CharAznable said:Just letting everyone know, Super Scribblenauts works on M3 Real now, using Wood M3.
where can i download the newest version of Wood M3???
Thanks!
CharAznable said:Just letting everyone know, Super Scribblenauts works on M3 Real now, using Wood M3.
CharAznable said:Just letting everyone know, Super Scribblenauts works on M3 Real now, using Wood M3.
Yes, please do tell where to get this latest version. Is it bundled with Ninetails? Last I saw, Wood M3 wasn't getting updated until woodrpg's SVN got updated ... and it's still at release 58.
Edit:
Looking at the latest WAIO release notes, which includes the binaries used for WoodM3, yes, we have a solution!!!
CODE1.06c.101021
Merged 1.14.2 r4loader.nds.
Added Super Scribblenauts support.
Loaders use devkitARM r32 / libnds 1.4.8.
Now loaders check fragments using more fuzzy method...
pudquick said:Attention All: M3 DS Real now has a Super Scribblenauts solution! Confirmed!!!
Steps:
1.) Backup your SD card content and wipe it with a formatting tool that zeros out all the bytes. (I think I've seen the Panasonic formatter mentioned around here)
2.) Install the latest Sakura for M3 DS Real: M3 Sakura v1.49X (M29)
3.) Download this file: http://leafmoon.users.sourceforge.net/xeno.../m3_ninetail.7z
4.) 7-unzip it.
5.) Copy your clean Super Scribblenauts dump to your SD card (make any folders (NDS) you want to place it in, first)
6.) Copy the "woodm3.nds" and "__rpg" folder from the .7z file when you unzipped it to your SD card.
7.) Boot Sakura. Select "woodm3.nds"
8.) Select and run Super Scribblenauts.
9.) It will complain that the .sav file is fragmented and say "Halt." at the top. This is normal. Turn off your DS.
10.) Copy the .sav file it created on your SD card back to your computer.
11.) Delete the .sav file from the SD card, then copy it back from your computer to the SD card.
12.) Boot your DS again. Launch Sakura, load "woodm3.nds" - and enjoy your Super Scribblenauts!!
pudquick said:Attention All: M3 DS Real now has a Super Scribblenauts solution! Confirmed!!!
Steps:
1.) Backup your SD card content and wipe it with a formatting tool that zeros out all the bytes. (I think I've seen the Panasonic formatter mentioned around here)
2.) Install the latest Sakura for M3 DS Real: M3 Sakura v1.49X (M29)
3.) Download this file: http://leafmoon.users.sourceforge.net/xeno.../m3_ninetail.7z
4.) 7-unzip it.
5.) Copy your clean Super Scribblenauts dump to your SD card (make any folders (NDS) you want to place it in, first)
6.) Copy the "woodm3.nds" and "__rpg" folder from the .7z file when you unzipped it to your SD card.
7.) Boot Sakura. Select "woodm3.nds"
8.) Select and run Super Scribblenauts.
9.) It will complain that the .sav file is fragmented and say "Halt." at the top. This is normal. Turn off your DS.
10.) Copy the .sav file it created on your SD card back to your computer.
11.) Delete the .sav file from the SD card, then copy it back from your computer to the SD card.
12.) Boot your DS again. Launch Sakura, load "woodm3.nds" - and enjoy your Super Scribblenauts!!
Woohoo it works. Hooray for WoodM3.pudquick said:Attention All: M3 DS Real now has a Super Scribblenauts solution! Confirmed!!!
About time.... the only thing is.... this still isnt even an official update. M3 has been abandoned confirmed.pudquick said:CharAznable said:Just letting everyone know, Super Scribblenauts works on M3 Real now, using Wood M3.
Yes, please do tell where to get this latest version. Is it bundled with Ninetails? Last I saw, Wood M3 wasn't getting updated until woodrpg's SVN got updated ... and it's still at release 58.
Edit:
Looking at the latest WAIO release notes, which includes the binaries used for WoodM3, yes, we have a solution!!!
CODE1.06c.101021
Merged 1.14.2 r4loader.nds.
Added Super Scribblenauts support.
Loaders use devkitARM r32 / libnds 1.4.8.
Now loaders check fragments using more fuzzy method...
The m3loader in M3Ninetails from the official site has indeed been date stamp updated to Oct 21st and should include this patch!
http://leafmoon.users.sourceforge.net/xeno.../m3_ninetail.7z
Totally going to try this tonight / when I get home
QUOTE said:Do I need Sakura, it wont work on my M3.
But anyway, it tells me my nds file is fragmented. Not my sav. Do you know what to do?
Does this WoodM3 fix work for the M3i??pudquick said:QUOTE said:Do I need Sakura, it wont work on my M3.
But anyway, it tells me my nds file is fragmented. Not my sav. Do you know what to do?
No, after further testing, woodm3 boots just fine from TouchPod (the normal M3 DS Real firmware). Sakura is not needed, which is great - because I have a nice skin for TouchPod and Sakura's always felt unstable to me. You will likely want to update to the latest TouchPod / M3 DS Real firmware though.
If it's telling you the NDS file is fragmented, then try copying the .nds file to your computer, deleting it off the SD card, then copying it back.
"Fragmented" means that when your computer tried putting the .nds file (or when the .sav file was created / saved), it couldn't find enough continuous free space on the SD card. As such, it broke the file into pieces and stored them at different locations on the SD card.
Normally, for computers and such, this isn't a problem - because the list of all the pieces and what order they go in is also stored on the SD card.
For woodm3, however, they didn't actually implement full FAT16/FAT32 support. Instead, they just find where the beginning of your .nds/.sav file is - and then it assumes / requires that all of the data be in one continuous piece at that location.
This is why I included the steps about zero-ing out the SD card / reformatting it. If you use your SD card a lot, as you add / remove files from it, you start fragmenting the data on it because the computer uses "whatever space is available" when placing new files on it, even if it means that space isn't all in one big chunk. By zeroing out the card, you ensure that the SD card is empty (and it makes Sakura happier, it has the same fragmentation issues) and gives you a good chance that when you copy the files back, since it was empty and it's adding new files one at a time, that it'll put them one after the other - and keep every file in a single chunk.
The other thing that might help people on here is if someone could find a decent SD card defragmenter. I'm searching for one myself, but in the meantime I'll be playing SS
pudquick said:Attention All: M3 DS Real now has a Super Scribblenauts solution! Confirmed!!!
Steps:
1.) Backup your SD card content and wipe it with a formatting tool that zeros out all the bytes. (I think I've seen the Panasonic formatter mentioned around here)
2.) Install the latest Sakura for M3 DS Real: M3 Sakura v1.49X (M29)
3.) Download this file: http://leafmoon.users.sourceforge.net/xeno.../m3_ninetail.7z
4.) 7-unzip it.
5.) Copy your clean Super Scribblenauts dump to your SD card (make any folders (NDS) you want to place it in, first)
6.) Copy the "woodm3.nds" and "__rpg" folder from the .7z file when you unzipped it to your SD card.
7.) Boot Sakura. Select "woodm3.nds"
8.) Select and run Super Scribblenauts.
9.) It will complain that the .sav file is fragmented and say "Halt." at the top. This is normal. Turn off your DS.
10.) Copy the .sav file it created on your SD card back to your computer.
11.) Delete the .sav file from the SD card, then copy it back from your computer to the SD card.
12.) Boot your DS again. Launch Sakura, load "woodm3.nds" - and enjoy your Super Scribblenauts!!
Nevermind, I tried it and yes the WoodM3 does work on the M3i Zero so now I can play this game. Thanks to the author of WoodM3.Dent said:Does this WoodM3 fix work for the M3i??
fix'dpudquick said:Attention All: M3 DS Real now has a Super Scribblenauts solution! Confirmed!!!
Steps:
1.) Backup your SD card content and wipe it with a formatting tool that zeros out all the bytes. (I think I've seen the Panasonic formatter mentioned around here)
2.) Install the latest Sakura for M3 DS Real: M3 Sakura v1.49X (M29) Link = M3 Sakura v1.49X (M29)+ TouchPod for M3 Real 4.8fX
3.) Download this file: http://www.megaupload.com/?d=RA3OHTTP
4.) 7-unzip it.
5.) Copy your clean Super Scribblenauts dump to your SD card (make any folders (NDS) you want to place it in, first)
6.) Copy the "woodm3.nds" and "__rpg" folder from the .7z file when you unzipped it to your SD card.
7.) Boot Sakura. Select "woodm3.nds"
8.) Select and run Super Scribblenauts.
9.) It will complain that the .sav file is fragmented and say "Halt." at the top. This is normal. Turn off your DS.
10.) Copy the .sav file it created on your SD card back to your computer.
11.) Delete the .sav file from the SD card, then copy it back from your computer to the SD card.
12.) Boot your DS again. Launch Sakura, load "woodm3.nds" - and enjoy your Super Scribblenauts!!
Way to bump a dead topic.AsPika2219 said:100% clean version!!!
Super_Scribblenauts_USA_CLEAN_NDS-NukeThis