Hacking Black screen after payload injection, usb-c issue?

[nimio]

Hello,

I buyed a Nintendo Switch with broken usb-c repaired by me, with serial XAJ70008 and 9.1 firmware.

I try FAT32 and exFAT sdcard format with some payloads: Hekate, Atmosphere... and nothing, after injecting payload screen becomes black.

I don't know what happens, I tested the Switch in a Dock and works and I can inject the same payloads in other Switch with the same SDCard with same files.

Can be an usb-c issue? which pins usb-c needs for payload? If Switch works in a dock then usb-c good repaired I think.

The console system is the same from his first owner, no reset, only 9.1 firmware update.

TegraRCMGui detects the console, the icon turns green when connected in RCM mode.

Any Idea?

Please, I appreciate some help.

Regards.

 

[BaamAlex]

Dude...read the stickied thread here. Your console is definitely patched.

--------------------- MERGED ---------------------------

with serial XAJ70008 and 9.1 firmware

Wait...is it XAJ70008 or XAJ7008?

 

[Jayro]

My console is a launch switch, and only boots SX OS fine, but launching any other payloads just give me a black screen. I'm on the latest firmware and the latest payloads+latest SX OS... Tried many SD cards, FAT32 and exFAT, and nothing helps.

 

[BaamAlex]

My console is a launch switch, and only boots SX OS

You have a fusée gelée unit. It can boot EVERY payload. And it can be hacked on every firmware with every cfw

 

[Jayro]

You have a fusée gelée unit. It can boot EVERY payload. And it can be hacked on every firmware with every cfw

I'm aware, but no matter what I try, I have never been able to boot Atmosphere, it no longer will launch any payloads from Boot.dat anymore, etc. I dunno what the issue is.

 

[nimio]

Dude...read the stickied thread here. Your console is definitely patched.

--------------------- MERGED ---------------------------


Wait...is it XAJ70008 or XAJ7008?

It's XAJ70008, due to https://ismyswitchpatched.com/: "Your console is not patched. Hooray!"

Maybe if I locate the usb-c test points in the pcb (I don't know where) I can solder some wires with another usb-c only for testing and discard or detect an usb-c issue .

Some ideas with this problem?

Regards.

 

[BaamAlex]

I'm aware, but no matter what I try, I have never been able to boot Atmosphere, it no longer will launch any payloads from Boot.dat anymore, etc. I dunno what the issue is.

You know that you need the cfw files on your sd card?

 

[Jayro]

You know that you need the cfw files on your sd card?

Yes. I've tried it ALL trust me.

 

[dikkik]

any solution? I am having the same issue. Although I am using parallels on Mac. I will try Windows 10 when i have access to one.