Hacking Need help with PS VITA TV

[djricekcn]

I haven't used the PS VITA TV in a while and I forgot how I did this before.

1st is, every time the PS Vita boots / reboots / etc, i need to remove the USB and plug it back in for it to acknowledge it

2nd is, my main purpose is trying to run Adrenaline to play PSX games but i basically can't get it to work because

Boot up PS Vita ==> Mount UMA ==> Mount USB to UX ==> Install Adrenaline ==> Vita needs to reboot per installer's instructions ==> It repeats from the Boot up PS Vita all over, endless loop. I can only get to launch Adrenaline when using VITA TV's internal memory, which is not what i want, i want it to do USB as I have the games on the USB.

 

[Shadow#1]

I haven't used the PS VITA TV in a while and I forgot how I did this before.

1st is, every time the PS Vita boots / reboots / etc, i need to remove the USB and plug it back in for it to acknowledge it

2nd is, my main purpose is trying to run Adrenaline to play PSX games but i basically can't get it to work because

Boot up PS Vita ==> Mount UMA ==> Mount USB to UX ==> Install Adrenaline ==> Vita needs to reboot per installer's instructions ==> It repeats from the Boot up PS Vita all over, endless loop. I can only get to launch Adrenaline when using VITA TV's internal memory, which is not what i want, i want it to do USB as I have the games on the USB.

Get yourself an SD2VITA

 

[djricekcn]

Get yourself an SD2VITA

It appears to be already installed but in having issues

 

[kuwanger]

Are you using usbmc or StorageMgr? I'd definitely recommend the latter as I used to have problems sometimes with USB with very early versions of usbmc and StorageMgr totally replaces the need for separate stuff. As for the SD2Vita suggestion? I can't see a reason why you'd want to use that.

 

[djricekcn]

I'm reading the faq but i'm highly confused with hos to setup storagemgr.

On PSVITA TV, what is the MCD, INT, GCD, UMA suppose to be ?

also, will this fix the part where i have to replug the USB Flash drive in when coming from a boot (turning it on) of PS Vita TV? Right now, I can't mount unless if i deplug and replug the flashdrive in (no matter what flash drive). I can't mount it other wise (it gives me a message in Vitashell to do that)

 

[kuwanger]

Well, from the readme "NOTE: for using USB mass on h-encore, you have to boot PSTV, plug out USB mass, plug in USB mass then launch h-encore.", so it really depends on if you're using h-encore or enso (3.60 or 3.65); personally, I'm on 3.60 enso and don't have to unplug/plug my usb mass storage. As far as what storage_config.txt should contain, I went by what the guide said and it'd worked for me.

 

[djricekcn]

Well, from the readme "NOTE: for using USB mass on h-encore, you have to boot PSTV, plug out USB mass, plug in USB mass then launch h-encore.", so it really depends on if you're using h-encore or enso (3.60 or 3.65); personally, I'm on 3.60 enso and don't have to unplug/plug my usb mass storage. As far as what storage_config.txt should contain, I went by what the guide said and it'd worked for me.

i saw that it doesn't mention on what to write in for storage-config.txt unless if im misunderstanding it, all it says is
Your new storage device is now configured and ready for use at the mount point specified in your storage_config.txt.

i read the text, but dont know what i need to point it too

ADD:
I am on 3.60 and it says Henkaku-10 right next to it, don't knwo if that's hencore or not

 

[kuwanger]

i saw that it doesn't mention on what to write in for storage-config.txt unless if im misunderstanding it, all it says is

Like I said, the guide will tell you in the "What You Need". You probably only need INT=imc0 and UMA=ux0 lines with MCD=uma0 being up to you if you want to use a Sony Memory card.

I am on 3.60 and it says Henkaku-10 right next to it, don't knwo if that's hencore or not

Henkaku is henkaku. H-encore is h-encore. They're separate things. If you have henkaku at boot without having to run a browser exploit or whatever, you have enso henkaku. Either way, you shouldn't have to unplug/plug your usb.

 

[djricekcn]

arg..i can't get this work so i formatted my the Vita TV. now i can't get it to install MolecularShell and can't connect to QCMA so i'm stuck a few steps back now

after few attemps and guessing, i finally got to get henkaku back on its feet and also, now the USB seems to read fine on bootup / wakeup. i didn't really do anything different so probably something with old settings