Hacking Homebrew Change Homebrew Channel banner

[creedof69]

Hello everyone, I'm trying to replace the homebrew channel banner by the pirate channel one. I know other custom homebrew Channel are forwarder to real one and I don't want to have both, just one.
So I used customizemii to import the banner, icon and sound of the PIR8 channel to the LULZ channel. In the Wii menu the banner is fine but now the channel shows every single time the hackmii installer safety screen during an eternity and ask me to press (1) and then display directly the hbc normally.
Is there a way to make it works ?

 

[XFlak]

What hbc did u begin with? Was it this one? https://github.com/Wii-Mini-Hacking/hbc/releases

 

[creedof69]

What hbc did u begin with? Was it this one? https://github.com/Wii-Mini-Hacking/hbc/releases

No I use the 1.1.2 version. The wad extracted of my Wii is named "v258". Else I use the 1.1.4 but only on Wii U
Isn't this 1.1.5 only for Wii mini ?

 

[XFlak]

"Open Homebrew Channel v1.1.5 WAD with title ID LULZ; this is the same as fail0verflow's v1.1.3 but with it's Title ID changed to LULZ. Technically it works on both Wii & vWii but is only recommended for Wii." ~ModMii

Edit: also if u use 1.1.3+ it should solve your issue

 

[creedof69]

"Open Homebrew Channel v1.1.5 WAD with title ID LULZ; this is the same as fail0verflow's v1.1.3 but with it's Title ID changed to LULZ. Technically it works on both Wii & vWii but is only recommended for Wii." ~ModMii

Edit: also if u use 1.1.3+ it should solve your issue

Thanks I will try tomorrow but I if I use 1.1.3 or 4 channel, that is OHBC ID, the results would be that the hbc icon on bootmii will not work ?

Post automatically merged: Apr 13, 2025

"Open Homebrew Channel v1.1.5 WAD with title ID LULZ; this is the same as fail0verflow's v1.1.3 but with it's Title ID changed to LULZ. Technically it works on both Wii & vWii but is only recommended for Wii." ~ModMii

Edit: also if u use 1.1.3+ it should solve your issue

Alright so, with 1.1.4 OHBC everything works but can't run hbc from bootmii. With 1.1.5 LULZ I can run hbc from bootmii, the channel works but, in a way, I can't get back to the hbc when I use some hombrew like YAWM or YABDM. so any solution have a cons ...

Edit: ok so the 1.1.5 "directly downloaded" Fully works. I had tested the 1.1.4 and change its ID from OHBC to LULZ with customizemii but it seems that it doesn't change it for "homebrew connection". When YAWM and YABDM froze it's the same freeze when I run them without an actual hbc installed