v5662 and shop channel v20 . I have softmod and always have launched games from disc channel.

    Posts merged

    PS: I CAN LAUNCH GAMES FROM LOADER , but still what should i try ? do ?
     
  5. Hells Guardian

    Member Hells Guardian GBAtemp Maniac

    Joined:
    Dec 25, 2008
    Messages:
    1,113
    Country:
    United States
    use moddmii wizard to walk you through the proccess of updating all your IOS via wad and see if that helps. The fact that a loader works means it's most likely IOS because the loaders usually force a certain IOS. Gecko doesn't but many do. Best of luck to you.
     
  6. karl1295
    OP

    Member karl1295 GBAtemp Regular

    Joined:
    Dec 14, 2008
    Messages:
    168
    Country:
    United States
    can i have link please?
     
  7. bazamuffin

    Member bazamuffin RESIDENT DILF

    Joined:
    Feb 1, 2009
    Messages:
    2,036
    Location:
    Shmashmortion Clinic
    Country:
    United Kingdom
    check the stickies!!
     
  8. karl1295
    OP

    Member karl1295 GBAtemp Regular

    Joined:
    Dec 14, 2008
    Messages:
    168
    Country:
    United States
    okay , but now how i know which ios's imma need?
     
  9. robbywu

    Newcomer robbywu Advanced Member

    Joined:
    Sep 10, 2010
    Messages:
    86
    Location:
    Ohio
    Country:
    United States

    modmii sticky
     
  10. karl1295
    OP

    Member karl1295 GBAtemp Regular

    Joined:
    Dec 14, 2008
    Messages:
    168
    Country:
    United States
    I don't know what or which to download :S ?
     
  11. bazamuffin

    Member bazamuffin RESIDENT DILF

    Joined:
    Feb 1, 2009
    Messages:
    2,036
    Location:
    Shmashmortion Clinic
    Country:
    United Kingdom
  12. karl1295
    OP

    Member karl1295 GBAtemp Regular

    Joined:
    Dec 14, 2008
    Messages:
    168
    Country:
    United States
    I have already done hacking , i can play games, but now they freeze tho and wont launch Do i like press E and I ?
     
  13. Hells Guardian

    Member Hells Guardian GBAtemp Maniac

    Joined:
    Dec 25, 2008
    Messages:
    1,113
    Country:
    United States
    Dude the modmii app will install and from there tell you exactly what to do. If you can't figure it out I highly advise you never attempt to use a computer again.


    What Operating system do you use?

    Once you determine that download the version for that. We are talking basic computer stuff dude. once downloaded install. Once done open modmii and just follow the onscreen instructions.
     
  14. karl1295
    OP

    Member karl1295 GBAtemp Regular

    Joined:
    Dec 14, 2008
    Messages:
    168
    Country:
    United States
    So ur saying i should remod ?
     
  15. bazamuffin

    Member bazamuffin RESIDENT DILF

    Joined:
    Feb 1, 2009
    Messages:
    2,036
    Location:
    Shmashmortion Clinic
    Country:
    United Kingdom
    I Agree. Modmii guides you through and it downloads for you. If thats too complex, put the wii down and walk away
     
  16. Hells Guardian

    Member Hells Guardian GBAtemp Maniac

    Joined:
    Dec 25, 2008
    Messages:
    1,113
    Country:
    United States
    reread my post I edited it. I'm not saying remod. I'm saying update your system software.
     
  17. karl1295
    OP

    Member karl1295 GBAtemp Regular

    Joined:
    Dec 14, 2008
    Messages:
    168
    Country:
    United States
    should i keep it to 4.2 or should i move it to 4.3 ?
     
  18. Taleweaver

    Member Taleweaver Storywriter

    Joined:
    Dec 23, 2009
    Messages:
    5,121
    Location:
    Belgium
    Country:
    Belgium
    Dude...seriously: read the stickies. And by that, I mean READ. Not 'glance for 2 seconds, then go back to crying for help'. We're here to help, but not to guide your finger through even the simplest of things.


    In short: Yes, remod. No, you'll be fine on 4.2.
     
  19. karl1295
    OP

    Member karl1295 GBAtemp Regular

    Joined:
    Dec 14, 2008
    Messages:
    168
    Country:
    United States
    okay... did what the installer said , but still black screen and says eject and restart , but the installer file which i got looks like this
    . PS I DID SAME AS IT SAID
    This Guide was generated using the following parameters:

    * Wii is already modified
    * Current firmware is 4.2E
    * Desired firmware is 4.2E


    * Download HackMii Installer and BannerBomb v2 (with IOS58)
    * Download recommended cIOSs and cMIOS
    * Download Yet Another Wad Manager Mod (YAWMM)
    * Download IOS236 Installer and Simple IOS Patcher (with IOS36v3351)?
    * Download Priiloader
    * Download Extra Brick Protection
    * Update active IOSs



    This software is not for sale. If you paid for this software or a "bundle" you have been scammed.

    THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY, NEITHER STATED NOR IMPLIED.
    NO ONE BUT YOURSELF IS TO BE HELD RESPONSIBLE FOR ANY DAMAGE THIS MAY CAUSE TO YOUR NINTENDO WII CONSOLE!
    USE THIS AT YOUR OWN RISK!



    IMPORTANT NOTES:

    *This guide does NOT require a Wifi connection on your Wii.
    *An SD card formatted to FAT(32) required (Best results are with non-SDHC cards, SDHC will only work on 4.0 or above).
    *If you get errors during any of the steps reformat your SD card as FAT or FAT32
    *Turn off WiiConnect24 and take out all gamecube memory cards/controllers when modding the Wii (unless instructed otherwise).
    *If your Wii ever freezes, hold the power button on the Wii for 5 seconds to power it off then try again.
    *Don’t ever accept a new Nintendo update without first googling to see if it’s safe. The last update (to 4.3) was released in late June 2010 and is NOT safe to accept. If you accept an official Nintendo update after modding the Wii, you may lose some or all of your modifications.
    *Never uninstall a system menu or IOS
    *Do not install untested wads/themes without Bootmii or Priiloader installed.
    *This custom guide is great start, but Wii modding is always evolving. Check for updates online, and remember, google is your friend.
    *If you have questions, a more detailed guide can be found here: www.sites.google.com/site/completesg/




    1) INSTALLING THE HOMEBREW CHANNEL (HBC) AND BOOTMII
    =================================================



    Run BannerBomb v2 by selecting the SD Card Button on the main system menu screen and choosing yes to load boot.dol/elf
    Note: If it doesn't work for you, visit <a href="http://bannerbomb.qoid.us/" target="_blank">http://bannerbomb.qoid.us/</a> for more variations of either version of bannerbomb.



    This runs the Hackmii Installer (and silently/automatically installs BootMii as IOS). Use the installer to install the Homebrew Channel (HBC) and Bootmii as Boot2 if possible. If you cannot install BootMii as Boot2, you also need to 'prepare an SD Card' for BootMii (as the 'BootMii' folder is required to launch BootMii as IOS or Boot2).

    Note: If you get a 'no vulnerable IOS' error message, run ModMii again and this time select the 'Hackmii Solutions' option instead of 'ModMii Wizard' and follow the new instructions before continuing this guide.

    After you exit the hackmii installer, you will be taken to the HBC.
    Hit the home button. In the top right corner you will see the IOS used by the HBC.

    If the HBC is using an IOS other than IOS58 or your homebrew channel is upside-down, make a note of it as it applies later in the guide (you will have to reinstall the HBC).

    If it is using IOS58 and your HBC is not upside-down, you can skip the Reinstall The Homebrew Channel step when you get to it.




    2) MAKING A NAND BACKUP
    ====================

    While inside the Homebrew Channel, load BootMii by pressing home and clicking Launch Bootmii.
    Press the power button on the wii 3 times to get to the last option, then press the reset button. [You can also navigate with a Gamecube controller]

    Press reset to choose the first option, then follow the directions on the screen to make your NAND backup. [Bad blocks are no problem.]

    Backup the Bootmii folder, NAND.bin, and keys.bin elsewhere and erase from the sd card (or rename it). You'll need these in case of emergencies, so don't lose them.
    Go back to The Homebrew Channel.

    Note: if Bootmii was installed as boot2, then it will show up as soon as the Wii is turned on AS LONG AS it finds the bootmii folder (mentioned above) on the root of the SD card.




    3) INSTALL A PATCHED IOS236
    ========================

    Start the Homebrew Channel.

    VERY IMPORTANT!
    In the Homebrew channel, if you do not have a working internet connection already set up, you will see an icon flashing in the bottom right corner of the screen indicating its inability to initialize the network. You MUST wait for the icon to stop flashing OR let it flash for 30-60 seconds before proceeding otherwise these apps will error shortly after being launched. If you encounter this harmless error, power off the Wii and repeat this step from the beginning. To increase your chances of success, add a working internet connection to your Wii via the official Wii Settings Menu, but be sure to say "No" when asked to perform an update.


    You only need to perform ONE of the below methods.


    Method A: Using IOS236 Installer
    --------------------------------

    After waiting 30-60 seconds for the HBC to attempt to initialize the network, launch "IOS236 Installer v5 MOD".
    Note: This app must be launched using HBC v1.0.7 or higher in order to work properly.

    It should say "IOS236 installation is complete!" and return to The Homebrew Channel.

    If you experience errors, keep trying and it should eventually work.
    If you continue to experience errors you can try using Simple IOS Patcher instead.
    Once either method successfully installs IOS236, you can move onto the next step.


    Method B: Using Simple IOS Patcher
    ----------------------------------

    After waiting 30-60 seconds for the HBC to attempt to initialize the network, launch "IOS236 Installer".
    Note: This app must be launched using HBC v1.0.7 or higher in order to work properly.

    Choose "IOS36" (already selected by default) and push A,
    Select "Install IOS to slot" and choose 236,
    Select "Install patched IOS36" leaving the 4 patches set to "yes" and press A,
    Choose "Load IOS from SD card".

    Confirm your choice with the A button,
    When prompted, push A to continue the installation.
    When the installation is over you'll be back at the Main Menu,
    Then push B button to exit.

    If you experience errors, keep trying and it should eventually work.
    If you continue to experience errors you can try using IOS236 Installer instead.
    Once either method successfully installs IOS236, you can move onto the next step.




    4) INSTALL PRIILOADER
    ==================

    Launch "Priiloader 236" via the Homebrew Channel

    After the Priiloader Installer loads, press + to install it.

    You may get an error for "loader.ini" and/or "password.txt" simply ignore these.

    After successfully installing Priiloader, access it by powering off the Wii,
    then powering it back on while holding reset until you see the Priiloader menu.

    You should install some system menu hacks now (by going to System Menu hacks option).

    RECOMMENDED HACKS: Block Disc Updates, Block Online Updates, Replace Health Screen, Auto-Press A at Health Screen, Region-Free Everything, remove no copy save file protection, and Move Disc Channel.

    The priiloader menu is white by default, you can change it to black in the Priiloader settings if you prefer.

    One of the special functions of Priiloader is that it can autoboot any app/file instead of the system menu. Some apps (like crazyIntro) can't be used without it.
    For details on how to do so, visit www.sites.google.com/site/completesg/system-hacks/priiloader




    5) INSTALL WADS
    ============

    Load Multi-Mod Manager (MMM) via the HomeBrew Channel.
    If IOS236 is not already loaded, select "Load another IOS", then select IOS236

    Note: If this step fails with error -ret 2011 or other, you may need to retry patching IOS236. If the Wii was previously softmodded, you can try loading cIOS250 (or others like 202,222,223,224,236,249)

    In Multi-Mod Manager's main menu, go down to select "WAD Manager".

    Install the following WADs from the WAD folder (this list of WADs is unique to how you answered the Wizard's questions).

    Be careful not to install any additional wads that may have been previously saved in this folder (they may be safe, but I cannot say for sure).

    Hold + for 2 seconds to select all the WADs in the folder. Then Press A twice to install them all.
    If any files fail to install properly, they will remain marked for installation, so just retry installing those files.


    Your unique list of wads to install are as follows:

    * IOS11v16174(IOS60v6174[FS-ES-NP])
    * IOS20v16174(IOS60v6174[FS-ES-NP])
    * IOS30v16174(IOS60v6174[FS-ES-NP])
    * IOS50v14889(IOS50v4889[FS-ES-NP])
    * IOS60v16174(IOS60v6174[FS-ES-NP])
    * IOS70v16687(IOS70v6687[FS-ES-NP])
    * cIOS202[57]-v5
    * cIOS223[37-38]-v4
    * cIOS222[38]-v5
    * cIOS224[57]-v5
    * cIOS249[56]-v21d2x3
    * cIOS250[57]-v21d2x3
    * RVL-cmios-v4_WiiGator_GCBL_v0.2
    * IOS9-64-v1034
    * IOS12-64-v526
    * IOS13-64-v1032
    * IOS14-64-v1032
    * IOS15-64-v1032
    * IOS17-64-v1032
    * IOS21-64-v1039
    * IOS22-64-v1294
    * IOS28-64-v1807
    * IOS31-64-v3608
    * IOS33-64-v3608
    * IOS34-64-v3608
    * IOS35-64-v3608
    * IOS36-64-v3608
    * IOS37-64-v5663
    * IOS38-64-v4124
    * IOS41-64-v3607
    * IOS43-64-v3607
    * IOS45-64-v3607
    * IOS46-64-v3607
    * IOS48-64-v4124
    * IOS53-64-v5663
    * IOS55-64-v5663
    * IOS56-64-v5662
    * IOS57-64-v5919
    * IOS58-64-v6176
    * IOS61-64-v5662
    * USBLoader(s)-ahbprot58-SD-USB-v9-IDCL
    This is a forwarder channel that will load the first file it finds from the following list:
    SD+USB:\apps\usbloader\boot.dol
    SD+USB:\apps\usbloader\boot.elf
    SD+USB:\apps\usb-loader\boot.dol
    SD+USB:\apps\usb-loader\boot.elf
    SD+USB:\apps\usbloader_cfg\boot.dol
    SD+USB:\apps\usbloader_cfg\boot.elf
    SD+USB:\apps\WiiFlow\boot.dol
    SD+USB:\apps\WiiFlow\boot.elf
    SD+USB:\apps\usbloader_gx\boot.dol
    SD+USB:\apps\usbloader_gx\boot.elf
    Notes: IOS58 is required to launch apps from an SD Card and hard drives formatted as
    FAT32, NTFS, ext2, ext3 and ext4. It also supports meta.xml arguments
    and is able to launch apps with direct hardware access.
    You should always have at least one forwarder channel installed on your Wii,
    that way, in the event of accidental update, you will be able to rehack your Wii without relying on a disc based exploit




    6) REINSTALL THE HOMEBREW CHANNEL (if applicable)
    ==============================================

    Earlier you should have checked what IOS is used by the Homebrew Channel (HBC). If the IOS used by your HBC is IOS58 and your HBC is not upside-down, you can skip this step.

    If the HBC is using an IOS other than IOS58 or your HBC is upside-down, you should reinstall the HBC.

    Launch the HackMii_Installer via the HBC.
    Use the Hackmii Installer to fix/re-install the HBC. Once you've successfully reinstalled the HBC, you can move onto the next step of the guide.

    If the HBC is failing to load the HackMii_Installer (just blackscreens), instead launch the Hackmii Installer using the method described in the First Step
     
  20. Hells Guardian

    Member Hells Guardian GBAtemp Maniac

    Joined:
    Dec 25, 2008
    Messages:
    1,113
    Country:
    United States
    ok did you install the files on the wii with wad manager? did any give an error?
     

Share This Page