Hacking Hardware Instinct NX - V6 Black randomly start OFW, Help?

[Rick00]

Hello, installed a modchip instinct NX v6 black on my oled, I used the PCB permanent adapter method so the DATO Is permanent fixed, now the chip mostly works good but sometimes It starts OFW instead of Hekate, the led pattern when the problem happens Is: Red blinking light and Yellow light (not blinking) then OFW starts.

The usual led pattern when everything works fine Is: Red blinking light and Green light(not blinking) then Hekate starts.

Please help, do you maybe have any idea what the problem can be? I searched everywhere can't find anyone with this same led pattern error.. Thanks everyone will take some of their time to help me.

 

[thesjaakspoiler]

Maybe your led isn't the best led and the colors are a bit off.
A good start should be purple and then green.
So your modchip might be trying to tell you something else.

Sometimes not working usually is an indication of a bad connection somewhere.
So a good visual inspection is the first step.
With a multimeter in diode mode you can check the connections.
Just search the forum for such topics.

 

[Rick00]

Thanks for your reply, of course I already checked all connections before, and all have Good values, about the purple and green, are you sure those are not old Chips? Saw some videos and some had Red and green as me for a good start