Hardware Laptop Charging Problem

Nathan Drake

Obligations fulfilled, now I depart.
OP
Member
Joined
Jan 2, 2011
Messages
6,192
Trophies
0
XP
2,707
Country
Recently, my laptop, a Presario CQ62 Notebook PC (yay copy and paste) has been having steadily worsening charging issues. I bought this as a refurbished computer specifically for school back in August. I have a theory, but I figured I'd ask a group of generally knowledgeable people in the computer department for their thoughts so that I can consider my next step.

A month and half back, I pulled my laptop off the charger to do help out a friend with something. Not something my laptop isn't used to. Normally, my laptop just sits on a desk that, I'll admit, is somewhat crowded and doesn't provide absolutely perfect ventilation. When I went to plug it back in that night, I couldn't get it to charge at all. I just let my laptop sit normally for a few hours and hit the hay early that night. Around 4am, I woke up and couldn't sleep for awhile, so I plugged it back in. Boom, it started charging.

After that, I was honestly scared to pull it off the charger. When I went home for Thanksgiving, that was the first time it had been pulled from the charger in a few weeks. Upon plugging it back in at home, it seemed to charge fine. Upon taking it back to school, still seemingly the issue had gone. But then, I brought it home this time.

I enjoy watching Netflix in bed on my laptop (though I'm getting more accustomed to using my tablet due to these recent problems), and it seems that whenever I have the laptop at a weird angle for more than about 30 minutes, the laptop stops charging. No amount of cord fiddling ever fixes it. Yet, if I close the laptop, set it down as you normally would a laptop and leave the cable in, within about 30 minutes, my laptop starts charging once more.

Now, what I think:

I think the solder holding the charging port in place has stopped doing its job, and that my charging port doesn't sit in place right when I move the laptop around in odd positions. When I let it sit for a little while, the charging port re-centers, and the current starts flowing properly once more.

To note, I tried two different chargers, one from a computer that uses a charger identical to mine, and I ran into the same issues. As well, fiddling with the charger in absolutely any way does not seem to yield any result. That means the charger is likely entirely innocent.

To put my mind at ease, since I absolutely can not afford a new computer, but a simple repair could easily be taken care of by the right people for relatively cheap:

How likely is it that my charging port is connected to the motherboard (as in, physically connected to the degree that when broken, the entire motherboard has to be replaced), and that there's motherboard damage? Based on the odd charging issues only when the computer is angled, and it seeming to charge again only after the computer has essentially had time to settle, I'd like to say this is unlikely at least for my computer. I'm not willing to open it myself and look though, due to not exactly feeling competent enough to dismantle my computer and put it back together right.

Am I at least potentially on the right track? Because I figure if it's just the solder, it's probably a cheap repair.

Thanks in advance for any help, even if it's just affirmation that I'm not entirely stupid.
 

dilav

Well-Known Member
Member
Joined
Nov 22, 2006
Messages
1,248
Trophies
1
XP
408
Country
United States
Not all laptops have the charge jack soldered on to the motherboard (those that do are usually pretty sturdy), some are on a wire which plugs in to the motherboard, or a daughter board.

Most laptop charge problem I've seen comes from those 'three pin' chargers with a outer ring, outer-inner ring, and a small center pin. The small center pin does not make contact with the jack and the windows reports the charger is "plugged in, not charging"

If your laptop has this 'three pin' charger you probably want to replace the power jack.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • Psionic Roshambo @ Psionic Roshambo:
    Honestly after the PS3 and 360 I just went full PC
  • K3Nv2 @ K3Nv2:
    Every games basically cross platform they only have about 6 titles making it worth the $600 price tag
  • Psionic Roshambo @ Psionic Roshambo:
    Didn't see much need for a console, all the advantages have kind of disappeared
  • ColdBlitz @ ColdBlitz:
    the ps3 used to support installing linux because the cpu was so powerful
  • K3Nv2 @ K3Nv2:
    Then the games are $70 and they want to reboot and refresh the same game every year
  • K3Nv2 @ K3Nv2:
    The ps3 was always Linux they just found a way to make it open source
  • ColdBlitz @ ColdBlitz:
    I'm avoiding buying from the big 3 at all atm
  • Psionic Roshambo @ Psionic Roshambo:
    At one point PC game pads where poorly supported, loading a game had setup, it was complicated. Now it's almost as easy as a console.
  • ColdBlitz @ ColdBlitz:
    nintendo needs to up their game soon
  • K3Nv2 @ K3Nv2:
    Yeah even bt support for Xbox one controllers are just as easy as pairing
    +1
  • ColdBlitz @ ColdBlitz:
    considering the steamdeck can emulate the switch (yikes) theres almost 0 reason to buy the switch apart from playing online and using cartridges
  • K3Nv2 @ K3Nv2:
    Xinput and 360 dongles were a driver nightmare
  • K3Nv2 @ K3Nv2:
    I remember having to manually put in drivers and what not
  • Psionic Roshambo @ Psionic Roshambo:
    Yeah the 360 dongles sucked
  • Psionic Roshambo @ Psionic Roshambo:
    But the new Xbox pads? PIr it up and if a game supports it it just works
  • K3Nv2 @ K3Nv2:
    Most emulators even automatically detect them now
  • Psionic Roshambo @ Psionic Roshambo:
    Yeah it's a good time to be alive lol
  • Psionic Roshambo @ Psionic Roshambo:
    Pi4 and Batocera works with them perfectly too
  • K3Nv2 @ K3Nv2:
    I'd like to see future tap to pair options like you hold it over a scanner and it just automatically pairs
  • K3Nv2 @ K3Nv2:
    No need for additional cords buttons or anything
  • Psionic Roshambo @ Psionic Roshambo:
    Hmmm yeah that is possible BT has an address like an IP
  • Psionic Roshambo @ Psionic Roshambo:
    Scan a QR code on your phone open a page with the controller and a QR code for the device, hit go and done
  • K3Nv2 @ K3Nv2:
    One less latency issue for radio frequency
  • K3Nv2 @ K3Nv2:
    Or even wifi pair opening just an app to sign is nice
  • Psionic Roshambo @ Psionic Roshambo:
    Yeah it could be hosted on the phone hmmm it's an idea Ken
    Psionic Roshambo @ Psionic Roshambo: Yeah it could be hosted on the phone hmmm it's an idea Ken