Hacking Help , Did i break my switch ?

[TheShit00]

Help guys my switch cant detect rcm mode or open in normal way its just a black screen . So here`s what i do i tried to restore my nandbackup first i restore the eMMC BOOT0 & BOOT1 and restore the nand but it say size of the sd card backup does not match emmc selected part size . then i tried to boot in normal using hekate now it turns black and cant detect rcm mode . i tried to hold down the power button 15secs still the same issue black screen without detecting rcm . Btw this switch is auto rcm

 

[Hazurio]

did you tried to put the switch in your dock for a few hours?
your battery may be at % 0

 

[TheShit00]

did you tried to put the switch in your dock for a few hours?
your battery may be at % 0

Yes i tried it , my bat is at 80% when i saw it in hekate menu

 

[tglaria]

Help guys my switch cant detect rcm mode or open in normal way its just a black screen

what?

Yes i tried it , my bat is at 80% when i saw it in hekate menu

What do you mean with RCM mode?
You got into hekate...

 

[TheShit00]

the blackscreen is not rcm mode any more, cause i cant detect it using my android or pc. I think it brick

--------------------- MERGED ---------------------------

what?




What do you mean with RCM mode?
You got into hekate...

Before it brick , i can open hekate and restore eMMC BOOT0 & BOOT1 it successfully restore but when i try restoring the nand it say " the sd card backup does not match emmc selected part size " then i feel frustated so i launch it in normal boot using hekate but it only go to blackscreen , then i tried to hold down the power button 40secs nothing work its still blackscreen and not detecting the rcm

 

[tglaria]

But you said you got hekate loaded.
So, you already sent a payload to the switch, or am I misunderstanding something?

 

[TheShit00]

But you said you got hekate loaded.
So, you already sent a payload to the switch, or am I misunderstanding something?

Before it brick , i can open hekate and restore eMMC BOOT0 & BOOT1 it successfully restore but when i try restoring the nand it say " the sd card backup does not match emmc selected part size " then i feel frustated so i launch it in normal boot using hekate but it only go to blackscreen , then i tried to hold down the power button 40secs nothing work its still blackscreen and not detecting the rcm

 

[tglaria]

Before it brick , i can open hekate and restore eMMC BOOT0 & BOOT1 it successfully restore but when i try restoring the nand it say " the sd card backup does not match emmc selected part size " then i feel frustated so i launch it in normal boot using hekate but it only go to blackscreen , then i tried to hold down the power button 40secs nothing work its still blackscreen and not detecting the rcm

Did you "shorted" the pins to try to enter rcm ?

 

[TheShit00]

Did you "shorted" the pins to try to enter rcm ?

i enabled auto rcm , but as of now i dont have any rcm jig i only have the paper clip (it work before) . should i tried that ?

 

[tglaria]

i enabled auto rcm , but as of now i dont have any rcm jig i only have the paper clip (it work before) . should i tried that ?

Did you read what Auto RCM does and how it does it?

Basically, it corrupts BOOT0/1, if you restored that, then you don't have it corrupted anymore and so you have disabled AutoRCM.

 

[TheShit00]

Did you read what Auto RCM does and how it does it?

Basically, it corrupts BOOT0/1, if you restored that, then you don't have it corrupted anymore and so you have disabled AutoRCM.

Ok cool so what im going to do right now is put the paper clip and enter rcm mode right ? my other corcern are i only see a blackscreen and sometimes the paper clip method wont work base on my experience before. So my question is if the paper clip method wont work i guess it boot to normal even the screen is black ? is that correct ? then should i press the power button 40secs to turn it off ?

 

[altorn]

Ok cool so what im going to do right now is put the paper clip and enter rcm mode right ? my other corcern are i only see a blackscreen and sometimes the paper clip method wont work base on my experience before. So my question is if the paper clip method wont work i guess it boot to normal even the screen is black ? is that correct ? then should i press the power button 40secs to turn it off ?

if paper clip doesn't work, you're probably gonna be booting into OFW. if you want it to work you have to adjust the paper clip so it actually touches pins 1 and 10. press power + vol up and connect to usb to PC. if your switch boots into OFW, you have to re-seat your paper clip and try again. i get this issue sometimes because my paper clip is badly made by me. it should just be black screen if you have the paper clip and press power + vol up.

 

[TheShit00]

Still not working i guess my switch is brick . I dont know if it boot to ofw or rcm cause it only show a black screen . Btw thank guys for your time

 

[tglaria]

Ok cool so what im going to do right now is put the paper clip and enter rcm mode right ? my other corcern are i only see a blackscreen and sometimes the paper clip method wont work base on my experience before. So my question is if the paper clip method wont work i guess it boot to normal even the screen is black ? is that correct ? then should i press the power button 40secs to turn it off ?

I would read a bit more about how does RCM work, what do I need to do and what are the possible reason for a black screen.
I would also read about what happens when a 'nand restore' fails.

I did not understand what you did, I'm guessing english is not your born language (it isn't mine) so there'll be a bit of misscomunication on both parts.
Just be understand what you're doing, remember that you can in fact brick your switch.

 

[TheShit00]

I would read a bit more about how does RCM work, what do I need to do and what are the possible reason for a black screen.
I would also read about what happens when a 'nand restore' fails.

I did not understand what you did, I'm guessing english is not your born language (it isn't mine) so there'll be a bit of misscomunication on both parts.
Just be understand what you're doing, remember that you can in fact brick your switch.

I see thank you for your time . Think i`ll give up on this .

 

[Zkajavier]

You'll need a jig, just get one or make one and try again several times.
Worst case scenario you'll have to create a new emunand but this sounds far from bricked to me.

Remember that when launching with a jig (power + vol up) all you get is a black screen, here is when you have to connect it to the PC and inject a payload to get it running.

 

[Hazurio]

why using a jig when you also can use some thin tinfoil and put it into your joy-con

 

[AugustC]

Your switch is patched or unpatched unit? I read somebody mentioned autorcm will brick any patched unit.

 

[tglaria]

Your switch is patched or unpatched unit? I read somebody mentioned autorcm will brick any patched unit.

The user had autorcm enabled and used it to boot a payload (¿hekate?).
The black screen started after restoring BOOT0/1.
So I'm guessing that no, it's not a ipatched unit.

 

[AugustC]

The user had autorcm enabled and used it to boot a payload (¿hekate?).
The black screen started after restoring BOOT0/1.
So I'm guessing that no, it's not a ipatched unit.

It might be fusee gelee bugs, I believe OP restore to a firmware lower than the fuse count, may be a wrong firmware or a corrupted firmware, it’s 32gb anything is prone to failed.