Yes I am sure because my TV at that time changed to the input automatically, and I did not want to disturb anyoneI wasn't even aware you can set it to only show video on the gamepad and not the TV. Are you sure that's even a thing?
I think then I need to take it to some repair shop I don't have the tools to solder itUDPIH will probably not work in your car, so it's very likely you have to solder. Either defuse or NAND-AID and dumping the eMMC in hardware
You were right, now which option do you recommend, "DEFUSE" or "NAND-AID? Like I said earlier, already got the raspberry pico.UDPIH will probably not work in your car, so it's very likely you have to solder. Either defuse or NAND-AID and dumping the eMMC in hardware
There is a 4:3 white screen with a lot of random pixels on it, the LED turns purple, I tried to do the dump following the menu on several sites to guide me, but it did not work, I will take a phone of the screen later today I missed it last time I tied to do it, I don't know if that matters but the SD Card was an SDHCWhat's on the TV isn't important. Important is, that the led turns purple.
If the fronts are corrupted then the recovery menu won't show on the display, but it will still work
The last time I used was around the end 2018 or may be at the beginning of 2019. Around April or may that year I put it in its box, but I did not play it again (lack of time), it should have installed automatically the latest version at that time.UDPIH will probably not work in your car, so it's very likely you have to solder. Either defuse or NAND-AID and dumping the eMMC in hardware
Post automatically merged:
Do you know when it was last used or what the installed firmware is?
There is a 4:3 white screen with a lot of random pixels on it, the LED turns purple
Alright i will try later today, and send you also the picture of the pixel screen in case neededThat means that UDPIH is working. If you use the recovery linked in any of the tutorials, it should also have a patch which prevents crashing.
I would recommend you first try to install ISFShax.
I am in the ISFShax menu I already Dump SEEPROM & OTP, Dump SLC.RAW and Dump Sys crash logsThat means that UDPIH is working. If you use the recovery linked in any of the tutorials, it should also have a patch which prevents crashing.
I would recommend you first try to install ISFShax.
I tried to download all the plugins again same thing, here are the logs, meanwhile I will try to download the latest iosu versionCan you show the crash log? And also try downloading and copying the ios_plugins again to the SD, maybe one of them got corrupted.
I am not using the same hotspot, I have not the one used beforeAlso make sure all the wireless modules are connected.
Also check if it writes new logs, to make sure we are not just seeing an old unrelated log.
I mean the 3 wireless modules of the Wii U, attached to the Mainboard (BT, 2.4GHz Wifi, 5GHz DRC)I am not using the same hotspot, I have not the one used before
00:00:05:468: FSA: ### DATA CORRUPTION ERROR ###, dev:mlc01, err:-1245211, cmd:25, path:/sys/title/0005001b/10050000/code/app.xml
00:00:05:559: FSA: ### DATA CORRUPTION ERROR ###, dev:mlc01, err:-1245211, cmd:25, path:/sys/title/0005001b/10058000/code/app.xml
Try to boot again, then dump logs again and see if it wrote a new oneHow do I know that?
I have not opened it yetI mean the 3 wireless modules of the Wii U, attached to the Mainboard (BT, 2.4GHz Wifi, 5GHz DRC)
attached the new onesTry to boot again, then dump logs again and see if it wrote a new one
I imagine that I can delete it from back up and restore, at this point it does not matter about the games and files on it, if I am able to make it work again that's fine even if I add a CFW which I believe would be the optionIf I look at the latest log (41.log) I see that it is crashing because of corruption on the mlc
I have not tested this yet, I wan to confirm with you if this is the right OS because my console is USAlso you don't have the lastest OSv10 installed. You can also use JNUS to download the latest OSv10 title 000500101000400A and take the fw.img from that, rename it to ios_orig.img, put it on the SD and chose the minute entry to boot that. Maybe a patch doesn't line up with the old IOSU and causes the illegal instruction crash.
One question can I try this first and then change the destination to an ssd? Or a more robust sd ie an extreme one? Also currently I am only testing with a 64 gb sd so if it works I will update to have an ssd, don't know if it worth it yet...Yeah it crashes because of the MLC error.
So either replace the eMMC, you can ask @V10lator for a NAND-AID or you can use redNAND
SanDisk Max Endurance cards should last longer than your SLC, so live longer than your Wii U, and aren't that expensive.Or a more robust sd ie an extreme one?
SanDisk Max Endurance cards should last longer than your SLC, so live longer than your Wii U, and aren't that expensive.
//EDIT: For switching later: you can either do a raw 1:1 copy to a same size storage medium or reformat on a different size one.