Hi guys, I installed a HWFLY modchip in my V2 Mariko Switch (on latest 16.0.3 firmware) but I having some troubles to get it working.
The modchip is installed correctly and it's updated (I update via USB to release 0.7.2 of hwfly-nx with improved support for Toshiba eMMC) and seems to working just fine, however I cant boot into Hekate or even the OFW itself (getting the blue screen on OFW, maybe i bricked the eMMC somehow, idk).
I tried several instances of hekate on the SD, older and newer versions and the best result I have was with 6.0.4. Using this the chip pulses just fine but nothing appears on screen, but if I remove the SD card the screen show this text:
Failed to init or mount SD!
hekate exception occurred (LR 40012E242):
DABRT
Press any key...
Pressing any key brings me to the text-based Hekate 6.0.4, and there says "Warning: Nyx is Missing!". I read somewhere that Nyx is the GUI for the Hekate, so makes sense they not appear. But even reinstalling Hekate several times/versions this problem persists. If I put the SD card back into console and go back to the hekate text menu and choose Reboot i came back to black screen, and removing the SD card again appears the same error as before with a slighty change:
Failed to init or mount SD!
hekate exception occurred (LR 40014B74):
DABRT
Press any key...
I tried with 3 good working SD cards: 128GB SanDisk, 64GB HP and a 16GB generic
Also tried FAT32 and ExFAT, format using Rufus, EaseUS Partition Master, Windows itself, check the partition is primary etc.
If I try to boot normally with the SD card inserted and wait on the black screen, after several minutes this error occours:
Failed to init or mount SD!
hekate exception occurred (LR 40028D08):
RESET
Press any key...
Maybe I screwed the eMMC but don't know how. Going to console info on Hekate and choosing eMMC the console reboots, but Hekate doesnt need the eMMC to boot, right?
If anyone could help with tips or tell me what i'm doing wrong will be very helpful! <3
The modchip is installed correctly and it's updated (I update via USB to release 0.7.2 of hwfly-nx with improved support for Toshiba eMMC) and seems to working just fine, however I cant boot into Hekate or even the OFW itself (getting the blue screen on OFW, maybe i bricked the eMMC somehow, idk).
I tried several instances of hekate on the SD, older and newer versions and the best result I have was with 6.0.4. Using this the chip pulses just fine but nothing appears on screen, but if I remove the SD card the screen show this text:
Failed to init or mount SD!
hekate exception occurred (LR 40012E242):
DABRT
Press any key...
Pressing any key brings me to the text-based Hekate 6.0.4, and there says "Warning: Nyx is Missing!". I read somewhere that Nyx is the GUI for the Hekate, so makes sense they not appear. But even reinstalling Hekate several times/versions this problem persists. If I put the SD card back into console and go back to the hekate text menu and choose Reboot i came back to black screen, and removing the SD card again appears the same error as before with a slighty change:
Failed to init or mount SD!
hekate exception occurred (LR 40014B74):
DABRT
Press any key...
I tried with 3 good working SD cards: 128GB SanDisk, 64GB HP and a 16GB generic
Also tried FAT32 and ExFAT, format using Rufus, EaseUS Partition Master, Windows itself, check the partition is primary etc.
If I try to boot normally with the SD card inserted and wait on the black screen, after several minutes this error occours:
Failed to init or mount SD!
hekate exception occurred (LR 40028D08):
RESET
Press any key...
Maybe I screwed the eMMC but don't know how. Going to console info on Hekate and choosing eMMC the console reboots, but Hekate doesnt need the eMMC to boot, right?
If anyone could help with tips or tell me what i'm doing wrong will be very helpful! <3
Last edited by PosquitoSan,