Homebrew Homebrew Forwarder ISO's

[TiMeBoMb4u2]

can anyone do a scummvm cover please
QUOTE(slayer080 @ Oct 22 2009, 07:12 AM) cover for scummvm anyone??

I'll see what I can do slayer080. Thanks, for being patient.

 

[jakejm79]

I've tested with the 4.0.9, as well as 4.1.2 of snes9x, and two seperate versions of gbagx. I've tested with the configuration file placed in USB://apps/snes9x/ AND SD://apps/snes9x/ I've had a configuration file placed in BOTH locations. I've tried having the forwarder hit just SD, I've had the forwarder hit just USB, and I've had it hit whatever it attempts to load first. In all cases the configuration file for the emulator is NOT read. It's as if the emulator cannot locate the configuration file. Without changing anything and merely rebooting into HBC I can load the emulators directly and they immediately pick up the proper configuration.

What launcher are you using? I've only tested under Wiiflow. My niave assumption is that the emulators look in the directory they were loaded from for the configuration file. Due to the way the forwarder is launching them they are either attempting to use a directory that simply does not exist, or perhaps they are not passed the argument(?).

I'm using whatever is the newest version available on the homebrew browser. I don't recall where my config file is, but I will check when I get home, I just dragged the contents of my old SD card onto my USB HDD and after the first boot of asking for the rom folder, and selecting the USB drive, it has worked fine since. I am using WiiFlow 1.1 R13 cIOS222, tho I did have to set the IOS to 249 to get it to load without blackscreening.

 

[spayrosam]

spayrosam: Do you think you could look into making a version of triiforce which would autoboot a title from emulated nand? I would really appreciate that.. I could do some general splashes for like wiiware, n64, etc.

I'm up to my ears with work.
sorry! i can't promise anything...
Many, many thanks for your great work

 

[guitarloser85]

cover for scummvm anyone??

Did this myself, until someone who knows what they are doing makes one. Mostly ripoffs of googled images, the one on the back is by nick666's channel forwarder.

 

[roku93]

Now it should be exactly the same layout.

 

[lettuce]

I've tested with the 4.0.9, as well as 4.1.2 of snes9x, and two seperate versions of gbagx. I've tested with the configuration file placed in USB://apps/snes9x/ AND SD://apps/snes9x/ I've had a configuration file placed in BOTH locations. I've tried having the forwarder hit just SD, I've had the forwarder hit just USB, and I've had it hit whatever it attempts to load first. In all cases the configuration file for the emulator is NOT read. It's as if the emulator cannot locate the configuration file. Without changing anything and merely rebooting into HBC I can load the emulators directly and they immediately pick up the proper configuration.

What launcher are you using? I've only tested under Wiiflow. My niave assumption is that the emulators look in the directory they were loaded from for the configuration file. Due to the way the forwarder is launching them they are either attempting to use a directory that simply does not exist, or perhaps they are not passed the argument(?).

I'm using whatever is the newest version available on the homebrew browser. I don't recall where my config file is, but I will check when I get home, I just dragged the contents of my old SD card onto my USB HDD and after the first boot of asking for the rom folder, and selecting the USB drive, it has worked fine since. I am using WiiFlow 1.1 R13 cIOS222, tho I did have to set the IOS to 249 to get it to load without blackscreening.

Does seem strange that some people have no issues with getting forwarder and ISO to locate there USB drive, and then some have the same problem i do and cant get the emulators to find the USB drive. Why would it not read the info form the config file when using a forwarder or ISO emulator? Could we just add the config file to the SD card would that work?

 

[Jiiwah]

Here you have everything to create an iso for homebrew

http://www.mediafire.com/?sharekey=cffc65c...7b01fe6e4055ae3

Enjoy

please uploads your ISOs here..

Here is my contribution :

Internet Channel-ISO-CICP00

TESTED ON WIIFLOW 1.1

Thanks Spayrosam for the sources

I hope someone can give us a cover.

 

[pepxl]

Here you have everything to create an iso for homebrew

http://www.mediafire.com/?sharekey=cffc65c...7b01fe6e4055ae3

Enjoy

please uploads your ISOs here..

Here is my contribution :

Internet Channel-ISO-CICP00

TESTED ON WIIFLOW 1.1

Thanks Spayrosam for the sources

I hope someone can give us a cover.

nice man, i test this asap and put a cover together tomorrow aswel as the photo channel

 

[TiMeBoMb4u2]

Now it should be exactly the same layout.
NICE! It looks GREAT! Now we just need someone to make a WiiRadio ISO Forwarder that actually works!
I tried installing WiiRadio from the following post, but it does not work on my NTSC-U Wii, using WiiFlow v1.1.
I've tried changing the video mode around, but it still doesn't work.
What directories is it looking for?

QUOTE(spayrosam @ Oct 21 2009, 05:29 PM) I have created many ISOs. can someone please test with me..
Homebrew
http://www.mediafire.com/?sharekey=cffc65c...1390143435ec59c
Wiiware
http://www.mediafire.com/?sharekey=cffc65c...47708e37b913e74

System Channel
Mii Channel-ISO-CMIE00-HACA NTSC-U OK
Photo Channel-ISO-CPCE00-HAAA NTSC-U OK
Shopping Channel-ISO-CSCE00-HABA NTSC-U OK
Photo Channel1.1-ISO-CPCE00-HAYA NTSC-U OK
Photo Channel1.1-ISO-CPCP00-HAYA PAL OK

Homebrew
GeeXbox-ISO-CGXE00 NTSC-U OK
GeeXbox-ISO-CGXP00 PAL OK
WiiRadio-ISO-CWRE00 NTSC-U OK
WiiRadio-ISO-CWRP00 PAL OK

@roku93 many thanks for the wonderful splashs

Wiiware
Megaman 9-ISO-CR9P00-WR9P PAL OK
Megaman 9-ISO-CR9E00-WR9E NTSC-U
Onslaught-ISO-CSAP00-WSAP PAL OK
Onslaught-ISO-CSAE00-WSAE NTSC-U
Dr. Mario & Germ Buster-ISO-CDME00-WDME NTSC-U
Dr. Mario & Germ Buster-ISO-CDMP00-WDMP PAL OK

 

[dartdude6]

Sorry to be a noob, but making the VC/WiiWare forwarders seems pretty complicated to me. Can I request a few VC forwarders? - Paper Mario (Someone PLEASE make this one even if you don't make any of the others), Gunstar Heroes, Super Mario RPG, Yoshi's Story, The Legend of Zelda; Ocarina of Time, Mega Man II, Mario Kart 64, Kirby 64, Super Castlevania IV, Sonic the Hedgehog (Genesis), The Legend of Zelda (NES), and Super Mario Bros. (NES). All of these are NTSC-U.

 

[TiMeBoMb4u2]

Sorry to be a noob, but making the VC/WiiWare forwarders seems pretty complicated to me. Can I request a few VC forwarders? - Paper Mario (Someone PLEASE make this one even if you don't make any of the others), Gunstar Heroes, Super Mario RPG, Yoshi's Story, The Legend of Zelda; Ocarina of Time, Mega Man II, Mario Kart 64, Kirby 64, Super Castlevania IV, Sonic the Hedgehog (Genesis), The Legend of Zelda (NES), and Super Mario Bros. (NES). All of these are NTSC-U.

I would be glad to help, if someone would make a tutorial!
It seems that most of the NTSC-U ISO Forwarders have issues.

 

[pepxl]

I would be glad to help, if someone would make a tutorial!

i agree here, any chance of one spayosam? all attempts at previous ISO's just fail lol im not sure about the partition builder part of it

 

[dartdude6]

I would be glad to help, if someone would make a tutorial!
It seems that most of the NTSC-U ISO Forwarders have issues.

Problems with the NTSC-U loaders? Are you talking about the just the WiiWare/VC launchers or the homebrew ones also? Because I've been using the Homebrew Channel, Homebrew Broswer, SNES9x,VBAGX, FCE Ultra, and Triiforce NTSC-U forwarders with WiiFlow and haven't had a problem yet.

 

[TiMeBoMb4u2]

I would be glad to help, if someone would make a tutorial!
It seems that most of the NTSC-U ISO Forwarders have issues.

Problems with the NTSC-U loaders? Are you talking about the just the WiiWare/VC launchers or the homebrew ones also? Because I've been using the Homebrew Channel, Homebrew Broswer, SNES9x,VBAGX, FCE Ultra, and Triiforce NTSC-U forwarders with WiiFlow and haven't had a problem yet.

The Homebrew Channel Forwarder works for me, but I can't seem to get the WiiRadio one to work. Does anyone know what the WiiRadio Forwarder Path is looking for?

 

[Skizzo]

Here you have everything to create an iso for homebrew

These are the 'ingredients'. Now we just need the 'recipe'.

 

[Skizzo]

I would be glad to help, if someone would make a tutorial!

i agree here, any chance of one spayosam? all attempts at previous ISO's just fail lol im not sure about the partition builder part of it

This is where I failed too I believe. I was trying to follow Dack's instructions for modifying Marcan's iso_template.iso released some time ago. I was going to try and use the 00000001.app (renamed to main.dol?) from a TriiForce channel WAD created with Crap. Not sure if that'd be easier (or as compatible) than installing the development environment and modifying the TriiForce code to launch a preset game and recompiling for every title we'd want and then using that .dol for the forwarder.

If I find any useful info, I'll let you guys know.

 

[slayer080]

can anyone do a scummvm cover please
QUOTE(slayer080 @ Oct 22 2009, 07:12 AM) cover for scummvm anyone??

I'll see what I can do slayer080. Thanks, for being patient.

thank you

 

[guitarloser85]

Just FYI, Klinikal's upload of ScummVM NTSC-U to mediafire (http://www.mediafire.com/?mfdkzqcidkz) isn't loading. It just sits there after you click download and then times out. Re-up?

 

[TiMeBoMb4u2]

Now it should be exactly the same layout.

Okay... I've recompiled the WiiRadio Forwarder ISO (CWRE00).
It has the new splash screen, and is now working on my NTSC-U Wii, without patching any video crap.

Get It Here: http://www.mediafire.com/download.php?mlytn1zo2yn

PATHS: WiiRadio
USB:/apps/radiow/boot.dol
SD:/apps/radiow/boot.dol

 

[TiMeBoMb4u2]

can anyone do a scummvm cover pleaseQUOTE(slayer080 @ Oct 22 2009, 07:12 AM) cover for scummvm anyone??

I'll see what I can do slayer080. Thanks, for being patient.

thank you

Okay... Here you go, slayer080!