Homebrew Question Need a way to update my sd card!

[MITSMOUTS]

Well i've been banned from online on my nintendo switch,so in order to update i do it by rajkosto method.I updated to 7.0.1 (no exfat).And i rebooted the system and now when i go into my cfw it says i need to update my sd card but i've been banned so i can't and i can't open the album cause the sd card it's not recognised..

Thanks in advance

 

[Hayato213]

SD card format? got any NAND backup?

 

[MITSMOUTS]

SD card format? got any NAND backup?

No i dont have

--------------------- MERGED ---------------------------

No i dont have

I will try to format my sd card now

 

[Hayato213]

No i dont have

--------------------- MERGED ---------------------------


I will try to format my sd card now

If you don't have exfat driver on the SD card then you have to with FAT32 route, seem like you didnt go with the exfat driver installation.

 

[MITSMOUTS]

If you don't have exfat driver on the SD card then you have to with FAT32 route, seem like you didnt go with the exfat driver installation.

ok thanks for the help i will try to format to fat32

 

[Hayato213]

ok thanks for the help i will try to format to fat32

If your current format is Exfat it would asks you to get the driver, so you have to go with FAT32 route for now, you can reinstall the firmware with choidujourNX with exfat , but I would recommend using FAT32 due to exFAT corruption problem.

 

[MITSMOUTS]

If your current format is Exfat it would asks you to get the driver, so you have to go with FAT32 route for now, you can reinstall the firmware with choidujourNX with exfat , but I would recommend using FAT32 due to exFAT corruption problem.

Thank you very much it worked so now should i update to exfat firmware using rajkosto then format my sd card to exfat?

 

[Hayato213]

Thank you very much it worked so now should i update to exfat firmware using rajkosto then format my sd card to exfat?

I would avoid using exfat as the format for the sd card, you can always split the size of NSP to fit on to a FAT32 card, there is always usb install also, no need of exfat, only reason I can come up with is is if you want to run XCI off a hdd with SX OS you would want to install the exFAT driver beside that it is bad for homebrew/cfw.

 

[MITSMOUTS]

I would avoid using exfat as the format for the sd card, you can always split the size of NSP to fit on to a FAT32 card, there is always usb install also, no need of exfat, only reason I can come up with is is if you want to run XCI off a hdd with SX OS you would want to install the exFAT driver beside that it is bad for homebrew/cfw.

OK thank you very much for your help is there something i can do to rate you?

 

[Hayato213]

OK thank you very much for your help is there something i can do to rate you?

No the forum has no rating system, and you are welcome.