NUS Auto Downloader 4.1.6 HackMii Solutions Guide
Generated on Fri 07/16/2010 - 20:27:07.62
Check for updates at tinyurl.com/nusauto
This Guide was generated using the following parameters:
* Current firmware is 4.2
This software is not for sale. If you paid for this software or a "bundle" you have been scammed.
THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY, NEITHER STATED NOR IMPLIED.
NO ONE BUT YOURSELF IS TO BE HELD RESPONSIBLE FOR ANY DAMAGE THIS MAY CAUSE TO YOUR NINTENDO WII CONSOLE!
USE THIS AT YOUR OWN RISK!
IMPORTANT NOTES:
*This guide does NOT require a Wifi connection on your Wii.
*An SD card formatted to FAT(32) required (Best results are with non-SDHC cards, SDHC will only work on 4.0 or above).
*If you get errors during any of the steps reformat your SD card as FAT or FAT32
*Turn off WiiConnect24 and take out all gamecube memory cards/controllers when modding the Wii (unless instructed otherwise).
*If your Wii ever freezes, hold the power button on the Wii for 5 seconds to power it off then try again.
*Don’t ever accept a new Nintendo update without first googling to see if it’s safe. The last update (to 4.3) was released in late June 2010 and is NOT safe to accept. If you accept an official Nintendo update after modding the Wii, you may lose some or all of your modifications.
*Updates via homebrew or homebrew apps are safe to accept
*Never uninstall a system menu or IOS
*Do not install untested wads/themes without Bootmii or Priiloader installed.
*This custom guide is great start, but Wii modding is always evolving. Check for updates online, and remember, google is your friend.
*If you have questions, a more detailed guide can be found here:
http://www.completesoftmodguide.tk
1) LAUNCH Multi-Mod Manager (MMM)
Start the HBC and load Multi-Mod Manager (MMM). Once you've loaded MMM, move onto the next step.
If you are missing the HBC or it is failing to load any apps (just blackscreens), launch MMM via bannerbomb.
Run BannerBomb v2 by selecting the SD Card Button on the main system menu screen and choosing yes to load boot.dol/elf
Note: If it doesn't work for you, visit
http://bannerbomb.qoid.us/ for more variations of either version of bannerbomb.
2) INSTALL IOS34 AND IOS61 USING Multi-Mod Manager (MMM)
In Multi-Manager Mod's main menu, Go down to select "WAD Manager".
Now install IOS34v3348 and IOS61v5661.
Navigate to each wad and hit A twice to install the IOSs individually.
Be careful not to install any additional wads that may have been previously saved in this folder (they may be safe, but I cannot say for sure).
Make sure both the files install properly.
If any failed, make a note of which ones and retry installing them.
Move onto the next step after successfully installing both wads, but do NOT exit MMM.
3) INSTALL THE HOMEBREW CHANNEL (HBC)
In MMM's main menu, select 'App Manager' and then select the HackMii_Installer.
Use the Hackmii Installer to fix/re-install the HBC. If you haven't done so already, you should also install DVDx and BootMii as IOS and as Boot2 (if possible).
Once you've successfully reinstalled the HBC, you are finished with this guide.
If you already exited MMM, you can load the HackMii_Installer from the Homebrew Channel.
If the HBC is failing to load any apps (just blackscreens), instead launch MMM using Bannerbomb (described in Step 1), then in MMM's main menu, select 'App Manager' and then select the HackMii_Installer.
This will launch the HackMii Installer, use it to reinstall your Homebrew Channel.
4) SUPPORT XFLAK
IF NUS AUTO DOWNLOADER WORKED FOR YOU, PLEASE VOTE IN FAVOUR OF THE PROGRAM HERE:
http://tinyurl.com/nusauto
CHECK OUT MY TOP CHANNELS HERE (tinyurl.com/topchannels)
CHECK OUT MY CRAZY INTRO VIDEOS HERE (tinyurl.com/crazyintro)
