ROM Hack My switch got bricked while adding exfat format to it

[gust1337]

couple days ago i recieved sx pro i used it like once and i got my sd card otherday
it is sdxc so switch didn't read it and it said it needs update so i was scared to update cuz of being banned by goin online
so i searched it.
found this video:
at the hacdiskmount part i used a wrong .xci game to patch after i restored the bins i just unplugged the usb cable
tried to turn on i didn't turn on when i plug the switch to pc it makes a "bip" noise but i can't put it to rcm mode or anything
is there any solution for this? or should i just trash the switch


and the hacdiskmount logs:

[13:05:35:621698] [info] Trying to read partition table from \\?\PhysicalDrive2
[13:05:35:646621] [info] Loaded primary GPT, checking secondary from offset 31268535808
[13:05:35:655899] [info] Secondary GPT is okay
[13:05:35:656231] [info] Using primary GPT as backup GPT is identical
[13:05:51:468038] [info] Dumped 8.000MiB in 0 minutes 3 seconds 28 ms (2.642MiB/s)
[13:17:39:283817] [info] Restored 8.000MiB in 0 minutes 2 seconds 937 ms (2.724MiB/s)
[13:18:12:128313] [info] Restored 8.000MiB in 0 minutes 2 seconds 994 ms (2.672MiB/s)
[13:21:30:389638] [info] Restored 0.000000B in 0 minutes 4 seconds 832 ms (0.000000B/s)

 

[yacepi15]

couple days ago i recieved sx pro i used it like once and i got my sd card otherday
it is sdxc so switch didn't read it and it said it needs update so i was scared to update cuz of being banned by goin online
so i searched it.
found this video:
at the hacdiskmount part i used a wrong .xci game to patch after i restored the bins i just unplugged the usb cable
tried to turn on i didn't turn on when i plug the switch to pc it makes a "bip" noise but i can't put it to rcm mode or anything
is there any solution for this? or should i just trash the switch


and the hacdiskmount logs:

[13:05:35:621698] [info] Trying to read partition table from \\?\PhysicalDrive2
[13:05:35:646621] [info] Loaded primary GPT, checking secondary from offset 31268535808
[13:05:35:655899] [info] Secondary GPT is okay
[13:05:35:656231] [info] Using primary GPT as backup GPT is identical
[13:05:51:468038] [info] Dumped 8.000MiB in 0 minutes 3 seconds 28 ms (2.642MiB/s)
[13:17:39:283817] [info] Restored 8.000MiB in 0 minutes 2 seconds 937 ms (2.724MiB/s)
[13:18:12:128313] [info] Restored 8.000MiB in 0 minutes 2 seconds 994 ms (2.672MiB/s)
[13:21:30:389638] [info] Restored 0.000000B in 0 minutes 4 seconds 832 ms (0.000000B/s)

In your PC, right click in the modified dump, properties and check if it is 0 bytes. If it isnt, flash it again. If it is, flash the original one and your switch will boot again.

PS: The log says that you've flashed something and 20s later, something with 0 bytes.

 

[gust1337]

In your PC, right click in the modified dump, properties and check if it is 0 bytes. If it isnt, flash it again. If it is, flash the original one and your switch will boot again.

PS: The log says that you've flashed something and 20s later, something with 0 bytes.

do you mean "BCPKG2-1-Normal-Main.bin" by dump?

 

[gust1337]

In your PC, right click in the modified dump, properties and check if it is 0 bytes. If it isnt, flash it again. If it is, flash the original one and your switch will boot again.

PS: The log says that you've flashed something and 20s later, something with 0 bytes.

hacdiskmount cant see the switch from the physical drive section that's the problem

 

[yacepi15]

hacdiskmount cant see the switch from the physical drive section that's the problem

I that case, i don't know how to help you, wait for someone else... You don't have a NAND backup, right?

 

[gust1337]

I that case, i don't know how to help you, wait for someone else... You don't have a NAND backup, right?

no i only got the BCPKG2-1-Normal-Main.bin backup