Hacking Question error code 2002-4315

[bk300]

Hi guys, please help.

After downgrade to 3.0.1 it keep stuck in rcm mode.

I tried to inject ReiNX.bin to boot it up it succeed inject but it showed up the error code 2002-4315.

i did hold the power button 12 Seconds it won't boot up.

my question is Can anyway to fix my switch with rcm mode? anyway to flash the Firmware in rcm mode?

 

[templeofhylia]

assuming you downgraded with ChoiDujourNX, did you enable autoRCM? i'm guessing your burnt fuse count is too high for 3.0.1 and the switch won't boot unless you skip the fuse check.

 

[bk300]

assuming you downgraded with ChoiDujourNX, did you enable autoRCM? i'm guessing your burnt fuse count is too high for 3.0.1 and the switch won't boot unless you skip the fuse check.

Yes, you are right. Can anyway to skip the fuse check or upgrade it back to the latest firmware?

 

[templeofhylia]

Yes, you are right. Can anyway to skip the fuse check or upgrade it back to the latest firmware?

if you have autoRCM installed, the fuse check should be bypassed... when the switch is completely turned off, turning it on just leaves the screen black right?

you can change your console's firmware from coldboot by following this guide, which involves mounting your BOOT0/1 partitions, as well as the eMMC to manually install the proper firmware files. if you're going to upgrade your firmware, don't go beyond 6.1, since 6.2 is not supported right now.

 

[bk300]

Yes, i did completely turned off and on couple times. no matter what when I turned it on it automatically on crm mode(black screen).

 

[templeofhylia]

Yes, i did completely turned off and on couple times. no matter what when I turned it on it automatically on crm mode(black screen).

that's good, you have autoRCM installed, which is the only way you're going to be able to boot the 3.0.1 firmware at the moment. how do you send payloads to your switch? do you see the ReiNX splash screen when you send ReiNX.bin immediately followed by an error? is the error from the switch OS or is it from ReiNX? if i had visuals of your situation i'd be able to understand a little bit more....

 

[bk300]

that's good, you have autoRCM installed, which is the only way you're going to be able to boot the 3.0.1 firmware at the moment. how do you send payloads to your switch? do you see the ReiNX splash screen when you send ReiNX.bin immediately followed by an error? is the error from the switch OS or is it from ReiNX? if i had visuals of your situation i'd be able to understand a little bit more....

The error pop-up after the ReiNX fully loaded( ReiNX splash screen fully loaded). After the Nintendo logo it showed up error. It should be firmware error.

 

[templeofhylia]

The error pop-up after the ReiNX fully loaded( ReiNX splash screen fully loaded). After the Nintendo logo it showed up error. It should be firmware error.

hmm. your error code falls in the 2002-4301 to 2002-4500 range, which is documented on nintendo's support site.
since the ReiNX splash is appearing, i'm assuming you're booting with a microSD card inserted into the console.
try fully powering it off, removing the SD card, booting into RCM, and launching ReiNX. you'll get an error saying the SD card couldn't be found, but you can just press one of the VOL buttons to bypass it. if you launch without an error, the problem lies in the SD card.

 

[bk300]

OK, I'll try that after I got home. I'm out side right now. Thank you so much buddy. If have any questions later can I ask you again? @templeofhylia

 

[templeofhylia]

OK, I'll try that after I got home. I'm out side right now. Thank you so much buddy. If have any questions later can I ask you again?

no problem at all, i wish i was more of an expert and could give you a definitive answer from the get-go! you can absolutely ask again if you have more questions, we wanna get your switch functional after all.

edit: hm, just out of curiosity, did you make this thread too? two different users but the first post is verbatim a copy of this one...

 

[bk300]

no problem at all, i wish i was more of an expert and could give you a definitive answer from the get-go! you can absolutely ask again if you have more questions, we wanna get your switch functional after all.

edit: hm, just out of curiosity, did you make this thread too? two different users but the first post is verbatim a copy of this one...

Yes, That's my thread too. Because I posted it right there for so long but nobody answer. That's why I started a new thread. I'm sorry about that. I'll delete or edit it Right now.

 

[templeofhylia]

Yes, That's my thread too. Because I posted it right there for so long but nobody answer. That's why I started a new thread. I'm sorry about that. I'll delete or edit it Right now.

oh pbbthh, doesn't bother me. i was just confused... and genuinely for a second thought i was assisting a bot and leaving the real person in the dust or something (even though your responses are very un-bot like... i'm just silly paranoid like that)

a mod might care but i ain't one of those , although i am a tad bit curious why you made a brand new account for that...

 

[bk300]

oh pbbthh, doesn't bother me. i was just confused... and genuinely for a second thought i was assisting a bot and leaving the real person in the dust or something (even though your responses are very un-bot like... i'm just silly paranoid like that)

a mod might care but i ain't one of those , although i am a tad bit curious why you made a brand new account for that...

Sad. Because the new user from this FORUMS only allow post once a day. that's why.

 

[bk300]

oh pbbthh, doesn't bother me. i was just confused... and genuinely for a second thought i was assisting a bot and leaving the real person in the dust or something (even though your responses are very un-bot like... i'm just silly paranoid like that)

a mod might care but i ain't one of those , although i am a tad bit curious why you made a brand new account for that...

Thank youso much Buddy. it works. Finally I fixed the error problem.

 

[templeofhylia]

Thank youso much Buddy. it works. Finally I fixed the error problem.

booting without an SD card worked? perfect!! ...kind of. so there's a problem on your SD card that needs to be diagnosed.
i suggest right now, if you have a lot of data on the card, to start making a backup of it in case the troubleshooting reaches the point where the card has to be re-formatted.
what kind of data is on the SD card? have you installed any NSPs to it?

 

[bk300]

booting without an SD card worked? perfect!! ...kind of. so there's a problem on your SD card that needs to be diagnosed.
i suggest right now, if you have a lot of data on the card, to start making a backup of it in case the troubleshooting reaches the point where the card has to be re-formatted.
what kind of data is on the SD card? have you installed any NSPs to it?

yes. I did backup and format the card and put it back to the card. now work perfectly. Thank you bro.

one more question: should i uninstall the autorcm right now or keep it? and how to uninstall it?

 

[templeofhylia]

yes. I did backup and format the card and put it back to the card. now work perfectly. Thank you bro.

one more question: should i uninstall the autorcm right now or keep it? and how to uninstall it?

if you uninstall autoRCM right now, your switch will not be able to boot at ALL. you mentioned that you "downgraded" to 3.0.1, which means your burnt fuse count is likely too high. what firmware did you downgrade from?
your options are:
- stay on 3.0.1 firmware with an autoRCM installation
- update your switch's firmware to the original firmware you downgraded from using ChoiDujour/ChoiDujourNX and then remove your autoRCM installation, but you'll need a way of accessing RCM manually with something like a jig whenever you want to use homebrew.

i personally like having autoRCM so i don't have to worry about using a jig, and i have an SX OS dongle so i don't need a computer to send payloads. i also don't mind that the shut off process is a lot longer, i just use sleep mode.

it's up to you!

edit: sorry, you're welcome too! glad i was able to help.

 

[bk300]

if you uninstall autoRCM right now, your switch will not be able to boot at ALL. you mentioned that you "downgraded" to 3.0.1, which means your burnt fuse count is likely too high. what firmware did you downgrade from?
your options are:
- stay on 3.0.1 firmware with an autoRCM installation
- update your switch's firmware to the original firmware you downgraded from using ChoiDujour/ChoiDujourNX and then remove your autoRCM installation, but you'll need a way of accessing RCM manually with something like a jig whenever you want to use homebrew.

i personally like having autoRCM so i don't have to worry about using a jig, and i have an SX OS dongle so i don't need a computer to send payloads. i also don't mind that the shut off process is a lot longer, i just use sleep mode.

it's up to you!

edit: sorry, you're welcome too! glad i was able to help.

Alright. I think i just stay having autoRCM. it really don't bother me at all. Thank you again.

 

[templeofhylia]

Alright. I think i just stay having autoRCM. it really don't bother me at all. Thank you again.

no problem, enjoy your switch again!

 

[Cgen]

no problem, enjoy your switch again!

Hi templeofhylia,i have the same problem as bk300, could you help me out. i try disable rcm mode
but now every time i press the power on after the nintendo logo disappear i still get an error. i can't get into rcm mode now.

--------------------- MERGED ---------------------------

is there any way to get into the cfw so i can upgade back to 6.01 using ChoiDujourNX other then the guide that you post.thanks