arm9 prefetch abort when turning off n3dsxl

[camicami]

Hi!!

I recently bought a n3dsxl that was already homebrewed. Today when I turned off the console it appeared this error (Arm 9 prefetch abort svcBreak).
Can somebody explain to me what's happening and how can i fix it? Pleaseee I know nothing about this stuff.

 

[CoolMe]

Hi!!

I recently bought a n3dsxl that was already homebrewed. Today when I turned off the console it appeared this error (Arm 9 prefetch abort svcBreak).
Can somebody explain to me what's happening and how can i fix it? Pleaseee I know nothing about this stuff.

You can't access the home menu? What about when you remove the sd card?
Can you access Luma3DS (holding start on boot), or GodMode9 (holding select on boot)?
What firmware are you on?
What's the last thing you did with your system? Did you install some theme, a cia etc.?

 

[camicami]

You can't access the home menu? What about when you remove the sd card?
Can you access Luma3DS (holding start on boot), or GodMode9 (holding select on boot)?
What firmware are you on?
What's the last thing you did with your system? Did you install some theme, a cia etc.?

With the SD card inside, I can access the Home menu but when I turn it off the same error appears.
When I remove the SD card it appears Luma 3DSv11.0 configuration.
When i press start on boot it appears Luma3DS Chainloader.
And when i press select on boot it appears the Luma 3DSv11.0 configuration again.
The only thing I did before the error was opening a few gifts game the seller put in the console.

 

[CoolMe]

With the SD card inside, I can access the Home menu but when I turn it off the same error appears.

Does the ErrDisp error appear randomly, or just when you try to launch a game or turn off the 3ds?
What about system settings, can you access it without getting the error?

When I remove the SD card it appears Luma 3DSv11.0 configuration.
When i press start on boot it appears Luma3DS Chainloader.
And when i press select on boot it appears the Luma 3DSv11.0 configuration again.

Ok that's good, remove the sdcard, and turn it on, of you see Luma3DS Menu make sure "show user nand string" is checked and hit start, once you're in the home menu, try launching some system apps etc. and see if you'd encounter the error. If not, then it's probably an sd card issue..

The only thing I did before the error was opening a few gifts game the seller put in the console.

After doing the suggestions above, if indeed you didn't encounter any errors when the sd card was removed, then i suggest checking that sd card for errors with h2testw. Copy/paste all the sd card's data to somewhere safe on your pc, then format it as FAT32 32kb clusters and run h2testw with the "read & verify" option. It will tell you if it's fake or faulty. Post the results here after you are done.

 

[camicami]

The Error appears once every 2 turn off.
Yes, I can access the settings with the sd card and with the "show user nand string" no problem.
I copied and paste the sd card's files and format it .
But the option "Write + verify" was not possible. I did the "Verify" option and it appeared this:

Test finished without errors

Post automatically merged: Jan 26, 2023

Does the ErrDisp error appear randomly, or just when you try to launch a game or turn off the 3ds?
What about system settings, can you access it without getting the error?

Ok that's good, remove the sdcard, and turn it on, of you see Luma3DS Menu make sure "show user nand string" is checked and hit start, once you're in the home menu, try launching some system apps etc. and see if you'd encounter the error. If not, then it's probably an sd card issue..

After doing the suggestions above, if indeed you didn't encounter any errors when the sd card was removed, then i suggest checking that sd card for errors with h2testw. Copy/paste all the sd card's data to somewhere safe on your pc, then format it as FAT32 32kb clusters and run h2testw with the "read & verify" option. It will tell you if it's fake or faulty. Post the results here after you are done.

The Error appears once every 2 turn off.
Yes, I can access the settings with the sd card and with the "show user nand string" no problem.
I copied and paste the sd card's files and format it .
But the option "Write + verify" was not possible. I did the "Verify" option and it appeared this:

Test finished without errors

 

[CoolMe]

The Error appears once every 2 turn off.

Even when the sd card is removed?

But the option "Write + verify" was not possible.

What do you mean by "it was not possible"?
Check the sdcard lock slider, it should be in the "unlocked position". Also try with another sd card adapter.

 

[camicami]

Even when the sd card is removed?

What do you mean by "it was not possible"?
Check the sdcard lock slider, it should be in the "unlocked position". Also try with another sd card adapter.

I format it again and now is working. I'll let you know when it is finished

Post automatically merged: Jan 26, 2023

Even when the sd card is removed?

What do you mean by "it was not possible"?
Check the sdcard lock slider, it should be in the "unlocked position". Also try with another sd card adapter.

Hi, I'm back. It says Test finished without errors.