EDM-030 Missing Components Near F7002

[SassySquatch1990]

Missing a Cap and Resistor on this EDM-030 near the F7002 area. The ps5 beeps but will not turn on. Wondering if these missing compnents are the cause. UART says

"00 11/11/2024 6:33:17 PM 80871055 Low SSD Banks IO Error Between SSD Controller
|-(OK 00000000 80871055 00000EF8 FFFF0042 10000000 203B 0004 FFFF FFFF:B9)"

Cant seem to find any shorts or liquid metal anywhere. but i did fine these two missing components. Any help is appreciated

\

 

[stetofix]

Check the ssd. This error 80871055 normaly points to a problem with a ssd nand ic.
The circuit on your picture is fine, as I guess this is a j20h104 wifi ic with only one power input. On the back side the second bug converter circuit should be empty.

 

[SassySquatch1990]

Check the ssd. This error 80871055 normaly points to a problem with a ssd nand ic.
The circuit on your picture is fine, as I guess this is a j20h104 wifi ic with only one power input. On the back side the second bug converter circuit should be empty.

i found some LM on the heat shield . Person brought me this console all torn apart already. Strating to find small traces of LM FML i think the ssd would ned replaced our atleast reballed to see if any lm is under

Post automatically merged: Nov 12, 2024

Check the ssd. This error 80871055 normaly points to a problem with a ssd nand ic.
The circuit on your picture is fine, as I guess this is a j20h104 wifi ic with only one power input. On the back side the second bug converter circuit should be empty.

i do know for sure the circuit is missing a cap and resistor in the top right. But this should not stop the power on.

im getting one beep but no light or nothing

 

[stetofix]

If the WFi ic is an j20h104 the components are not missing.
If you remove the ssd nand ics, make sure to mark each ic and the spot where they belong.

 

[SassySquatch1990]

wifi module model is awxm546

Post automatically merged: Nov 12, 2024

If the WFi ic is an j20h104 the components are not missing.
If you remove the ssd nand ics, make sure to mark each ic and the spot where they belong.

rt5127 is the only thing i see that heats up under the thermal cam when trying to power on. But this is probably not the issue

 

[stetofix]

Are there any shorts around the RT5127/DA9081?

 

[SassySquatch1990]

Are there any shorts around the RT5127/DA9081?

caps to the lft beep on both sided but one side is 4ohm so i assumed it wasnt a dead short

 

[stetofix]

On the button left side the Ohms should be in the kOhm range and on the bottom right side aprox 80 Ohms.

 

[SassySquatch1990]

On the button left side the Ohms should be in the kOhm range and on the bottom right side aprox 80 Ohms.

when i get off work tonight i will take Ohm measurments on said caps