GameCube Backup Launcher 0.2

[akash86]

i installed cMios c3 from waninko, and everything was fine, and then i wanted to uninstall preloader, and i was on 3.2, so i went down to 3.1, and then back up to 3.2. and then, i reinstalled the cMios v3. none of my gc backups ever show up in the disc channel as a real game anymore, wut should i do?

 

[Hells Guardian]

thats because you need CIOScorp or the system menu has to load from CIOS. (Preloader can do that for you)

 

[FGOD]

that is not true, you need the cmios installer from wiigator to install not only the cmios but also the backup compability for the disc channel...therefor you need to press x in the setup...

 

[jgme]

Hey WiiGator.... First off, THANKS for this awesome Loader. Everyone has wanted a WII GC loader for years now and you finally pulled it off. You are THE MAN, and thanks again for what must have been a lot of grueling hours of hard work.

On a lighter note, your last two versions have worked great, but the current version 2.0 caused my gamecube controller to stop working once the game loads. The controller works fine during your backup launcher screen, but once the game loads none of the buttons will respond. I cant press "start" to load the game or anything else, so the opening videos just keep looping. I have tested the games and controller with your previous versions and they work perfectly, but 2.0 gives me a complete GC controller failure in the game.

Just for reference, ..... softmodded Wii only, no hard mods, never updated, version 3.1U, twilight hack with gamma loader and your GC blackup launcher. Games are backups, some multi, some single, all working fine with previous versions, just not 2.0. Hope that helps.


-Slick

Has anyone else had this problem. This is exactly the problem I am having. No Controller functioning in game.

 

[Jero25]

Hey WiiGator.... First off, THANKS for this awesome Loader. Everyone has wanted a WII GC loader for years now and you finally pulled it off. You are THE MAN, and thanks again for what must have been a lot of grueling hours of hard work.

On a lighter note, your last two versions have worked great, but the current version 2.0 caused my gamecube controller to stop working once the game loads. The controller works fine during your backup launcher screen, but once the game loads none of the buttons will respond. I cant press "start" to load the game or anything else, so the opening videos just keep looping. I have tested the games and controller with your previous versions and they work perfectly, but 2.0 gives me a complete GC controller failure in the game.

Just for reference, ..... softmodded Wii only, no hard mods, never updated, version 3.1U, twilight hack with gamma loader and your GC blackup launcher. Games are backups, some multi, some single, all working fine with previous versions, just not 2.0. Hope that helps.


-Slick

Has anyone else had this problem. This is exactly the problem I am having. No Controller functioning in game.

I had exactly the same problem on V2. Also troubled with the black and white stuff (that's out of the question right now, but I mention it because maybe its related, I don't know)

Has anyone already had an answer on this? I've searched GBA, googled it, and nothing

 

[Jero25]

To unplug the controller inmediately after the game starts loading, and plugging it again once it has loaded will do the trick.

 

[shox3]

First off I would like to say a big thank you to the people behind the gamecube backup launcher. My only criticism is that Cel Damage isn't supported and I really really really wanted to play that game. Hopefully it won't be too long before all games are supported. Keep up the good work and please add support for Cel Damage sooner rather than later.

 

[rael]

hey maan you now you aree thee superman of the wii! all of us are truly happy with all of this!
i want to thank you and tell you to keep te good work!

just a litle question, i try to run splinter cell chaos theory and double agent, but they freeze when i try to start a game( if I start with the A button) it sais read error etc

when I try to stat pressing the start button, they go well, i can play etc etc but when it comes for example in chaos theory, when I try to pass a door it freezes and sais error disc read..

am I doing someting wrong? because I readed that another man had that problem but the only diference is that his game freezes after he save, so he only have to reset the game and keep playing!

please someone help!

 

[justmike]

Alien Hominid works but don't shrink it. Also, when it works, there is no music, just sound... why is that?

I have the original disc in (NTSC) and it doesn't work on my PAL Wii. All my other original NTSC games for GameCube work on my Wii.

Alien Hominid doesn't even load via disc channel, other original NTSC games do.

It loads using Geko, backup launchers, GC Boot but after it checks the memory card it just hangs and "there has been an error, please restart the console and refer to the nintendo manual."

Why?

 

[motakay]

Are there eny more updates coming? I am really happy with all your work you have put in this. I so much want to play Star Fox Adventures, but with the current release the sound is off. Is there any way to fix this?

 

[Mr Slayer]

Hi

I'am using cmios rev 3 and Gc backyup lancer o.2

Rogue leader II NTSC works without any problem

But Rogue Leader III NTSC doesn't work. I can see the first screen with name of the game, developer etc and it freezes.
I press b button for mios patch, R button for 480p and Y button for ntsc.

Any suggestions?

try using a pal version of the game

 

[mastacut]

Is it possible to make a Gamecube backup Laucher Autoboot like Backup loader 0.3 autoboot ?

I Think Wiitgator can do it and it will be very practice.

Thanks

 

[kevenz]

Are there eny more updates coming? I am really happy with all your work you have put in this. I so much want to play Star Fox Adventures, but with the current release the sound is off. Is there any way to fix this?

You're supposed to have sound with GC launcher 0.2 and the wiigator cmios.

The only thing that's missing is the voice..... other than that, all the other sounds and music works for me.

 

[nuva]

do i need a gamecube controller for this or does it work with the classic controller as well?

 

[Retal]

I wish someone were able to continue this project to fix the outstanding problems - namely missing audio issues in a number of games.

 

[Cyan]

does modchip conflict with backup launcher ?

I have a Wiikey 1 (1.9s) with gamecube audio fix.
I'm on 3.2E, no preloader, no cIOSCORP, cIOS249 rev14
Multi iso disc is working fine, but I wanted to play a multi disc game on a multi iso disc and I read backup launcher could do it.

I wished to try the change disc feature so I installed cMIOS included in 0.2, and run backup launcher 0.2
the launcher start reading the DVD, the picture is jumping once like if it's changing display mode from 50 to 60Hz, get back and print this error, with originals, single or multi iso.

failed to read DVD 263
error 53100 ready

Then the game menu inside the launcher isn't showing, instead GCOS or the original game runs automatically.

I tried reinstalling cMios v8 twice, with and without disc channel patch. I tried launching from HBC and from disc channel.
I also tried without cMios patched, It didn't work either. (it doesn't show the error, just run GCOS or original game directly)

Did I do something wrong ? Do I need to try other Mios version, or previous launcher version ?

failed to read dvd 263
Error 0x52400 Ready

You will always get that text when you start up an original disc though.

If this error is always shown with original, does that mean GC backup launcher think my discs are originals because the modchip trick the Wii drive?
Do I need to disabled Gamecube reading from my Wiikey and let GC Launcher deal with it ?

 

[Signtist]

Every time I try to play a game with this program, it gets to the screen that says "Backup Launcher" then freezes. The disk drive then makes a sound like it's booting the game, but then makes a grinding noise and stops. I thought it was the disk, but i made a new backup and still got the same problem. Can someone help? I'm trying to play Cubivore. According to the compatibility list, it works fine.

 

[cheech794]

Every time I try to play a game with this program, it gets to the screen that says "Backup Launcher" then freezes. The disk drive then makes a sound like it's booting the game, but then makes a grinding noise and stops. I thought it was the disk, but i made a new backup and still got the same problem. Can someone help? I'm trying to play Cubivore. According to the compatibility list, it works fine.

Bump^^^^

Except that mine used to work and now all of a sudden it stopped and is doing the same thing that the above guys is doing. Starts to read it, disk spins, gets past " Backup Launcher" screen.

 

[Signtist]

Well, i figured out that you can't have rev 15 installed in order to play this. I installed 13b and it works, but everything is in black and white. I know this has been asked before, but to my knowledge, it has never been fixed. I saw somewhere that by installing RVL-cmios-v4-v3.6-WiiGator.wad from cIOSOCORP 3.6 fixed it, but i did that and the problem still occurred. Is there still something else I need to install from that folder, or has the problem just never been fixed?

 

[hockey11]

thanks wiigator

i was wondering this backup launcher supports a multi iso disk?
and can i also play my legit gamecube games with this without problems

thanks