Hacking Black Screen after Atmosphere Logo

[kuchentraum]

Hello, I am really desperate.
I updated my switch to 11.0.0.0. Because I had problems with overwriting the atmosphere files (switch only showed error messages after that), I formatted the SD card (Fat32) and added atmosphere completely new (i get from "sdsetup" the data).
I downloaded the latest sigpatches from this forum and put them into the Atmosphere folder.

After that I tried to start the switch via TegraRcm. With the "fusee primary.bin" i only see the logo and the screen stays black. with the hekate_ctcaer_5.5.0.bin i get the error " Missing LP0 (sleep mode) lib/ update bootloader folder press any key"
when I do that, he charges hekate normally.
Updating the bottleloader did not help either.
I have no idea what else I should do or what I did wrong. Does anybody have an idea and would you please help me?

 

[worm28]

copy the bootloader folder from hekate_ctcaer_5.5.0 to your sd card.

 

[kuchentraum]

copy the bootloader folder from hekate_ctcaer_5.5.0 to your sd card.

Thanks for your answer, I just did it again (and replaced the data) but unfortunately I still get the same error

 

[HollowGrams]

Thanks for your answer, I just did it again (and replaced the data) but unfortunately I still get the same error

Start Fresh. Put Atmosphere 16.0 on your sd card. Use these patches: https://github.com/ITotalJustice/patches/releases/download/11.0.0-0.16.0p2/fusee.zip

Inject fusee-primary.bin payload however and you should load in to home menu.

 

[kuchentraum]

Start Fresh. Put Atmosphere 16.0 on your sd card. Use these patches:

Inject fusee-primary.bin payload however and you should load in to home menu.

i am really at the end with my knowledge. I replaced the data completely and the sigpatches too (as you wrote). Then I booted with the "fusee primary.bin" (the current version). I still get a black screen after the logo. I have no idea what is wrong with withe switch. Booting into sysnand works fine.

 

[linuxares]

Delete Atmosphere folder and Sept.

Then copy the fresh once over.

 

[kuchentraum]

Delete Atmosphere folder and Sept.

Then copy the fresh once over.

Unfortunately I only get a blackscreen again

 

[linuxares]

Unfortunately I only get a blackscreen again

Just to make life easy - https://github.com/Team-Neptune/DeepSea

Try using this, and inject hekate instead. Just to see it works fine.

 

[kuchentraum]

Just to make life easy

Try using this, and inject hekate instead. Just to see it works fine.

Oh my God, thank you from the bottom of my heart. I don't know why, but the "Noob" solution worked now. Thanks so much to you and everyone else who tried to help. I don't know what exactly I did wrong, it's not the first time I've updated atmosphere, but somewhere I must have made an extremely stupid mistake.

 

[linuxares]

Oh my God, thank you from the bottom of my heart. I don't know why, but the "Noob" solution worked now. Thanks so much to you and everyone else who tried to help. I don't know what exactly I did wrong, it's not the first time I've updated atmosphere, but somewhere I must have made an extremely stupid mistake.

It's fine. I recommended AtlasNX Kosmos before and Deepsea is more or less Kosmos v2.0. So use it. It helps a lot of you don't tinker a lot.

 

[brave1]

can anyone please help me out here i have a problem when i try to load my Atmosphere dongle on the switch payload hekate_ctcaer_5.5.0.bin screen go's black and some times it wont turn on

 

[IDris]

can anyone please help me out here i have a problem when i try to load my Atmosphere dongle on the switch payload hekate_ctcaer_5.5.0.bin screen go's black and some times it wont turn on

happened the same to me, i just went back to old backup

 

[Draxzelex]

can anyone please help me out here i have a problem when i try to load my Atmosphere dongle on the switch payload hekate_ctcaer_5.5.0.bin screen go's black and some times it wont turn on

Have you updated Atmosphere as well?

 

[Barley9093]

Have you updated Atmosphere as well?

I have, same problem. New atmosphere install, fresh fusee, still no boot. I get the splash screen that says atmoshpere, then the black screen with the atmosphere logo, then nothing.

 

[impeeza]

I have, same problem. New atmosphere install, fresh fusee, still no boot. I get the splash screen that says atmoshpere, then the black screen with the atmosphere logo, then nothing.

resurecting a more than 1 year thread will give you no answer.

you can ask on Noobs Paradise

or try to follow the instructions of https://gbatemp.net/posts/9835101/

 

[Vflame13]

Hello, I am really desperate.
I updated my switch to 11.0.0.0. Because I had problems with overwriting the atmosphere files (switch only showed error messages after that), I formatted the SD card (Fat32) and added atmosphere completely new (i get from "sdsetup" the data).
I downloaded the latest sigpatches from this forum and put them into the Atmosphere folder.

After that I tried to start the switch via TegraRcm. With the "fusee primary.bin" i only see the logo and the screen stays black. with the hekate_ctcaer_5.5.0.bin i get the error " Missing LP0 (sleep mode) lib/ update bootloader folder press any key"
when I do that, he charges hekate normally.
Updating the bottleloader did not help either.
I have no idea what else I should do or what I did wrong. Does anybody have an idea and would you please help me?

Hi I have the same problem. I did a downgrade by daybreak from 14.1.2 to 11.0.0 and after having injected atmosphere i see only black screen. I'm desperate too i really need help please can someone tell me what i can do to solve this problem?