I bought this switch on the cheap hoping i could bring it back to life. From what i've read a corrupt nand could be the cause as well as major hardware problems with the cpu/gpu. Hoping for the former i got a guide to downgrade the firmware in order to get it working again. I setup my sd card with the relevant files and launched hekate payload with tegra rcm on pc. The screen was black even though it said it was successful. After trying to send the payload a bunch more times without success i removed the sd card and sent the payload again. This time it got to the hekate menu. unfortunately when i insert the sd card it gave an error saying that the sd card could not be mounted. Since it could only send a payload with no sd card inserted i decided to open it up to see what the problem was. To my surprise this switch was never opened before. there was no visible damage inside or signs of water damage. i then proceed to re seated the sd card reader but still it doesn't work. I tried the sd card reader in my working switch and it works so the reader is not the problem. Also i don't see any damage on the pins on the board where the sd reader connects. as i have stated previously i'm the first to open it. Does anyone have idea as to why payloads only work without the sd card inserted and what could be causing the sd card not to be detected. willing try any suggestions before i give up. thanks.
Last edited by atavol,